|
I've had only 1 "set" of SSDs from Crucial screw me over.
I can one-up that. I've only lost 1 ssd (mushkin), and I maintain it was not the ssd's fault. Stay with me. Back around 2017, after about 3 years of not changing any significant hardware, one day I get an IO error when trying to boot. Booted a live dvd and confirmed the disk was visible but simply refused to mount. So I shut it down and switch off the psu (normally I leave them plugged in but hardware switch off at the psu so it can stay grounded). I go to remove the ssd and I notice the hdd next to it was vibrating like it's still on. So I figure the rocker is dead/shorted and unplug the pc and take my chances with the static. It's still vibrating. Thinking I'm hearing things, I take a multimeter to the nearest open molex and find the 5v and 12v pins both read as 5v. So I start unplugging everything. Turns out it was my powered usb hub. Whenever the machine was off, the little 5V 2A wall wart was holding the whole system 12v line at 5v, apparently too low for any fans or cpu or any indicators of something being powered other than the half-speed hdd spinning. So the ssd was routinely subjected to a 12v and 5v rail pair that had no difference in voltage. Now I'm suprised the ssd was the only thing to break after 3 years. I still use the hub by the way, just with the usb cable between it and the pc modified to no longer connect the red wire.
|
|
|
|
|
Wow... That wins! Thanks for sharing...
FWIW, I am always concerned with device power issues.
And I cannot stand the new "feature" whereby my laptop powers the USB ports when it is off!
It just doesn't seem "right"...
|
|
|
|
|
100% with you there. My laptop has the ability to switch that off in bios. Too bad bios resets itself every time it is turned off and not connected to its power cable (replacing the cr2032 did not fix that). As for usb charging my phone, well that's half the reason I had a powered usb hub in the first place  . Though now I mostly use the usb port on my ups.
|
|
|
|
|
It doesn't seem right because it's wrong. First rule of UI- never lie to the user. Ever.
Charlie Gilley
“They who can give up essential liberty to obtain a little temporary safety deserve neither liberty nor safety.” BF, 1759
Has never been more appropriate.
|
|
|
|
|
Thanks for adding the explanation I was thinking of writing. 
Software Zen: delete this;
|
|
|
|
|
Thanx for this clarity on SSD. My SSD quotes
"Global wear-leveling evens program/erase counts across data blocks to extend lifespan"
which is what I think you were referring to. Never saw this spec until you brought it up.
"A little time, a little trouble, your better day"
Badfinger
|
|
|
|
|
I had one of my early USB memory sticks (not an SSD disk intended to replace a magnetic disk) more or less permanently sitting in the USB socket. This was in the days of Win XP, which wasn't very much aware of the special nature of Flash. I noticed that the LED on the stick lit up regularly (and quite frequently), but thought nothing of it until the stick started failing. I did a full formatting, ending up with a lot of bad pages, and used it for some more time, but soon more pages went bad.
That is when I first heard about wear leveling, and of the new Win 7 being "Flash aware", doing more extensive buffering to reduce the number of writes of OS data to the Flash device.
So: Once upon a time, Flash wear-out was a problem - probably more so on USB sticks. It might have been a problem even on SATA SSDs in their very earliest days, before wear leveling became standard. (That is a number of years ago!)
Note: Wear leveling is only applied to writing of pages that are being written/modified. Unmodified pages are not moved around to reduce wear. So it is no good idea to fill up your SSD to 99.9% of read-only files, and keep up heavy write/modify traffic on the last 0.1%. Keeping a fair share of the disc unused will spread the wear over more physical blocks, with less wear on a each of them. (This is of course of minimal concern if you do not make lots of writes to the remaining 0.1%!)
|
|
|
|
|
The fact that you can edit in other tools tells me the problem is with the VS project and not your SSD. The error you received also occurs on spinning rust drives, so it's not a drive error.
|
|
|
|
|
Sorry, I guess I wasn't clear.
I opened another project with the same vs (not another tool) and it worked.
|
|
|
|
|
In this case I would suspect the SLN or PROJ file (or both) is corrupt.
|
|
|
|
|
I've had an unprintable character in my source code that would foul up VS. They'd be at the end of a line and I would only notice them if I hit End. No idea how it got there but removing it fixed things.
"Before entering on an understanding, I have meditated for a long time, and have foreseen what might happen. It is not genius which reveals to me suddenly, secretly, what I have to say or to do in a circumstance unexpected by other people; it is reflection, it is meditation." - Napoleon I
|
|
|
|
|
I have my Windows installation and all my apps on an SSD. Everything else (so all my data, including my VS projects, my email folders, etc) are on spinning rust. This gives me excellent performance without hammering the SSD.
Paul Sanders.
If I had more time, I would have written a shorter letter - Blaise Pascal.
Some of my best work is in the undo buffer.
|
|
|
|
|
That's how I have my DAW in the rumpus room configured because the latest written tune of the month is also a never finished source of obsession. 
|
|
|
|
|
What Daniel said. I have SSD's in various laptops and am constantly doing code development and database operations. Never had a problem, and some of these SSD's are 5+ years old.
|
|
|
|
|
Hmm, could be a file is being locked?
Did you try rebooting the PC
|
|
|
|
|
Wordle 421 4/6
⬛⬛🟩⬛⬛
⬛⬛🟩⬛⬛
⬛⬛🟩⬛🟨
🟩🟩🟩🟩🟩
|
|
|
|
|
Wordle 421 5/6
⬜🟨🟨⬜⬜
⬜⬜⬜⬜⬜
⬜🟨⬜🟨⬜
⬜🟩🟩🟨⬜
🟩🟩🟩🟩🟩
Elephanting elephant! I must have spent an hour finding a single matching word after 4. Gotta recalibrate my radar it seems.
At least my Worldle OTD was fine:
#Worldle #205 1/6 (100%)
🟩🟩🟩🟩🟩🎉
Worldle[^]
"If we don't change direction, we'll end up where we're going"
|
|
|
|
|
Wordle 421 3/6
🟨⬜⬜⬜⬜
⬜⬜🟩⬜⬜
🟩🟩🟩🟩🟩
That's going to throw a few people, I think.
"I have no idea what I did, but I'm taking full credit for it." - ThisOldTony
"Common sense is so rare these days, it should be classified as a super power" - Random T-shirt
AntiTwitter: @DalekDave is now a follower!
|
|
|
|
|
Wordle 421 4/6
⬜⬜🟩⬜⬜
⬜⬜🟩⬜⬜
⬜⬜🟩⬜⬜
🟩🟩🟩🟩🟩
Life should not be a journey to the grave with the intention of arriving safely in a pretty and well-preserved body, but rather to skid in broadside in a cloud of smoke, thoroughly used up, totally worn out, and loudly proclaiming “Wow! What a Ride!" - Hunter S Thompson - RIP
|
|
|
|
|
you surely are thinking lateral...
3rd word as slightly off track... 
|
|
|
|
|
Not really - with that one known letter in the middle and all the "excluded letters", I'm down to triple vowel or "exotic consonant" words. And there aren't that many of them (that I can think of, anyway!)
"I have no idea what I did, but I'm taking full credit for it." - ThisOldTony
"Common sense is so rare these days, it should be classified as a super power" - Random T-shirt
AntiTwitter: @DalekDave is now a follower!
|
|
|
|
|
Wordle 421 4/6
🟨⬜🟨⬜⬜
⬜⬜⬜⬜🟨
⬜⬜⬜🟩⬜
🟩🟩🟩🟩🟩
Software rusts. Simon Stephenson, ca 1994. So does this signature. me, 2012
|
|
|
|
|
Wordle 421 6/6
⬜⬜🟨⬜⬜
🟨⬜🟨⬜⬜
⬜🟩🟨⬜🟨
⬜⬜⬜⬜⬜
⬜🟩🟩⬜⬜
🟩🟩🟩🟩🟩
Was about to throw in the towel when I suddenly saw the solution.
|
|
|
|
|
Wordle 421 4/6
⬛⬛🟩⬛⬛
⬛⬛🟩⬛🟨
⬛⬛🟩🟩⬛
🟩🟩🟩🟩🟩
|
|
|
|
|
Wordle 421 3/6
⬛⬛🟩⬛⬛
⬛⬛🟩🟨⬛
🟩🟩🟩🟩🟩
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
