C#

FirstPrevNext

.NET & MSN Messenger 6.1 Niels Penneman5-Jan-04 10:27 Niels Penneman 5-Jan-04 10:27  Does anyone know if I can change my MSN nickname with .NET code in an existing MSN Messenger 6 session? I could do it by communicating with the server but I want to keep my Messenger session running... I have seen somebody doing it with VB5 or 6 but the guy doesn't seem to have any website or e-mail address and VBDE could not decompile the executable. I know the application does something with API functions, to open the Options dialog, change the name, close it. It's rather annoying and I want to know if any other methods exist? Note: I already tried the API, but the property MyFriendlyName is not writable... greetz niels penneman Re: .NET & MSN Messenger 6.1 eggie56-Jan-04 13:31 eggie5 6-Jan-04 13:31  There's an example in this book: C# Essentials, 2nd Edition [^] /\ |_ E X E GG GDI Layers Heroz5-Jan-04 8:30 Heroz 5-Jan-04 8:30  Hi guys. Is there any way to draw someting on a panel, then draw something above it and treat those layers separately? I mean, I don't wanna redraw the first layer, when the second changes, neither the second when the first does, because it may takes quiet much time... I've searched about layers in msdn, but found nothing. Tried to set the second panel's backcolor transparent, but even in this case, it does cover the dynamic drawing on the first panel MS Visual Studio.NET 2003 C# Re: GDI Layers Heroz5-Jan-04 9:50 Heroz 5-Jan-04 9:50  "Is there any way to draw someting on a panel, then draw something above it and treat those layers separately?" Well, the panel isn't an important thing... MS Visual Studio.NET 2003 C# Re: GDI Layers Heath Stewart5-Jan-04 9:57 Heath Stewart 5-Jan-04 9:57  You don't need different controls (not layers, that's a different matter) to paint different portions. All you need to do is paint the invalidated regions which are passed to you in the PaintEventArgs of the Paint event (for code handling other controls) or the OnPaint method (for controls extending a control to override). For some things, this isn't always possible or necessary (like for a button, very little needs to be repainted so the whole thing is typically repainted). Just use the PaintEventArgs.ClipRectangle to figure out which regions you need to repaint.   -----BEGIN GEEK CODE BLOCK----- Version: 3.21 GCS/G/MU d- s: a- C++++ UL@ P++(+++) L+(--) E--- W+++ N++ o+ K? w++++ O- M(+) V? PS-- PE Y++ PGP++ t++@ 5 X+++ R+@ tv+ b(-)>b++ DI++++ D+ G e++>+++ h---* r+++ y+++ -----END GEEK CODE BLOCK----- starting other apps? Peter Reiter5-Jan-04 6:54 Peter Reiter 5-Jan-04 6:54  hi can u guys tell me how i can start another application, for example word? after clicking a button it should start thx Re: starting other apps? Guillermo Rivero5-Jan-04 7:07 Guillermo Rivero 5-Jan-04 7:07  Take a look at System.Diagnostics Namespace System.Diagnostics.Process vprocess = new System.Diagnostics.Process() vprocess.Start("WINWORD.EXE") Free your mind... Re: starting other apps? Heath Stewart5-Jan-04 7:15 Heath Stewart 5-Jan-04 7:15  Or simply Process.Start (a static method - an instance of Process isn't necessary). Also, this question has been asked MANY times in the past and even once today just shortly before you asked. Please search the comments before posting.   -----BEGIN GEEK CODE BLOCK----- Version: 3.21 GCS/G/MU d- s: a- C++++ UL@ P++(+++) L+(--) E--- W+++ N++ o+ K? w++++ O- M(+) V? PS-- PE Y++ PGP++ t++@ 5 X+++ R+@ tv+ b(-)>b++ DI++++ D+ G e++>+++ h---* r+++ y+++ -----END GEEK CODE BLOCK----- Re: starting other apps? Guillermo Rivero5-Jan-04 7:22 Guillermo Rivero 5-Jan-04 7:22  How many times have you answered this question ??? Free your mind... Best code for this multithreading issue? profoundwhispers5-Jan-04 6:32 profoundwhispers 5-Jan-04 6:32  Currently, I'm fetching page IDs from an XML file. I want to write code that does the following: 1- Add these IDs to an array? arraylist? some kind of list? 2- Start 5 threads that will access this list simultaneously and download a page from the internet (for example http://www.page.com?pageid=ID) provided that each page should be downloaded only once. 3- These pages are saved on disk. What happens in case of a powercut? How can I know which page did I stop at? Thank you very much. Sammy "A good friend, is like a good book: the inside is better than the cover..." Re: Best code for this multithreading issue? HAHAHA_NEXT5-Jan-04 7:22 HAHAHA_NEXT 5-Jan-04 7:22  1- Create a global variable to give the pages to download and create 5 other variables to specify which page a tread is currently downloading. 2- Each time a tread finishes to download a page, it increases the global variable by one and sets its own variable to the page it curently downloads. 5- Save on a file, all the 5 variables and the gloabal one. In the case of power goes down, you will simply resume the 5 pages and will continue with the gloabl variable. Ex: a,b,c,d,e are the current location of download of all the treads. g is the gloable variable, 1,2,3 ... 20 are pages to download. Stuff in bold is already downloaded. Thus you get: 1 2 3a 4 5 6b 5 7c 8 9 10 11d 12e 13g 14 15 In the case If power goes down, will will simply have to download pages 3,6,7,11,12 and then to continue with pages 13+. Re: Best code for this multithreading issue? Heath Stewart5-Jan-04 7:28 Heath Stewart 5-Jan-04 7:28  profoundwhispers wrote: What happens in case of a powercut? What do you mean a "powercut"? If you mean loss of power, the only way you can know which threads didn't finish is to use a file to persist each thread's URL that they're working on and whether or not they've finished. This is common in many caching situations. As far as using threads, using an array list isn't really necessary because you'll have to pass an index to each thread for them to determine which one to work on. Instead, read each ID from the XML file like you're doing and use asynchronous calls to download the file, like HttpWebRequest.BeginGetResponse. You'll pass an AsyncCallback that can write to that cache file I mentioned. If you track how many IDs you read and then keep a counter for how many times the callback was executed (be sure to use locking to increment the counter to make sure, for instance using the lock keyword) you can know which ID was last (by checking the IAsyncResult.AsyncState, which you would pass into HttpWebRequest.BeginGetResponse - this is used to pass custom data from the async call to the callback for cases such as this). You could also devise a similar situation using the ThreadPool.QueueUserWorkItem, which also uses a delegate to start in a new thread and accepts a state object (which can be a single object of any type, including an array, list, or collection of other objects). The simple Thread class doesn't now allow such state variables and there is additional benefits to using a ThreadPool over simple threads. (See the SDK documentation for details.) I would recommend asynchronous calls, though. The functionality is provided so you might as well use it. Also keep in mind that if you devise your own system using delegates, that the C# compilers (and probably others) automatically add asynchronous versions of the Delegate.Invoke function so you can use delegates asynchronously, too.   -----BEGIN GEEK CODE BLOCK----- Version: 3.21 GCS/G/MU d- s: a- C++++ UL@ P++(+++) L+(--) E--- W+++ N++ o+ K? w++++ O- M(+) V? PS-- PE Y++ PGP++ t++@ 5 X+++ R+@ tv+ b(-)>b++ DI++++ D+ G e++>+++ h---* r+++ y+++ -----END GEEK CODE BLOCK----- custom save/open file dialog misterbear5-Jan-04 6:31 misterbear 5-Jan-04 6:31  Hi. I need to have custom save/open file dialogs but since the .NET ones are sealed it can't be inherited, neither can the FileDialog class from which they inherit. Does anyone know of a good approach to creating a custom dialog for this purpose? What I need is something as simple as an additional textfield rightmost in the dialog. I would really really(!!) want to use the functionality in the available controls. I have come up with two approaches, of which the second I really don't know how to do.. =) either (1) create a new control which aggregates a SaveFileDialog control for some functionality (like opening the stream to file, etc.) or (2) make it 2 separate windows that stay next to each other, and remove the window decoration. any more suggestions? Has anyone done this? Please let me know if you think you can help. Re: custom save/open file dialog Heath Stewart5-Jan-04 7:13 Heath Stewart 5-Jan-04 7:13  I've been discussing this with some other developers - including some Microsoft developers in the forums - and there isn't a way without going to a LOT of work. Basically, you have to encapsulate the functionality of the GetOpenFileName and GetSaveFileName functions, as well as the OPENFILENAME struct. This is what the OpenFileDialog and the SafeFileDialog (which inherit most of the functionality from the FileDialog class) do. The biggest problem is dealing with the dialog template you'd assign to the lpTmeplateName member of the OPENFILENAME structure. In Win32 this isn't too hard because you can use resources (stored in the .rsrc section of a PE (portable executable)). To have this managed is definitely NOT easy! The engineers I even talked to do mentioned something along the lines of "not having time" to do this for 1.0 (which, since it's still not in 1.1 and doesn't appear to be in 2.0 means, "it's too hard"). If you want this managed, there are ways of making a DLGTEMPLATE out of a dialog resource (namely, your Form or Control that will physically extend the open and safe file dialogs), but you have to worry about converting units from pixels to dlg units and a lot more. There was an example I found on the 'net but I don't remember where. Just google for it if you dare try this. You'll need to P/Invoke all that code used in the exmample, as well as things like the GetDeviceCaps to get the proper unit measurements. My recommendation is to write a native DLL that does this instead. You can then encapsulate your own custom open or save file dialogs in a Component like Microsoft does. Just make sure you distribute this native DLL with your application, putting it in a location that can be resolved (like the current working directory or any directory in the PATH environment variable). I don't have a sample because this alternative doesn't really work for my company because we use an Internet-deployed (ala touchless deployment) app and try to avoid native resources at all costs. I found a way around using a different approach.   -----BEGIN GEEK CODE BLOCK----- Version: 3.21 GCS/G/MU d- s: a- C++++ UL@ P++(+++) L+(--) E--- W+++ N++ o+ K? w++++ O- M(+) V? PS-- PE Y++ PGP++ t++@ 5 X+++ R+@ tv+ b(-)>b++ DI++++ D+ G e++>+++ h---* r+++ y+++ -----END GEEK CODE BLOCK----- Re: custom save/open file dialog misterbear5-Jan-04 8:43 misterbear 5-Jan-04 8:43  Ok thanks, great answer =) I don't really mind doing it the native way it's not gonna be a problem for me.. But I'm not really big on windows .dll programming. Do you have any hints / directions as how to do this 'the native way'? Any good links for tutorials or so? Also I once found some kind of solution to this problem my combining multiple windows and make them look like just one. Since I only need to add a component rightmost in the dialog, this would be a possible solution for me... Any ideas as to how this can be done? Re: custom save/open file dialog Heath Stewart5-Jan-04 9:52 Heath Stewart 5-Jan-04 9:52  For an example of encapsulating a custom method and struct, use a decompiler like .NET Reflector[^] and see how the FileDialog and its derivative classes work. That's the best thing I can tell you. You could just have a simple native function in a native DLL that you can call, passing parameters as necessary or use a struct like the OPENFILENAME struct, though you could cut down on the members needed for your implementation. As for the other idea, neither the GetOpenFileName, GetSaveFileName, or the OPENFILENAME struct accept positional values. Since the FileDialogs merely use these functions and structs, it won't know either (nor does it have positional properties of its own). You'll have to get a HWND of the dialog instead, most likely using FindWindow, and you could try encapsulating this by extending the NativeWindow class (a managed wrapper for existing windows) and use AssignHandle, passing the HWND that you got from FindWindow. You could then figure out the position and track it with another window. There might be an easier way to do this alternative, but this is just off the top of my head and without any research. You could search to see if an easier / better way exists.   -----BEGIN GEEK CODE BLOCK----- Version: 3.21 GCS/G/MU d- s: a- C++++ UL@ P++(+++) L+(--) E--- W+++ N++ o+ K? w++++ O- M(+) V? PS-- PE Y++ PGP++ t++@ 5 X+++ R+@ tv+ b(-)>b++ DI++++ D+ G e++>+++ h---* r+++ y+++ -----END GEEK CODE BLOCK----- Easy Form Question Guinness4Strength5-Jan-04 6:19 Guinness4Strength 5-Jan-04 6:19  Anyone ? How do I prevent the user from resizing my Form ? i.e. Dragging the edge of the dialog box to make it wider/taller. AND/OR How do I resize a Tab Control ? Re: Easy Form Question Heath Stewart5-Jan-04 7:04 Heath Stewart 5-Jan-04 7:04  Guinness4Strength wrote: How do I prevent the user from resizing my Form ? Set your Form.FormBorderStyle to FormBorderStyle.FixedDialog. Also, this question was just asked and answered this morning. Please search comments before posting. Guinness4Strength wrote: How do I resize a Tab Control ? Same as any other control - just set its TabControl.Size (as a Size struct - setting the individual properties will not work since it's a value type), or set the TabControl.Width and TabControl.Height properties. All these properties inherit from Control.   -----BEGIN GEEK CODE BLOCK----- Version: 3.21 GCS/G/MU d- s: a- C++++ UL@ P++(+++) L+(--) E--- W+++ N++ o+ K? w++++ O- M(+) V? PS-- PE Y++ PGP++ t++@ 5 X+++ R+@ tv+ b(-)>b++ DI++++ D+ G e++>+++ h---* r+++ y+++ -----END GEEK CODE BLOCK----- Re: Easy Form Question Niels Penneman5-Jan-04 10:11 Niels Penneman 5-Jan-04 10:11  Did you mean resizing a tab control in the designer? You must make sure you don't select a tab page, to resize the control you must select the whole tab control (do not click on a tab or page). To restrict the size of your form you could also use MinimumSize & MaximumSize greetz Niels Penneman Run a External EXE File hxxbin5-Jan-04 6:16 hxxbin 5-Jan-04 6:16  Hi I'm trying to do a Windows Service for a EXE file based at Console. But I don't know how run this file at the background, anyone knows?? Thanks Re: Run a External EXE File Heath Stewart5-Jan-04 7:00 Heath Stewart 5-Jan-04 7:00  This question doesn't make sense. Are you trying to start a normal application? See Process.Start. Are you trying to start a Windows Service? See the ServiceController class. You can find more information about these in the .NET Framework SDK.   -----BEGIN GEEK CODE BLOCK----- Version: 3.21 GCS/G/MU d- s: a- C++++ UL@ P++(+++) L+(--) E--- W+++ N++ o+ K? w++++ O- M(+) V? PS-- PE Y++ PGP++ t++@ 5 X+++ R+@ tv+ b(-)>b++ DI++++ D+ G e++>+++ h---* r+++ y+++ -----END GEEK CODE BLOCK----- Re: Run a External EXE File hxxbin5-Jan-04 7:07 hxxbin 5-Jan-04 7:07  Let me explain about. I already have a console application, that controls a RH DB, and need to be started from a logged user into a w2k server. For this reason, I was thinkin' create a Windows Service, that run this application without a logged user, like any service as IIS. I will check Process.Start but it could be helpful any extra information that you can give me about. Thanks. Re: Run a External EXE File Heath Stewart5-Jan-04 7:37 Heath Stewart 5-Jan-04 7:37  Windows Services do run under user credentials, be they SYSTEM, SERVICE, IUSR_COMPUTERNAME (default for IIS), or a specified user. It just doesn't have to be executed by a logged-in user. You could use a Windows Service, but you should then use the ServiceController class. If you want to allow interaction by controller applications by the user (like a Control Panel applet or some application), you'll need to allow for desktop interaction. If you use the ServiceInstaller and ServiceProcessInstaller classes to install the service, you'll have to use the Microsoft.Win32.Registry class and related classes to set this property in the registry. If you don't need to use an installer (for example, for mass deployment) then you could just use the Services snap-in to do it manually.   -----BEGIN GEEK CODE BLOCK----- Version: 3.21 GCS/G/MU d- s: a- C++++ UL@ P++(+++) L+(--) E--- W+++ N++ o+ K? w++++ O- M(+) V? PS-- PE Y++ PGP++ t++@ 5 X+++ R+@ tv+ b(-)>b++ DI++++ D+ G e++>+++ h---* r+++ y+++ -----END GEEK CODE BLOCK----- Re: Run a External EXE File hxxbin5-Jan-04 8:42 hxxbin 5-Jan-04 8:42  Thanks for the help Now, the Services run on my machine, I'm trying to make a Installer with the Deploy Template, but isn't work, the application installutil is installed with the .NET Distribution???, I don't wanna install de .NET Framework SDK into the server. Re: Run a External EXE File Heath Stewart5-Jan-04 9:37 Heath Stewart 5-Jan-04 9:37  Yes it is, but you have to add the Framework path to your PATH environment variable or execute installutil.exe using the fully-qualified path. The path for .NET 1.0 is %WINDIR%\Microsoft.NET\Framework\v1.0.3705 and for .NET 1.1 %WINDIR%\Microsoft.NET\Framework\v1.1.4322. Make sure your Installer class is attributed with the RunInstallerAttribute. For an example, see the ServiceInstaller class documentation (for the class itself).   -----BEGIN GEEK CODE BLOCK----- Version: 3.21 GCS/G/MU d- s: a- C++++ UL@ P++(+++) L+(--) E--- W+++ N++ o+ K? w++++ O- M(+) V? PS-- PE Y++ PGP++ t++@ 5 X+++ R+@ tv+ b(-)>b++ DI++++ D+ G e++>+++ h---* r+++ y+++ -----END GEEK CODE BLOCK-----

Last Visit: 31-Dec-99 18:00     Last Update: 19-Apr-24 10:31 Refresh ᐊ Prev1...14286142871428814289142901429114292142931429414295 Next ᐅ

General    News    Suggestion    Question    Bug    Answer    Joke    Praise    Rant    Admin   

Use Ctrl+Left/Right to switch messages, Ctrl+Up/Down to switch threads, Ctrl+Shift+Left/Right to switch pages.