|
Steps to upgrade.
Start with a fresh directory/folder. Do NOT attempt to work this in your existing application. Even if you want to be in there when you are done only move it there once it works.
Ideally you should start with the Visual Studio version that the library was built with. Why? Because you first need to verify that you can build it at all with the closest approximation to an ideal environment.
Myself I would do a 'clean' (the older VS) before moving on.
If it doesn't build then you will need to figure that out first.
Ideally there should be a way to test (unit tests) so if so run those.
If tests are missing then it would probably be a good idea to at least create a basic test framework that can exercise some of the functionality.
Now you take a snap shot - check the code into source control. This is your baseline - version 1.
------------------------------------------
Now start the new VS and attempt to load the solution. Given the dates I suspect it is going to modify the solution.
If you are lucky this solution will still build and tests will run. If yes then check it in, version 2. Otherwise you might as well move on the next part immediately.
------------------------------------------
Most of the work is here.
There are some project configuration values that probably need to be updated (different Net versions.) You can try compiling after that but expect it to fail.
You will need to update the libraries. Plural because there will probably be more than one.
Compile.
Then start looking at the errors. And fix them. Breaking changes mean exactly that in that you might need to modify the code so it works with a newer version.
This could require either no work or a substantial amount of work.
Once the errors are gone you should take a look at the warnings too. Sometimes those warnings can represent functionality that isn't going to work.
----------------------------
The above is an ideal scenario.
In a less than ideal scenario you would need to upgrade, completely, to an older version of VS first. So do all of the above. Then repeat with the newest version that you actually want.
|
|
|
|
|
Many thanks to everyone's input, I will try a "clean" build as recommended and hopefully post results back up here for future reference.
Pound to fit, paint to match
|
|
|
|
|
I wrote an app in Win Forms, and I'm using a circle in ListView, as a pleasant indicator. On my rigs, running Win 10 at home and 11 at the office, the ⬤ char works no problem. But on the customers computers running Win 7, I get the tall square symbol.
So I changed the Font in my Win Forms App to Segoe UI, which looks nice, but I still get the tall rectangle. I checked the customers computers to see what fonts are loaded, and Segoe UI is there.
Then I did research, and a few online posts talk about font searching by the OS, which dates back to Windows XP. If the Char ⬤ doesn't exists in the Font file, the OS will search for that char in other font files, such as webdings.ttf. Found a post about using the RegEdit /LocalMachine/Software/WindowsNt/Fonts and having to edit font mappings, which looked complicated.
ChatGpt says that I can MeasureText, to see if a char exists, and if not choose another char sysmbol.But the char always exists.
Dim font As New Font("Segoe UI", 9, FontStyle.Regular)
' The character you want to check (e.g., the copyright symbol ©)
Dim specialChar As Char = "⬤"
' Check if the font can display the character
Dim canDisplayChar As Boolean = TextRenderer.MeasureText(specialChar, font).Width > 0
If canDisplayChar Then
Return "⬤"
Else
Return "X"
End If
I'm just wondering if someone here has figured this out, and can share what they did. The customer really wants the ⬤.
On a side note or question, I can set a color for the circle in ListView on .Net Core 7, but can't set the color of the circle in .Net Framework 4.6.1.
If it ain't broke don't fix it
Discover my world at jkirkerx.com
|
|
|
|
|
What you "see" depends on the font of your "IDE"; what shows up at run time, is another matter (when you use "strings" for characters). Try "character codes".
https://stackoverflow.com/questions/3144053/how-to-represent-unicode-character-in-vb-net-string-literal
"Before entering on an understanding, I have meditated for a long time, and have foreseen what might happen. It is not genius which reveals to me suddenly, secretly, what I have to say or to do in a circumstance unexpected by other people; it is reflection, it is meditation." - Napoleon I
|
|
|
|
|
I had to think about that for a couple of minutes. So instead of blaming the OS, I should consider the code, and use a character code. I'll try that. Thanks!
If it ain't broke don't fix it
Discover my world at jkirkerx.com
|
|
|
|
|
That got complicated, and resulted in showing a "n"
Decided to use these chars in string form, and it works for now ❶❷ they are in Segoe UI
If it ain't broke don't fix it
Discover my world at jkirkerx.com
|
|
|
|
|
You said you wanted to use Segoe UI Symbol; which means that has to be the font specified in your "UI" when you use (hex) codes for "special" characters in that font.
The "symbol font" in fact contains numerous "black circles" of various sizes (or the same size). You can't just pick "any" black circle and expect it to show up in "any" font.
In my app, I mix all "4" Segoe fonts (MDL2, UI, Symbol, Emoji) at the same time and never have any issues: character code + font family.
"Before entering on an understanding, I have meditated for a long time, and have foreseen what might happen. It is not genius which reveals to me suddenly, secretly, what I have to say or to do in a circumstance unexpected by other people; it is reflection, it is meditation." - Napoleon I
|
|
|
|
|
I get it now!
I selected the wrong font file, and can use Segoe UI Symbols, which has the large circle, and alphanumeric chars as well. So I don't have to compromise now, and can finish as planned. Realize my UI goal or vision.
So this font style and font file solves my issue and is the correct fix. And I should not depend on Windows or the OS to do font searching and swapping for me, because it's unreliable.
Wow, I put so much effort into trying to solve this and it was very hard. Thank you Gary for putting me on the right track, and pushing me to get it right and not compromise for something sub standard.
If it ain't broke don't fix it
Discover my world at jkirkerx.com
|
|
|
|
|
You're welcome.
And the "black circles" aren't really "black"; that's the default "foreground" color; you can change it to any color you want. That applies that "all" characters.
If you want a different color for the background, it has to come from the object "behind" it. "Characters" have no background color you can set. Emoji is colored by default and you can't change that.
You can layer characters to "insert" a color into (say) a "hollow circle" with a "solid colored circle" behind it (so as not have to put another "background" behind). And you can rotate individual characters (e.g. pointing arrows)
"Before entering on an understanding, I have meditated for a long time, and have foreseen what might happen. It is not genius which reveals to me suddenly, secretly, what I have to say or to do in a circumstance unexpected by other people; it is reflection, it is meditation." - Napoleon I
|
|
|
|
|
I was pretty excited and thought I had it all figured out, only to be proven wrong again, where I got ".." which is 2 dots. target computer is a Win 7 32 bit OS, My "Extras" app is targeted at Framework 4.6.1. I got the code from Charmap; U+2824 Black Large Circle. On my rig it works great.
With my other Win Forms app called "Simple BOL" using .Net Core 7 I think, I can change the forecolor of a ListView cell or column, and make red, black and green circles on my rig running Win 11 64. But on these Win 7 32 bit OS machines with the app in question called "Extras", no luck either. In fact on my machine with Extras, the forecolor for a target cell won't change colors either.
So another swing and a miss for strike 3 now, batter out. Well I still have plenty of innings left in the game, so I'll try again tomorrow.
If it ain't broke don't fix it
Discover my world at jkirkerx.com
|
|
|
|
|
U+2824 is NOT a "circle"; it is a "Braille Pattern Dots-36" in the "Segoe UI Symbol" font (i.e. 2 "dots"). It is exactly what it is.
"Before entering on an understanding, I have meditated for a long time, and have foreseen what might happen. It is not genius which reveals to me suddenly, secretly, what I have to say or to do in a circumstance unexpected by other people; it is reflection, it is meditation." - Napoleon I
|
|
|
|
|
That sounds encouraging, but that's the code Character Map presents to me on both my computers. Hmm...
I have U+28C0 for the braille code of 2 dots Braille Pattern Dots 78
Mind if I ask what code you have for the Large Black Circle?
If it ain't broke don't fix it
Discover my world at jkirkerx.com
|
|
|
|
|
You talk codes without font names; which is meaningless.
It should be a simple matter for you to compare the character maps of "both operating systems" and draw your own conclusions.
"Before entering on an understanding, I have meditated for a long time, and have foreseen what might happen. It is not genius which reveals to me suddenly, secretly, what I have to say or to do in a circumstance unexpected by other people; it is reflection, it is meditation." - Napoleon I
|
|
|
|
|
U+2B24 - I thought the B was an 8 in Segoe UI Symbol.
If it ain't broke don't fix it
Discover my world at jkirkerx.com
|
|
|
|
|
Finally got it working today. Thanks for the help, I learned a lot on this and your input made things clearer. This ended up being a deep lesson on Fonts and Chars for me, and will make coding more fun in the future, using some emojis to brighten things up a bit. Thanks Gerry!
I just need to get some glasses pretty soon.
If it ain't broke don't fix it
Discover my world at jkirkerx.com
|
|
|
|
|
Good morning,
I'm trying to capture an image from a RTSP stream using ffmpeg.
I'm struggling, it is as if ffmpeg isnt working. A snip from my code is below:
using System.Runtime.InteropServices;
using FFmpeg.AutoGen;
using SixLabors.ImageSharp.Formats.Png;
using SixLabors.ImageSharp.Formats;
Class Program
{
unsafe static void Main(string[] args)
{
string inputUrl = "rtsp://wowzaec2demo.streamlock.net/vod/mp4:BigBuckBunny_115k.mp4";
ffmpeg.avformat_open_input(&pFormatContext, inputUrl, null, null);
The error that I'm receiving which is related to the last line of code is:
System.NotSupportedException
HResult=0x80131515
Message=Specified method is not supported.
Source=FFmpeg.AutoGen
StackTrace:
at FFmpeg.AutoGen.DynamicallyLoadedBindings.<>c.<Initialize>b__2_1284(AVFormatContext** <p0>, String <p1>, AVInputFormat* <p2>, AVDictionary** <p3>)
at FFmpeg.AutoGen.ffmpeg.avformat_open_input(AVFormatContext** ps, String url, AVInputFormat* fmt, AVDictionary** options)
at Program.Main(String[] args)
Any help would be appreciated,
Freddie
|
|
|
|
|
You'll probably have better luck reporting this as an issue in the GitHub project - assuming it hasn't already been reported:
Issues · Ruslan-B/FFmpeg.AutoGen · GitHub[^]
"These people looked deep within my soul and assigned me a number based on the order in which I joined."
- Homer
|
|
|
|
|
The documentation at FFmpeg: Demuxing[^] implies that it expcts an actual filename as input. So try reading the stream into a local file, and see if it can process that.
|
|
|
|
|
|
I have about 6 user controls, each with its own GUI and code to load data from a MySQL database.
Are there any tutorials or examples on how to use multithreading to load all 6 user controls on a Form when the Form is shown?
Thanks in advance.
|
|
|
|
|
Controls cannot be created and used on anything other than the UI (startup) thread. Your controls CAN, however, used Tasks or Threads to load data from the database, but populating the control data with the data returned from the database must be done on the UI thread.
There are plenty of articles on the web about using tasks to get data. There is nothing specific to user controls that changes how that's done.
|
|
|
|
|
What Dave said and use ObservableCollections to have the UC's update "live".
"Before entering on an understanding, I have meditated for a long time, and have foreseen what might happen. It is not genius which reveals to me suddenly, secretly, what I have to say or to do in a circumstance unexpected by other people; it is reflection, it is meditation." - Napoleon I
|
|
|
|
|
I am using visual basic to try and get the webview2 current url but all I get is the first page that I opened with the webview2. I used
dim URL as string = webView21.Source.ToString() but not returning current page url. I have work on this for 2 days now and no luck. I sure hope some body can answer this or my whole project is toast.
|
|
|
|
|
You have to handle the NavigationCompleted event, then you can get the "current" uri from either webView21.Source or webView21.CoreWebView2.Source.
|
|
|
|
|
Thanks so much Dave. I knew there had to be away, just couldn't find it. Vb.net is just a hobby for me but if I can help someone else I will pay this forward.
|
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
