|
Wow, you really need to dump CP.
A couple of years ago Sean and Chris totally abused me and blamed me for things I did not do, and was not the first time. So, I had finally had enough. I turned on an adblocker. I liked coming here to help people in QA but there was no way they were going to make money off of me anymore.
Sean finally kicked me off the site completely so this is just a temp email and if you reply, it may never get to me. But I saw Balboos post in the Lounge which is clearly a flagrant political post and you rightly called him out.
But YOUR POST IS LOCKED, NOT HIS!!!! Are you freakin kidding me?   
It's Chris' site so he can do whatever the heck he wants. I just wish he'd be honest about it and post something at the top that says anti-conservative viewpoints are welcome but conservative ones will get you banned. It's the dishonesty that Chris and Sean show that is disgusting, but let's face it, on par for leftists.
Anyway, I still come to the site from time to time just to hit their page and not generate any ads.  But even though I was part of this site for so many years, it's actually been quite refreshing to leave it behind. I have never fit in here. It's too much of a click.
Just my 2 cents.
See ya.
|
|
|
|
|
|
You were promoted to Administrator but weren't told.
It was only in wine that he laid down no limit for himself, but he did not allow himself to be confused by it.
― Confucian Analects: Rules of Confucius about his food
|
|
|
|
|
I hate it when my administrator (me) does stuff without telling me (I'm also me)!
|
|
|
|
|
|
|
Sander Rossel wrote: I'm completely puzzled.
What is all this stuff and what more do I have that I know nothing about?
It is what they call 'the tip of the iceberg'...
All the cloud with all its departments is so tangled that hard to understand... We actually pay for experts to do simple things like assign roles and licenses - the right ones to the right person...
"The only place where Success comes before Work is in the dictionary." Vidal Sassoon, 1928 - 2012
|
|
|
|
|
Kornfeld Eliyahu Peter wrote: We actually pay for experts to do simple things
I've worked for a company who did that too.
Those experts are disgustingly expensive and their worth can be questioned.
We made a calculation and estimated our Azure environment to be around €300 per environment per month, so for DTAP that's €1200.
We got a bill of €2000 for production alone...
The fun part was that production was our least busy environment as it was a new product that was being actively developed and tested and hardly used in production yet.
When we asked our "cloud partner" for the invoice they had amazing stories of how that would be difficult and it wasn't that simple.
Anyway, I have just myself, so I'm not going to hire an expert to assign me one license 
|
|
|
|
|
@DavidCunningham and myself discuss this a lot. It's an absolute debacle.
We feel your pain.
cheers
Chris Maunder
|
|
|
|
|
|
More than a laugh it gave me a whatever I get when I enjoy good dance music 
|
|
|
|
|
The T0 sensor is the thermistor at the hotend of my 3D printer. Usually that means that the thermistor is shorted out (0 resistance) or one of the wires has broken (infinite resistance). The problem is that the error only occurs now and then in the middle of a print. After a reset everything is ok again, but the print is ruined.
Most probably it's just a broken contact or wire that sometimes fails as the printing head moves around. That's a real pain to track down and I don't want to randomly replace parts and cables until it's ok again. Any ideas?
I have lived with several Zen masters - all of them were cats.
His last invention was an evil Lasagna. It didn't kill anyone, and it actually tasted pretty good.
|
|
|
|
|
|
Will a sledgehammer do?
I have lived with several Zen masters - all of them were cats.
His last invention was an evil Lasagna. It didn't kill anyone, and it actually tasted pretty good.
|
|
|
|
|
I suggest waving a dead chicken over it and chanting.
Real programmers use butterflies
|
|
|
|
|
Something like that is only the last resort. In such a case I usually wear some feathers on the head and dance around the printer with two rattles. It can take a few hours of dancing and chanting and my poor neighbors might not get much sleep.
I have lived with several Zen masters - all of them were cats.
His last invention was an evil Lasagna. It didn't kill anyone, and it actually tasted pretty good.
modified 26-Oct-20 19:14pm.
|
|
|
|
|
Could you print the wonky part?
I’ve given up trying to be calm. However, I am open to feeling slightly less agitated.
|
|
|
|
|
I would not waste much time with a 3D printer if I had Jean Luc's replicator. 
I have lived with several Zen masters - all of them were cats.
His last invention was an evil Lasagna. It didn't kill anyone, and it actually tasted pretty good.
|
|
|
|
|
Easiest to check is the wires - put a multimeter on "bleep" and check the continuity of each wire while waggling the about through the "normal" range of movement. If it stops bleeping, it's a wire. If it doesn't, it's more likely to be the thermistor, and that may only fail when it gets hot, which is a PITA to test ...
Do you have a spare hotend you can swap over? If it's not the wires and the new hotend shows the same problems, it's on the motherboard that monitors the thermistor.
"I have no idea what I did, but I'm taking full credit for it." - ThisOldTony
"Common sense is so rare these days, it should be classified as a super power" - Random T-shirt
AntiTwitter: @DalekDave is now a follower!
|
|
|
|
|
Not a PITA: Put soldering iron (big) on head and monitor head temperature. My printer display updates every 5 secs or so.
Mircea
|
|
|
|
|
OriginalGriff wrote: Easiest to check is the wires - put a multimeter on "bleep" and check the continuity of each wire while waggling the about through the "normal" range of movement.
The problem may be thermal as well. A cracked trace on a circuit board or a sloppy solder connection can behave like that at different temperatures while looking just fine optically and seem to ok when you measure at room temperature.
OriginalGriff wrote: Do you have a spare hotend you can swap over? If it's not the wires and the new hotend shows the same problems, it's on the motherboard that monitors the thermistor.
Unfortunately not. I guess it's time to take the cover off the hotend and see if I can find anything obvious.
I have lived with several Zen masters - all of them were cats.
His last invention was an evil Lasagna. It didn't kill anyone, and it actually tasted pretty good.
|
|
|
|
|
First I would find out if it really is a thermistor, or if it might be a thermocouple or an rtd.
If it's an rtd or a thermistor you just need to put a voltmeter (or rather a logger) in parallell at the main board, and check how the value differs when it fails.
In theory that's all you need to do also with a thermocouple, but they are notoriously sensitive to such interference
Wrong is evil and must be defeated. - Jeff Ello
Never stop dreaming - Freddie Kruger
|
|
|
|
|
Mine would be Accelerated C++ by Andrew Koenig and Barbara Moo.
It's mercifully short, and it teaches C++ the Right Way(TM) - the way Bjarne intended it to be used, and how it works best.
It's suitable for beginners to C++ and in fact I recommend it for teaching C++, and it's the only one I'll recommend for that.
Real programmers use butterflies
|
|
|
|
|
A well-known compiler text has a dragon on the front. This one should have had a cow, branded with Euler's diagram of the 5 bridges of Königsberg.
|
|
|
|
|
So, the problem is that it's missing two bridges?
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
