Re: Need to add a new visual studio solution to an existing visual studio solution Git repository - C# Discussion Boards

Re: The provider is not compatible with the version of Oracle client

Richard MacCutchan10-Aug-20 3:26

Richard MacCutchan

10-Aug-20 3:26

It looks like you are trying to mix 32-bit and 64-bit, which will not work.

Re: The provider is not compatible with the version of Oracle client

Eddy Vluggen10-Aug-20 12:04

Eddy Vluggen

10-Aug-20 12:04

So, you found an English site and decided to post in French?

Je voulais un chien de bbq. Avec une croissont.

You installed the wrong drivers. The error hints at it. Make sure the croissant warm Thumbs Up | :thumbsup:

Bastard Programmer from Hell Suspicious | :suss:

If you can't read my code, try converting it here[^]
"If you just follow the bacon Eddy, wherever it leads you, then you won't have to think about politics." -- Some Bell.

Re: The provider is not compatible with the version of Oracle client

OriginalGriff10-Aug-20 19:36

OriginalGriff

10-Aug-20 19:36

Mon aéroglisseur est plein d'anguilles.

"I have no idea what I did, but I'm taking full credit for it." - ThisOldTony
"Common sense is so rare these days, it should be classified as a super power" - Random T-shirt
AntiTwitter: @DalekDave is now a follower!

Re: The provider is not compatible with the version of Oracle client

Richard Deeming10-Aug-20 21:47

Richard Deeming

10-Aug-20 21:47

Wenn ist das Nunstück git und Slotermeyer? Ja! Beiherhund das Oder die Flipperwaldt gersput!

"These people looked deep within my soul and assigned me a number based on the order in which I joined."
- Homer

Re: The provider is not compatible with the version of Oracle client

OriginalGriff10-Aug-20 21:54

OriginalGriff

10-Aug-20 21:54

Romanes eunt domus?

Re: The provider is not compatible with the version of Oracle client

Jörgen Andersson12-Aug-20 9:17

Jörgen Andersson

12-Aug-20 9:17

Now write the correct phrase, Romani ite domum, 100 times,

Wrong is evil and must be defeated. - Jeff Ello
Never stop dreaming - Freddie Kruger

Need to add a new visual studio solution to an existing visual studio solution Git repository

syedripon6-Aug-20 6:43

syedripon

6-Aug-20 6:43

Good day.I have a VS2017 C# solution (A) with 3 projects under this solution and the whole solution is in Git repository.

Now, I just created a small Windows form solution C# (B) with single project. How can I add this new solution(B) to the existing solution(A) so that at the end I can push the exisitng git repository(A) along with the new solution as part of it. I tried this way: Added solution folder of B to the solution folder of A. Now what? I can open up Team explorer in A or B. How can I achieve this in VS or in Git? Please advice an easy way.Thanks

Re: Need to add a new visual studio solution to an existing visual studio solution Git repository

Dave Kreskowiak6-Aug-20 7:05

Dave Kreskowiak

6-Aug-20 7:05

Solutions do not contain other solutions.

A solution is a collection of Projects. So, you can open the Solution you're trying to add to and just add an existing project to it. Navigate to the .proj file in the project folder you want to add to the solution.

Asking questions is a skill
CodeProject Forum Guidelines
Google: C# How to debug code
Seriously, go read these articles.

Dave Kreskowiak

Re: Need to add a new visual studio solution to an existing visual studio solution Git repository

OriginalGriff6-Aug-20 7:58

OriginalGriff

6-Aug-20 7:58

David is right - it's add the project to the solution, or create a new repository for your existing "spare" solution.

I use a separate repository for each solution, which is the most sensible way - adding unrelated projects to a solution doesn't keep them separated enough, and "bloats" solutions (which can slow things down considerably if you aren't careful).

I need to see if a digit from a number is odd or even in c#

keeponfalling125-Aug-20 4:24

keeponfalling12

5-Aug-20 4:24

Hello all, 

If you can please help me, I'm new to see sharp programming.

I need to display odd/even for each digit from a number like this:

4444
even
even
even
even

So, I extract each digit from the right - to the left (it was easy for me like this) and I have this code:

 <pre>

static void Main(string[] args)
{

string inputData = Console.ReadLine(); // the digit
int number = Convert.ToInt32(inputData);

int aDigit = number % 10000 / 1000;
int bDigit = (number % 1000) / 100;
int cDigit = (number % 10);
int dDigit = (number % 100) / 10;
}

<pre lang="c#">

To get odd/even from each digit I use the concatenate method, and combine each digit with the string name odd/even and in console I get eveneveneveneven (for 4444). Is there a way to get like a block or list with concatenate method.

Or is there with if/else function and display the odd/even result with if (aDigit %2 ==0). and return in console writeline even/odd like a list.

Thank you for your time.

Re: I need to see if a digit from a number is odd or even in c#

OriginalGriff5-Aug-20 4:58

OriginalGriff

5-Aug-20 4:58

Try this:

/// <summary>
/// Returns a string giving the odd and even status for each digit of a value
/// </summary>
/// <param name="val">Value to check</param>
/// <returns>line by line digit and status</returns>
private static string GetOddAndEvens(int val)
    {
    StringBuilder sb = new StringBuilder(120);
    Stack<int> digits = new Stack<int>();
    val = Math.Abs(val);
    while (val > 0)
        {
        int digit = val % 10;
        digits.Push(digit);
        val /= 10;
        }
    while (digits.Count > 0)
        {
        int digit = digits.Pop();
        string evenOdd = digit % 2 == 0 ? "even" : "odd";
        sb.AppendLine($"{digit} - {evenOdd}");
        }
    return sb.ToString();
    }

Re: I need to see if a digit from a number is odd or even in c#

keeponfalling125-Aug-20 5:23

keeponfalling12

5-Aug-20 5:23

I try but is not working in visual studio, I'm getting here:

StringBuilder sb = new StringBuilder(120);
    Stack<int> digits = new Stack<int>();

a code error.
Do I have to set a new class or a new namespace or something else?
Thank you for your time, I really appreciate that you help me.

Re: I need to see if a digit from a number is odd or even in c#

OriginalGriff5-Aug-20 5:45

OriginalGriff

5-Aug-20 5:45

Put your mouse over the type with the red line under it.
A small dropdown will appear below and to the left.
Open the dropdown, and it will offer a range of solutions for fixing the problem: the top one will probably be "using System.Text" for StringBuilder and "using System.Collections.Generic" for the Stack.
Click on that, and it'll add the required using line for you.

Re: I need to see if a digit from a number is odd or even in c#

Gerry Schmitz5-Aug-20 5:35

Gerry Schmitz

5-Aug-20 5:35

string s = "1234";

foreach ( char ch in s ) {
   Console.WriteLine( $"{ch}: {( ch % 2 == 0 ? "even" : "odd" )}" );
}

Console.ReadKey();

It was only in wine that he laid down no limit for himself, but he did not allow himself to be confused by it.
― Confucian Analects: Rules of Confucius about his food

Re: I need to see if a digit from a number is odd or even in c#

keeponfalling125-Aug-20 10:19

keeponfalling12

5-Aug-20 10:19

Thank you! ...I was looking for a complicate solution for a simple problem Smile | :)

Re: I need to see if a digit from a number is odd or even in c#

Gerry Schmitz5-Aug-20 14:06

Gerry Schmitz

5-Aug-20 14:06

You're welcome! The Char class has a lot of useful methods: .IsDigit(), .IsLetter(), etc.

It was only in wine that he laid down no limit for himself, but he did not allow himself to be confused by it.
― Confucian Analects: Rules of Confucius about his food

How to get ios device capacity using MDM profiling

Veridic Anil4-Aug-20 22:25

Veridic Anil

4-Aug-20 22:25

Based on this document from apple : https://developer.apple.com/business/documentation/MDM-Protocol-Reference.pdf

Quote:
I am trying to fetch mobile identifier by running provisioning profile on the device.
Here, I am able to get these identifiers: -

UDID
IMEI
ICCID
VERSION
PRODUCT

But this Identifier i.e. DeviceCapacity is not getting fetch.

Please find below is my code:

XML

<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
 <dict>
   <key>PayloadContent</key>
   <dict>
     <key>URL</key>
     <string>https://xyz.com/home/checkin/?udi={0}</string>
     <key>DeviceAttributes</key>
     <array>
       <string>UDID</string>
       <string>IMEI</string>
       <string>ICCID</string>
       <string>VERSION</string>
       <string>PRODUCT</string>
       <string>SERIAL</string>
       <string>MEID</string>
       <string>DEVICECAPACITY</string>

     </array>
   </dict>
   <key>PayloadOrganization</key>
   <string>cellderetail-pro-new.cellde.com</string>
   <key>PayloadDisplayName</key>
   <string>Profile Service</string>
   <key>PayloadVersion</key>
   <integer>1</integer>
   <key>PayloadUUID</key>
   <string>9CF421B3-9853-4454-BC8A-982CBD3C907C</string>
   <key>PayloadIdentifier</key>
   <string>com.cellderetailpronewprovisioning</string>
   <key>PayloadDescription</key>
   <string>This temporary profile will be used to extract your current device's identifiers.</string>
   <key>PayloadType</key>
   <string>Profile Service</string>
 </dict>
</plist>

Below is is the code for installing provisioning profile on ios device

var contentDisposition = new System.Net.Mime.ContentDisposition
                {
                    //FileName = "device-info.mobileconfig",
                    FileName = "device-information.mobileconfig",
                    Inline = false
                };
                var path = Configuration.MobileConfigPath;
                logger.LogMessage("MobileConfigPath" + path, FileLogger.MessageType.Info);
                string mobileConfigPlist = System.IO.File.ReadAllText(path);
                if (isHeadless)
                    udi = string.Format("{0}-hls-{1}-{2}-{3}-{4}-{5}-{6}", udi, storeId, StoreType, EnterpriseID,Session["TechName"],Session["Capacity"],Session["Model"]);
                var plistWithUdiUrl = mobileConfigPlist.Replace("{0}", udi);
                var bytes = getSignedContent(plistWithUdiUrl);
                logger.LogMessage("Signed Content Bytes", FileLogger.MessageType.Info);
                Response.AppendHeader("Content-Disposition", contentDisposition.ToString());
                Response.AppendHeader("Cache-Control", "public, no-store, max-age=0");
                return File(bytes, "application/x-apple-aspen-config");

As kind of help / suggestion are welcomed

Re: How to get ios device capacity using MDM profiling

Gerry Schmitz5-Aug-20 5:58

Gerry Schmitz

5-Aug-20 5:58

The fields you're querying require different access rights, including "Device Information" access rights.

It was only in wine that he laid down no limit for himself, but he did not allow himself to be confused by it.
― Confucian Analects: Rules of Confucius about his food

DataBase in User Control

Ismael_19994-Aug-20 4:15

Ismael_1999

4-Aug-20 4:15

Hi, friends. I want to create e User Control that contains two components: a textbox and a combobox. Both must be connected to a database (SqlServer, for instance). I know how to connect the combobox, also inside the UC, but in an instance of the UC I don’t. What I want is to add this new component to a form application and to make the connection, but different tables at a time. Can anybody help me?
Thanks.

Re: DataBase in User Control

OriginalGriff4-Aug-20 4:32

OriginalGriff

4-Aug-20 4:32

You'll need to either provide a Constructor or a Property that allows you to pass the table name into the UserControl when it is created, and provide methods to connect and disconnect the instance - almost certainly, a property is a better idea as you can't call a parameterized constructor from the VS designer (even creating a parameterized constructor will break the designer!)

Re: DataBase in User Control

Gerry Schmitz4-Aug-20 6:12

Gerry Schmitz

4-Aug-20 6:12

You can have parameterized constructors if you also have a default constructor for the designer. I use parameterized constructors when I add UC's on the fly, and sometimes add a private default constructor so it can only be used on the fly.

It was only in wine that he laid down no limit for himself, but he did not allow himself to be confused by it.
― Confucian Analects: Rules of Confucius about his food

Re: DataBase in User Control

OriginalGriff4-Aug-20 6:26

OriginalGriff

4-Aug-20 6:26

They must have fixed a bug - the designer used to puke it's guts up if you dropped a UC on a form and it had an overloaded constructor. Been a while since I tried as a reason! Laugh | :laugh:

How can I get handle (IntPtr) to a "sub"-form in another application?

arnold_w31-Jul-20 2:38

arnold_w

31-Jul-20 2:38

I would like to show a WinForms MessageBox centered on top of another application's (TortoiseGit) "sub"-form, i.e. a form (the TortoiseGit checkout form) on top of the main form (the TortoiseGit log window). I am able to successfully find the process (TortoiseGitProc) and from there I can successfully get a MainWindowHandle to the main form, but how do get from there to the "sub"-form (the TortoiseGit checkout form)?

Re: How can I get handle (IntPtr) to a "sub"-form in another application?

Eddy Vluggen31-Jul-20 2:53

Eddy Vluggen

31-Jul-20 2:53

EnumChildWindows function (winuser.h) - Win32 apps | Microsoft Docs[^], or enumwindows.

Example here; pinvoke.net: enumchildwindows (user32)[^]

Bastard Programmer from Hell Suspicious | :suss:

If you can't read my code, try converting it here[^]
"If you just follow the bacon Eddy, wherever it leads you, then you won't have to think about politics." -- Some Bell.

Re: How can I get handle (IntPtr) to a "sub"-form in another application?

arnold_w31-Jul-20 4:03

arnold_w

31-Jul-20 4:03

When I use the code from PINVOKE: Getting all child handles of window · Software adventures and thoughts[^] to get all the children, I get 30 pointers. When I then log the Window texts using the following

List<IntPtr> allChildWindows = new WindowHandleInfo(parentMainWindowHandle).GetAllChildHandles();
for (int i = 0; i < allChildWindows.Count; i++)
{
    StringBuilder sb2 = new StringBuilder(1024);
    GetClassName(allChildWindows[i], sb2, sb2.Capacity);
    sb2 = new StringBuilder(1024);
    GetWindowText(allChildWindows[i], sb2, sb2.Capacity);
    Debug.WriteLine(sb2.ToString());
}

then I get mostly empty strings, but I do get some strings that appears to come from the main form's (not the "sub"-form's) components (buttons, labels, etc), e.g. "<all branches="">", "Help", "Refresh", "Walk Be&haviour", "&View", "OK", etc. What am I doing wrong, why do I get pointers to the main form's components and not to the "sub"-form?

Use Ctrl+Left/Right to switch messages, Ctrl+Up/Down to switch threads, Ctrl+Shift+Left/Right to switch pages.