|
Wow you weren't kidding there is terrible stringing. Retraction?
I'm not sure how many cookies it makes to be happy, but so far it's not 27.
JaxCoder.com
|
|
|
|
|
Retraction did not change anything, not even with a Z step of 2 mm. The low printing temperature also did not help. I'm now at 180 degrees, 20 degrees below the temperature for this filament and that made everything even more messy. I will go back to a healty 210 degrees and check the settings of the cooling fans.
I have lived with several Zen masters - all of them were cats.
His last invention was an evil Lasagna. It didn't kill anyone, and it actually tasted pretty good.
|
|
|
|
|
Could be the filament as you suggested. I've had filaments that had more stringing than others, but never that bad.
I'm not sure how many cookies it makes to be happy, but so far it's not 27.
JaxCoder.com
|
|
|
|
|
Maybe not. I have tried to update Cura to the latest version. That did not work because they removed the option to manually select the printer's port and autodetection for some reason does not work. However, they now had a settings profile for my printer. So I just copied these settings into my old version of Cura and now it's printing again. No stringing at all so far, but the interesting part is still coming up. And it has become much faster. The last print took 16 hours at 0.15 mm layer height, nou it will be done in 12 hours at 0.1 mm layer height. In the morning I will be smarter.
I have lived with several Zen masters - all of them were cats.
His last invention was an evil Lasagna. It didn't kill anyone, and it actually tasted pretty good.
|
|
|
|
|
You mean PIGS in space?
In Word you can only store 2 bytes. That is why I use Writer.
|
|
|
|
|
Now that you say it... 
The old TV series was made in England with many British actors. And the US actors were heavily sedated for some reason. Have you ever seen it?
I have lived with several Zen masters - all of them were cats.
His last invention was an evil Lasagna. It didn't kill anyone, and it actually tasted pretty good.
|
|
|
|
|
That's terrible! When I think of "stringing", I mean really fine fibres: And printing in PETG[^] which aren't that bad to get rid of - a sharp blade and gentle sanding does the job.
That's PETG though, not PLA - I never got any stringing at all with PLA - running at 215/60, 80 mm/s with retraction 10mm at 60mm/s and a 20% fan speed.
All running on a Anycubic i3 Mega S
"I have no idea what I did, but I'm taking full credit for it." - ThisOldTony
"Common sense is so rare these days, it should be classified as a super power" - Random T-shirt
AntiTwitter: @DalekDave is now a follower!
|
|
|
|
|
OriginalGriff wrote: That's terrible! When I think of "stringing", I mean really fine fibres:
Lowering the printing temperature did not help. When I raise the temperature again, the fibers will not get less, but much finer.
OriginalGriff wrote: Anycubic i3 Mega S
Exactly what I have here. Perhaps I should try your settings. What version of Cura do you use?
I have lived with several Zen masters - all of them were cats.
His last invention was an evil Lasagna. It didn't kill anyone, and it actually tasted pretty good.
|
|
|
|
|
4.6.1 - it nags at you until you upgrade just to be able to see the whole object ... 
And I generate the STL from Fusion 360.
Those setting were for YoYi Translucent Blue PETG (Amazon[^]) - in theory they manufacture themselves using European stock so it should be pretty consistent, but they are Chinese, so ...
"I have no idea what I did, but I'm taking full credit for it." - ThisOldTony
"Common sense is so rare these days, it should be classified as a super power" - Random T-shirt
AntiTwitter: @DalekDave is now a follower!
|
|
|
|
|
I got the printer working again, after trying to upgrade Cura. Autodetection of the right port does not work in the new versions and they have removed the option to manually select the port. But the newer versions did have a settings profile for the printer and I simply set up a completely new profile in the old version and copied all settings from the newer version manually.
It's now printing again and it has become a different printer. It has become much faster. The messy print took 16 hours with a layer height of 0,15 mm. The new profile says 12 hours at a layer height of 0,1 mm (!). I had to restart the print because the default infill was far too low and I had forgotten to change it. Now it's printing with far higher infill and 0,15 mm layer height. 9.5 hours now, so we shall see in the morning. And no stringing at all so far!
I have lived with several Zen masters - all of them were cats.
His last invention was an evil Lasagna. It didn't kill anyone, and it actually tasted pretty good.
|
|
|
|
|
Excellent! Hope it works out.
Mine finds the printer (on USB) every time without problems. Perhaps you have some other device connected that is confusing things? Just a guess - I'm not a Cura expert.
"I have no idea what I did, but I'm taking full credit for it." - ThisOldTony
"Common sense is so rare these days, it should be classified as a super power" - Random T-shirt
AntiTwitter: @DalekDave is now a follower!
|
|
|
|
|
I have a small USB hub so that I don't have to crawl behind the desk every time I want to plug something in. I think that the USB driver does not like the hub.
The strangest device that once in a while gets plugged into that hub is the T-Rex's gyro, but it never had any problems with the hub or the printers.
I have lived with several Zen masters - all of them were cats.
His last invention was an evil Lasagna. It didn't kill anyone, and it actually tasted pretty good.
|
|
|
|
|
There's an opportunity for you here. One of your comments on the images was about the "wood-like texture" after some sanding.
You could go for a steampunk version of the Eagle!
Software Zen: delete this;
|
|
|
|
|
Even more changes to the model. How about a huge baloon to lift it up and large propellers to push it forward instead of rocket engines? The pilots wear suits and top hats. And lots of bolts and rivets on the metal parts. AIR 1899.
George Lucas always was looking for ideas. It's not a coincidence that 'Space 1999 Eagle' and 'Millenum Falcon' sound somewhat similar.
I have lived with several Zen masters - all of them were cats.
His last invention was an evil Lasagna. It didn't kill anyone, and it actually tasted pretty good.
|
|
|
|
|
Saw someone use their Dremel to remove "curb rash" from rims; I need to use mine more (sanding, etc.)
It was only in wine that he laid down no limit for himself, but he did not allow himself to be confused by it.
― Confucian Analects: Rules of Confucius about his food
|
|
|
|
|
Any of you who've ever started to drink Orange Juice after brushing their teeth has discovered that it was not a great idea and is very much worth not repeating.
I'd always attributed this to the mint component of the toothpaste. I made and error in this by not checking with something like peppermint tea to determine explicitly if mint were to blame - the nasty of the toothpaste induced experience did not encourage such a test.
So this morning I googled for the negative effects of peppermint on the taste of orange juice and found it to be essentially a blank in terms of relevant answers. Then I switched to toothpaste instead of mint and here[^] is the reason.
For persons such as myself, who quaf Orange Juice by the pint, this is an important revelation. The those of you who don't partake, add it to your bar-room trivia
| Ravings en masse^ |
|---|
| "The difference between genius and stupidity is that genius has its limits." - Albert Einstein | | "If you are searching for perfection in others, then you seek disappointment. If you seek perfection in yourself, then you will find failure." - Balboos HaGadol Mar 2010 |
|
|
|
|
|
1. Brush teeth
2. Shave (wet)
3. Minty mouthwash
4. Shower
5. Drink OJ, and it tastes fine.
|
|
|
|
|
How are shave and shower playing a role here? 
|
|
|
|
|
They increase the time between brushing teeth and drinking juice, thus allowing the taste receptors to get back to normal.
|
|
|
|
|
My "analysis" then, is that you allowed the receptors to return to normal and then had a swig of minty mouthwash for a test?
| Ravings en masse^ |
|---|
| "The difference between genius and stupidity is that genius has its limits." - Albert Einstein | | "If you are searching for perfection in others, then you seek disappointment. If you seek perfection in yourself, then you will find failure." - Balboos HaGadol Mar 2010 |
|
|
|
|
|
No, it's just the order in which I do things. I have had dental implants and the mouthwash I was prescribed after the surgery was not effective if used immediately after brushing. So when I returned to 'normal' products I carried on doing things in the same order.
|
|
|
|
|
Sandeep Mewara wrote: How are shave and shower playing a role here?
I'm guessing it is all about the time delay. 
|
|
|
|
|
Shaving and showering your teeth can help remove the taste of toothpaste before you drink the juice.
|
|
|
|
|
Oh I don't shave my teeth.
|
|
|
|
|
Depilatories ?
REMEMBER: If you can't brush after every meal then comb!
| Ravings en masse^ |
|---|
| "The difference between genius and stupidity is that genius has its limits." - Albert Einstein | | "If you are searching for perfection in others, then you seek disappointment. If you seek perfection in yourself, then you will find failure." - Balboos HaGadol Mar 2010 |
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
