|
Eddy,
This example made it clear to me, I think I understand what it's doing.
Now I can try to rewrite the code to my needs.
Thank you for taking the time to help me 
Ambertje
|
|
|
|
|
Ambertje wrote: I want to make a dayset so that we only read one single day into the DB on top of the existing data and not the whole year.
I don't see what that has to do with partitions - the database of course wouldn't have anything to do with reading files.
Ambertje wrote: and takes a long time to process.
Someone should optimize that process. I wouldn't be surprised if that means moving it out of SSIS but maybe it can be sped up as is.
Normally one profiles a process by actually timing the various parts and then using that data to determine where things can be made faster.
Although your description might suggest that every day you read the previous years data. If so one obvious optimization there would be to some producing a file that has a years worth of data. How one does that depends on the data.
|
|
|
|
|
The best way to understand this is to create a couple of tables and experiment.
It is quite difficult to explain what is going on in a partition statement - the closest I can get is transposing data in Excel.
However that does not explain how to go about transposing the data.
Think of it as changing column headings into row contents and row contents into column headings.
“That which can be asserted without evidence, can be dismissed without evidence.”
― Christopher Hitchens
|
|
|
|
|
Many thanks to everyone who is helping me, I really appreciate the effort you put into it to help newbe's.
Ambertje
|
|
|
|
|
Hi everyone,
I am creating a query to my database using SQL Server Management Studio
There is a data error in my image field of my row. I still can select another fields, but when I select content of the image field I get below error:
My query:
select diagram from Mytable where id = 5
Error 1:
A transport-level error has occurred when receiving results from the server. (provider: Shared Memory Provider, error: 0 - No process is on the other end of the pipe.)
When I tried to delete this row. I got another error (Error 2):
SQL Server detected a logical consistency-based I/O error: incorrect checksum (expected: 0x4da7af2c; actual: 0xda5e9af7). It occurred during a read of page (1:40403) in database ID 6 at offset 0x00000013ba6000 in file 'D:\CLCData\23_01_2013\CLC_LIS_Data.mdf'. Additional messages in the SQL Server error log or system event log may provide more detail. This is a severe error condition that threatens database integrity and must be corrected immediately. Complete a full database consistency check (DBCC CHECKDB). This error can be caused by many factors; for more information, see SQL Server Books Online.
When I select all data from the table, I got the error 1 at the above row position.
So, now I can't update or delete this row. Do you know this problem and how to fix it ?
Thank you very much,
Tai
|
|
|
|
|
Have you done what the error message suggested?
Never underestimate the power of human stupidity
RAH
|
|
|
|
|
Hi,
I checked the log error file. For the select query, I got the below error:
Error: 7886, Severity: 20, State: 1.
2014-07-14 11:27:01.50 spid52 A read operation on a large object failed while sending data to the client. A common cause for this is if the application is running in READ UNCOMMITTED isolation level. This connection will be terminated.
For the delete statement, I got the message:
Error: 824, Severity: 24, State: 2.
2014-07-14 13:34:10.12 spid51 SQL Server detected a logical consistency-based I/O error: incorrect checksum (expected: 0x4da7af2c; actual: 0xda5e9af7). It occurred during a read of page (1:40403) in database ID 6 at offset 0x00000013ba6000 in file 'D:\CLCData\23_01_2013\CLC_LIS_Data.mdf'. Additional messages in the SQL Server error log or system event log may provide more detail. This is a severe error condition that threatens database integrity and must be corrected immediately. Complete a full database consistency check (DBCC CHECKDB). This error can be caused by many factors; for more information, see SQL Server Books Online
But, I don't know how to fix it.
|
|
|
|
|
 Execute DBCC CHECKDB int SQL Server Management Studio, just like the error message tells you, then see what the results of the check are.
Never underestimate the power of human stupidity
RAH
|
|
|
|
|
You have a damaged data file or the disk is damaged. You'll want to run the DBCC as the error suggests and see if you get additional details.
There are only 10 types of people in the world, those who understand binary and those who don't.
|
|
|
|
|
I quite don't understand why noone is using the WHERE-Syntax for table joining ...
I always see something like
SELECT O.Order_No, C.Address, F.Address
FROM Orders O
JOIN Address C
ON O.Customer = C.ID
JOIN Address F
ON O.Forwarder = C.ID
For me, the most irritating thig is the spreading of table names and aliases all over the Statement.
I prefer
SELECT O.Order_No, C.Address, F.Address
FROM Orders O, Address C, Address F
WHERE O.Customer = C.ID
AND O.Forwarder = F.ID
- It's shorter
- All table names and aliases are together
Arguments, anyone ?
|
|
|
|
|
Klaus-Werner Konrad wrote: Arguments,
Nope, I call them Oracle joins (I loathe Oracle) because that is the way I was taught in the 90s then I moved to SQL SErver and was introduced to the JOIN and have never used it since.
I will refactor any procedure I see using them and have a short, sharp discussion with the dev that uses it. Use join or quit.
Never underestimate the power of human stupidity
RAH
|
|
|
|
|
Mycroft Holmes wrote: Nope, I call them Oracle joins
Yeah - a really qualified Response ...
I ask for arguments, an your resposne is
Mycroft Holmes wrote: I will [...] have a short, sharp discussion with the dev that uses it
THIS is my Intention - to have a DISCUSSION about it !
But you have obvoiously no arguments, but prejudices against it - not the ideal base for discussions.
What would be your arguments in a discussion with your developer - do you even have any arguments ?
Note: I asked politely for arguments for - or against - my preferation, because (as every of us) I want to improve my abilities, and also to give some impressions to SQL newbies to decide what to do, and not to do.
So ...
HAVE VOU ARGUMENTS, or are you just felt to open your mouth ... ?
|
|
|
|
|
Klaus-Werner Konrad wrote: THIS is my Intention - to have a DISCUSSION about it !
So we are supposed to be telepathic so we can identify your INTENTIONS.
You stated that you prefer the JOIN format, then you asked for arguments to that position. Nowhere did you mention discussion.
I stated that I had no argument and qualified why. In other words I was supporting your preference!
I did not down vote your question or response (was not even aware you had been) as the question was valid and the response just means you are a bit pissy this morning.
Never underestimate the power of human stupidity
RAH
|
|
|
|
|
Well - the title should be clear enough, and I presented JOIN syntax and WHERE syntax,
expressing my worry about noone seems using WHERE.
THEN I asked for arguments - obviously (I thought so) WHY noone is using WHERE syntax,
and NOT to support my preference.
In other words: Are there any points (other than preference) to not using WHERE syntax ??
|
|
|
|
|
Klause,
theoretically, the first approach is more optimized and can give better performance while working with large data sets.
WHY?
In first approach, the intermediate tables are expressed clearly and the steps to arrive the result is evident.
eg:
step1 -> Create Intermediate table I : O join C on ID
step2 -> Result R : I join F on ID
this is optimum route to reach the result.
How about second approach?
In a simple case, SQL optimizer might arrive at same steps by analyzing the tables and columns used in WHERE clause but not always. Especially when the WHERE clause is relatively complex.
|
|
|
|
|
I was under the impression there was no difference by the time the optimizer had done it's job so I have always based my bigotry opinion on the readability.
Never underestimate the power of human stupidity
RAH
|
|
|
|
|
Generally there isn't, but in specific cases there are.
|
|
|
|
|
The downvote you got is stupid because the question is valid.
The problem is though that readability isn't the same as clarity of intention, and there is more to it than you see at the first glance.
Firstly, when using an ANSI Join you specify which TABLES to join.
When using an implicit join you specify which fields to join on.
This is normally not making any difference, but it might in some specific cases.
Consider this query:
SELECT O.Order_No, C.Address, F.Address
FROM Orders O, Address C, Address F
WHERE O.Customer = C.ID
AND O.Forwarder = F.ID(+)
AND F.OtherID = 1 Is it the same as:
SELECT O.Order_No, C.Address, F.Address
FROM Orders O
JOIN Address C
ON O.Customer = C.ID
LEFT OUTER JOIN Address F
ON O.Forwarder = F.ID
AND F.OtherID = 1or:
SELECT O.Order_No, C.Address, F.Address
FROM Orders O
JOIN Address C
ON O.Customer = C.ID
LEFT OUTER JOIN Address F
ON O.Forwarder = F.ID
WHERE F.OtherID = 1
The difference is crucial as the results differ.
Secondly, when using an implicit join there is no way to force the optimizer to do the joins in a certain order, which normally is a good thing. The optimizer is usually better than many people on that.
But sometime you know better than the optimizer and can force the joining order as such:
SELECT O.Order_No, C.Address, F.Address
FROM (
Orders O JOIN Address C
ON O.Customer = C.ID
) JOIN Address F
ON O.Forwarder = C.ID
My personal pet peeve is that a field should always have the same name everywhere in a database just like the ISO standard says. 
|
|
|
|
|
I'm curious, and lazy, which result does the first query match. I no longer remember the relevance of the (+), left outer join I believe whereas the intention may have been to filter the forwarders.
Never underestimate the power of human stupidity
RAH
|
|
|
|
|
The second one, to match the first one the query would need to look like this:
SELECT O.Order_No, C.Address, F.Address
FROM Orders O, Address C, Address F
WHERE O.Customer = C.ID
AND O.Forwarder = F.ID(+)
AND F.OtherID(+) = 1
|
|
|
|
|
When it comes to the relevance of the (+), think of it as the side that allows nulls (+ nulls)
|
|
|
|
|
Wrong - it's the OPPOSITE side that can be NULL, as in O.Forwarder = F.ID(+)
Here, O.Forwarder my be NULL, but F.ID can NEVER be NULL (it's usually the primary key)
|
|
|
|
|
Have a look here[^]
Want to change your mind?.
|
|
|
|
|
Klaus,
(+) is deprecated OUTER JOIN syntax. It's not about allowing or not allowing NULL.
O.Forwarder = F.ID(+) means include all rows from O even if there is no match in F.
O.Forwarder(+) = F.ID means include all rows from F even if there is no match in O
|
|
|
|
|
Thanks for your thoughts, Jörgen.
Of course the results differ, and to achive the correct result,
one have to write
AND NVL( F.OtherID, 1 ) = 1
Quote: My personal pet peeve is that a field should always have the same name everywhere in a database just like the ISO standard says
Don't know where you read this, but it cannot be right ...
Even in my original simple example you have two addresses in tho ORDERS table, so there is no chance in having 'the same field always the same name'.
Maybe you meant that a field with the same MEANING should have always the same name, like CUSTOMER, FORWARDER etc. ?
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
