|
I'd have a look at SolarWinds NPM Network Monitoring Software - Network Monitor | SolarWinds[^] - it has a discovery tool - but cheap it is not  I only know of them because I used to use KiwiSyslog a toolset they bought
(I used to have a discovery tool based on WNETEnum ... that fed the data to Visio to draw, but have log lost where I put it - it was a DDJ tool, and I cant recall if it did switches or just 'anything ip')
Check out SPLUNK while you're at it and see if it does discovery
|
|
|
|
|
Thank you Garth, I appreciate it. 
The difficult we do right away...
...the impossible takes slightly longer.
|
|
|
|
|
I dont know if you found anything useful .. I found the original article I thought of (but it only does PC's, Printers etc) Visualizing Network Resources Using Visio | Dr Dobb's[^]
Im not sure what your motivation is Richard - if you were being paid, and had to write a tool (that was cheaper than SolarWinds for example), Im sure you could gather a list of all the tcp/ip addresses on your network, and then reduce/filter the list perhaps (eg remove PC's, printers ...) , leaving a list of addresses you could then issue SNMP calls against (for instance) ... thats what I would do
|
|
|
|
|
Depends on the switch.
Normally I would use a tool from the manufacturer.
Otherwise you would use a tool that implements LLDP (Link Layer Discovery Protocol) for low level switches, unless it's a Cisco, they have their own protocol (CDP).
If it's a high level switch SNMP should suffice.
|
|
|
|
|
Thank you.
The difficult we do right away...
...the impossible takes slightly longer.
|
|
|
|
|
I think this will ease out the problem, let me try this. Thank you
|
|
|
|
|
|
hi..everyone..i want to install ]project open[ version 4 on fedora server.can anyone tell me what are the exact procedure/steps to install it from scratch..any help would be appreciated..
|
|
|
|
|
|
a. I have a Sony Vaio Notebook with a nearly full 256GB SSD drive, 8GB Ram - its seems like its quick to overheat and shuts itself down frequently, especially if there's a lot of network traffic
b. I have a MacBook Pro, 15", 500GB SSD
c. I cant afford to purchase a new system (Windows or Mac) AND I'd like to migrate the 'content' off the Sony Vaio
My plan/thoughts goes something like this
- Upgrade the SSD in the Macbook Pro to 2TB
- Install Mac Parallels on the MacBook Pro
- Import the Sony Vaio as a VM onto the MacBook Pro (yeah, its going to be a mutha of a VM)
- If the 'Vaio VM' is usable, good, if not, continue
- Create a new Windows 7 VM on the MacBook under Parallels (maybe on an external drive), Install VS 2015 Onto it (the Sony Vaio only has VS2010 on it)
If I can get past step (3), my big worry is if Parallels can actually handle a VM that size
Any thoughts ? or do I download the 14 day trial of Parallels and 'jfgowi' (just freaken get on with it)
|
|
|
|
|
I don't have a Mac, but a quick Google shows a lot of results for using large VM images. Most VM software can support VMs of >= 1TB, so I don't think it will be a problem.
What do you get when you cross a joke with a rhetorical question?
The metaphorical solid rear-end expulsions have impacted the metaphorical motorized bladed rotating air movement mechanism.
Do questions with multiple question marks annoy you???
|
|
|
|
|
cheers - Im on pain meds for a back issue at the moment, its affecting my google-fu 
|
|
|
|
|
I hope you feel better soon! One of my friends has a Hyper-V VM with a 64 TB drive and it works fine (he is using a RAID system to store it). I don't know what he has on it, but I do know it is about half full.
What do you get when you cross a joke with a rhetorical question?
The metaphorical solid rear-end expulsions have impacted the metaphorical motorized bladed rotating air movement mechanism.
Do questions with multiple question marks annoy you???
|
|
|
|
|
I don't do Mac, but a previous coworker swore by Parallels. He had a Mac with Ubuntu and Windows VMs, that's how he did all his work.
|
|
|
|
|
lately since I did a code release for a Webforms project running on Server Core 2012 IIS, I've been getting a much larger number of these errors.
Most of them come from bots and crawlers, but a majority are coming from lets say Android phones from Sprint.
I did the machine key in the web config, really didn't make a difference.
The errors are on embedded scripts and images in a DLL. I can see now that there coming from encypted pages, SSL pages. Hmm?
I've been getting reports of users being kicked out when this error occurs on mobile phones.
Request information:
Request URL: https:
Exception information:
Exception type: HttpException
Exception message: Unable to validate data.
at System.Web.Configuration.MachineKeySection.EncryptOrDecryptData(Boolean fEncrypt, Byte[] buf, Byte[] modifier, Int32 start, Int32 length, Boolean useValidationSymAlgo, Boolean useLegacyMode, IVType ivType, Boolean signData)
at System.Web.UI.Page.DecryptString(String s, Purpose purpose)
at System.Web.Handlers.AssemblyResourceLoader.System.Web.IHttpHandler.ProcessRequest(HttpContext context)
|
|
|
|
|
I have installed SQL server 2008 R2 and I have created databse engine instance. I am configuring mail setup. What should be in the field of server name? I am new to this and don't know what to put there. Please help me out.
|
|
|
|
|
The name of your SMTP server that will be used to send the mail
=========================================================
I'm an optoholic - my glass is always half full of vodka.
=========================================================
|
|
|
|
|
On New Database Mail Account screen, for Server Name specify your SMTP Server name like
Hotmail: SMTP server name: smtp.live.com, Port number: 587
Gmail : SMTP server name: smtp.gmail.com, Port number: 587
Yahoo : SMTP server name: smtp.mail.yahoo.com,Port number : 25
AOL : SMTP server name: smtp.aol.com, Port number : 587
The server requires a secure connection (SSL) - check this box
|
|
|
|
|
Here's what's going on...
- I have 18 URLs with approaching renewal dates at GoDaddy
- Prices range from $9 to $20 depending on the top level domain
- The prices seemed inconsistent to me; fred.info had a different price from barney.info
- Called a couple of other places
- Domain.Com[^] seemed to have better prices
GoDaddy wants me to (but is not requiring me to) renew for 2 years on each name.
The total is about $510 (five hundred, ten dollars) for the two year package.
The average price works out to a little over $14 per domain name. (I think it's $14.14)
Is it time to stick with the same place I've been for five or ten years, or jump ship ?
|
|
|
|
|
At home I got Windows 10 Pro.
I also have Hyper V with a few virtual machines, including another (virtual) Windows 10 (pro) machine.
I am trying to share file between the two! Doesn't work!
My VM use an External (Virtual) Network switch
On my local (real) PC I have a file share available to everybody (read/write access).
On my VM, in the file explorer > network, I can see my (real) PC, but I can't open the file share!!
Any idea how to progress from there?! 
|
|
|
|
|
OK.. so I have an application built on the .NET 2.0 framework with a MySQL database which needs to run on a 64-bit Windows 2008 Server (with service Pack 1)
After installing it, in order to get it to run, I have to go to the application pools in IIS, find the relevant one, click on Advanced Settings, and set "Enable 32-bit applications" to True.
That works - otherwise I get a "Server Error in '/' Application. ... is not a valid Win32 application" page.
Trouble is though, as soon as I do set this, while simple pages display al;right, as soon as I get to one that requires database access I get this error:
ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified
If I set "Enable 32-bit applications" to False, I can run a simple test page that access tha database (uncompiled, with inline server code) and this works fine - so the connector is working adn the connectionstring correct.
All of which kind of leaves me between a rock and hard place. Any ideas gratefully received!
|
|
|
|
|
You've created an ODBC data source using the 64-bit version of the ODBC Administrator tool. You need to create it in the 32-bit version of the tool, which is located at: %SystemRoot%\SysWOW64\odbcad32.exe
Data Source Names and 64-Bit Operating Systems[^]
"These people looked deep within my soul and assigned me a number based on the order in which I joined."
- Homer
|
|
|
|
|
I have no idea how to even do that... I ahve never "created an ODBC data source" in my life. All I do is add some code to create it in my asp.net code behind, then assign it a connectionstring
"Provider=MSDASQL;Driver={MySQL ODBC 5.1 Driver};server=localhost;database=xxx;uid=xxx;pwd=xxx"
|
|
|
|
|
Hi everybody. I bought a hosting to a server (no matter which are), and there I made a MySQL database ... and I want to connect to this MySQL database, through ODBC.
When I tried to connect through ODBC driver GUI, I get [Connection failed. Can't connect to MySQL server on 'mydomain.com'(10060)] error.
On server side, I had done everything to be able to connect (add my IP on remote MySQL list, create user, pass, and database, grant all rights to user, etc.).
But the guys from hosting said that I will be able to connect on my MySQL DB through localhost .... it is possible to do that ? If yes, how ? Can you help me ?
Thank you.
|
|
|
|
|
You have to check with the hosting services in what way MySQL configured...You have two main options...
1. MySQL accessible only from applications running on the hosted server...
2. MySQL made public and you can use it from the outside world...
In my experience it is always the first option you get...
But! also in this case you can access your data from outside, by adding a layer - of some API - of software to it...
Skipper: We'll fix it.
Alex: Fix it? How you gonna fix this?
Skipper: Grit, spit and a whole lotta duct tape.
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
