|
This application is beyond cool. It has a high learning curve, and the website needs some lovin'. But, this bad boy has made it so much more easy (relatively speaking) to automate the generation of charts from raw data when doing market analyses, rather than using Excel over and over.
gnuplot homepage
Edit: Some demos if you're so inclined.
Jeremy Falcon
modified 11 mins ago.
|
|
|
|
|
I'm very peculiar about the keyboard and mouse I'm using. Especially for my daily driver.
I'll tolerate anyone's mouse when I have to use their system, and I'll adapt to different keyboards given enough time, but I'm particularly finicky about my mouse. I still think the best mouse I've ever used was Microsoft's old IntelliMouse (their very first laser one, without a ball). Sadly at one point Microsoft stopped making them, and I spent years replacing mice after that, trying to find the ideal one, because I knew the mouse I was using wasn't going to last forever.
Then years later Microsoft revived it as the "Classic IntelliMouse". Tried one - and despite the change in color (and some white LED they somehow felt was necessary to have), it felt and performed the same. So I bought 5. Given the last one I had been using was still functional, I figured 5 would outlast me.
That wasn't all that long ago.
This morning I've opened the box for the last of those 5. What happened to quality control, MS?
The 4 others all developed problems that became severe enough I just moved onto the next one in the pile. Either the right or left buttons became too sensitive (or I had to hammer them hard). Or the on-screen pointer started moving erratically, even though I wasn't even touching the mouse. This time it was the scrollwheel - move down one 'click', it moved up by 3 and then back down by 1. The faster I tried to scroll down, the faster it scrolled up. That sort of thing. Rather infuriating.
After having put up with this for months, this one feels like bliss again. But how long will it last? I checked on Amazon, and it's either discontinued (once again), or people want hundreds of dollars for them.
No, I don't have a question. I'm not even asking for alternatives. "What happened to quality control" was rhetorical. I know what happened. I'm just commiserating.
 
|
|
|
|
|
Like everything else, built to fail.
I think sales people invented the concept.
Definition of a burocrate; Delegate, Take Credit, shift blame.
PartsBin an Electronics Part Organizer - Release Version 1.3.1 JaxCoder.com
Latest Article: EventAggregator
|
|
|
|
|
If the warranty worked off of the "first use" date rather than purchase date, I probably could've returned them all for replacements. That's how quickly they all failed.
|
|
|
|
|
Sales team was/is really motivated?
Definition of a burocrate; Delegate, Take Credit, shift blame.
PartsBin an Electronics Part Organizer - Release Version 1.3.1 JaxCoder.com
Latest Article: EventAggregator
|
|
|
|
|
When is the last time you've seen a doctor?
"the debugger doesn't tell me anything because this code compiles just fine" - random QA comment
"Facebook is where you tell lies to your friends. Twitter is where you tell the truth to strangers." - chriselst
"I don't drink any more... then again, I don't drink any less." - Mike Mullikins uncle
|
|
|
|
|
Hi,
I have written a bit of Code to talk to bit of hardware. All good I now having to document it for the records,
In the past I have worked on embedded and analogue test rigs which can be covered by a flowchart and a listing.
This will not work for a Windows program there is too much going on compared to a PIC or Atmel. Is there a way of creating the asked for without going mad? It can't be too odd as I think there must be other companies who need this...
|
|
|
|
|
Welcome to a reason I don't do desktop and server development anymore.
The truth is I've only ever done flow diagrams for embedded code.
To verify desktop applications, rather than design a flow diagram, I design a test matrix. My functional requirements basically dictate the tests.
If you really must diagram your software's behavior, you could use UML, but it won't make things easier, just more comprehensible because anyone with a UML background could understand it.
UML - Behavioral Diagram vs Structural Diagram[^]
Adding: To my mind this is the difference between programming realtime systems and programming non-realtime systems - realtime systems are predictable enough to diagram. As a rough rule of thumb anyway.
Check out my IoT graphics library here:
https://honeythecodewitch.com/gfx
And my IoT UI/User Experience library here:
https://honeythecodewitch.com/uix
|
|
|
|
|
Well, there's the high level stuff:
1. What does the hardware do, and why?
2. What are the requirements for the code?
Mid-level stuff:
1. How to integrate the code into a project
2. How to test the code and hardware
Low-level stuff:
1. What are the "public" methods to initialize the code & hardware
2. What are the "public" methods to interact with the hardware -- read/write/reset/diagnostics, etc
3. What is a typical use-case scenario
4. What are the best practices for initialization and shutdown of the code/hardware?
5. What parts of the code are thread-safe, what parts are not? (I would assume none of it is thread safe, but who knows.)
Nano-level stuff:
1. Describe the low-level interface between the code and the hardware.
2. Describe signals and timing (or include the specs on the hardware)
3. Describe specific constraints on the code, like, are there timing dependencies
4. Describe interrupts the code uses when interacting with the hardware
My 2c of some ideas, dredging up memories of documentation I've written in the past for software-hardware stuff 
|
|
|
|
|
Can a part of the documentation be written within the code itself, aka, self documenting code. In the form of class headers, function headers, etc.
And the remaining part of documentation as a high level document giving the overall architecture, hardware interfaces, assumptions, limitations, errors, etc.
|
|
|
|
|
Doxygen homepage[^]
It's something you have to do as you write but when done it's a flexible doc system.
Definition of a burocrate; Delegate, Take Credit, shift blame.
PartsBin an Electronics Part Organizer - Release Version 1.3.1 JaxCoder.com
Latest Article: EventAggregator
|
|
|
|
|
[tl;dr]: Is RAID5 really causing such a huge performance hit?
I have a system (a Hyper-V VM host) with both eSATA and USB3.0 connectors.
I have a retired set of 8TB drives. I got myself a Mediasonic HFR2-SU3S2 PRORAID 4-drive enclosure, which can use either connector.
I love how trivial this enclosure's RAID setup is. I chose RAID5, so I have a total of 24TB worth of storage. Performance however makes it downright unusable. I could leave my VMs powered down overnight to back them up, but what I'm currently seeing could take days. Backing up a VM while it's running is just not a good idea (I use robocopy) so the VMs have to remain down while backing them up. That's not gonna fly during my workweek.
I made sure that, whether I'm using USB3 or eSATA, the "Better Performance" radio button is selected in Device Manager / Disk drives / [the RAID enclosure] / Properties / Policies.
Write operations hold steady at ~2.6MB/s. Active time is flat at 100%.
Same setup, but using eSATA instead, holds steady at ~5MB/s. Better, but still way below expectations. I'm questioning what my expectations should be.
The OS sees the RAID, not individual drives. On top of that, I use VeraCrypt to encrypt the entire RAID. I understand RAID involves some overhead, especially for Write operations--parity calculations would be done by the enclosure hardware, not my VM host's CPU. OTOH, VeraCrypt also introduces its own overhead, and that would be done by the host's CPU (which holds steady at ~3-4% when copying, so that's hardly the killer).
Before I got the RAID enclosure, I backed up the VMs onto a single external disk over USB3, and there was always plenty of time to do the whole thing overnight. I forget what I got in terms of transfer rate, but I'll be sure to pay attention the next time I do it - surely at least 10x the current performance. That single disk is also encrypted with VeraCrypt, so--unless I'm missing something--the only thing left that can account for the difference in transfer rate is the fact that the target drives are set up in a RAID, as opposed to transferring to a single drive.
My (somewhat rhetorical) question is: Really?
Does my diagnostic make sense? Is the fact that I'm backing up to a RAID the real performance killer? Everything is otherwise the same - both the RAID and my single external drive are connected via USB3, and using VeraCrypt.
Does it make sense at all that RAID5 kills performance to the extent I'm seeing?
What would you expect with a setup like this? I know I'll never get close to USB3's theoretical maximum throughput, but this is insane.
[The RAID isn't indicating any failure, and the last time I've used the drives individually, they were all working fine]
|
|
|
|
|
(Definitely didn't read the whole thing.)
When selecting a RAID level, you have to consider the ratio of reads to writes. Most situations have many more reads than writes and (if I recall correctly) RAID 5 is designed for that. But if your situation doesn't have so many reads, a different RAID level may provide better performance.
|
|
|
|
|
Well, I really only bought the RAID enclosure to maintain an extra backup set. I'm already backing up on single drives, but I had more than enough retired 8TB drives to make a RAID out of them. While I'll sacrifice capacity for performance, there's a limit to what I'll find acceptable. I thought RAID5 was a good compromise. Of course I'd never settle for a purely striped setup.
In theory, the only time I'll ever read back what I have on that RAID is if I my 'live' drives fail and need to restore from the backup. Otherwise the intend is to just re-sync (once a week?) what's different from my live drive back onto it (essentially incremental updates - robocopy's good at that).
At this point I'm thinking maybe I should just do my backups straight from my live drive, onto a single external drive, and then let the RAID bring itself up to date by syncing from the backup instead. Then it doesn't matter if that takes days, since that won't force me to have my VMs powered down when the extra backup is taking place...
|
|
|
|
|
First off, are you sure you've got RAID 5 selected? If you do, and you have 4 8TB drives, the total storage should be far less than 24TB. Depending on how the controller sets the mirrored slices, then you might only see 8 TB.
If the enclosure supports non-raid operation, I'd be tempted to try just one drive with no encryption, and see what transfer speed you get. If it's still poor, then that might suggest that the enclosure itself has poor transfer rates. You might also try it with the other drives, just in case one or more of them has some hardware issue that's slowing the whole thing down. If you get good transfer rates with a single drive, I'd move on to basic mirror (RAID-1), and see how that works out. Maybe try some of the other RAID configurations as available to see if there's a sweet spot that provides good transfer rates and protection from drive failure.
"A little song, a little dance, a little seltzer down your pants"
Chuckles the clown
|
|
|
|
|
I think just about every discussion I've ever seen about RAID capacities said essentially that the capacity for a RAID5 setup (assuming drives of identical sizes) is N-1 (where N is the capacity of one drive). So 24TB sounds right to me.
I suppose I will take the time to try out various combinations, but this is all taking a very long time. I had initially started off with four 4TB drives, and was essentially seeing the same thing under the same conditions.
|
|
|
|
|
You are right about the capacity. I don't know what I was thinking. Something like the stripes were duplicated over the array, something like RAID 5+0 (?). 
"A little song, a little dance, a little seltzer down your pants"
Chuckles the clown
|
|
|
|
|
I forgot all about RAID 5+0; I thought for a minute that was the equivalent of RAID-10, but it's apparently not. Neither is RAID6. Now unless I find something with tables and pretty pictures, I'm more confused than ever about which is which.  But that's not the point.
Suffice it to say that given the capacity/redundancy and the drives I have at my disposal (four x 8TB), RAID5 seemed like the best compromise to me. I would hate to have 32TB worth of drives but get to use "only" half the capacity.
|
|
|
|
|
1. Just a SWAG here, but that level of NAS suggests minimal processing power. Since it is essentially a software RAID, the more writing across disks, the more overhead. Many of these boxes run a slimmed verion of TrueNAS or embedded Linux.
I run a TrueNAS NAS box on a 10 year old Precision 5810 with 2 5TB NAS drives, 5400 RPM. Uses the ZFS file system in a mirrored RAID (software not hardware). I backup via ethernet. Here is a small sample, using Robocopy:
Total Copied Skipped Mismatch FAILED Extras
Dirs : 515 514 1 0 0 0
Files : 2483 2483 0 0 0 0
Bytes : 16.795 g 16.795 g 0 0 0 0
Times : 0:04:39 0:04:12 0:00:00 0:00:27
Speed : 71555803 Bytes/sec.
Speed : 4094.455 MegaBytes/min.
Ended : Tuesday, April 16, 2024 12:18:17 PM
Not great but OK (~69MB). Network supports about 125MB.
I agree with the idea of putting a single drive in your NAS for testing.
2. Veeam will back up running VM's. Community version is free for something like 10 VM's. Not full featured, but with a PS script, you can automate.
Oops, wait: I am not affiliated, associated, known by, etc.
>64
It’s weird being the same age as old people. Live every day like it is your last; one day, it will be.
|
|
|
|
|
I'd be happy with 70MB/s. I'm pretty sure this is roughly what I had with my single drive.
Does Veeam produce straight copies of what you backup, or does it produce backup files that can only be read back by their own software?
|
|
|
|
|
proprietary, but you can mount the backup for individual files/folders, you do have to use their recovery software. I am guessing that veracrypted files could complicate things.
We use a combination of Veeam and Robocopy.
Robocopy for changed/new files nightly to a NAS. NAS has limited connectivity by IP, and there are no mappings to it.
VM's backed up with Veeam monthly (some semi monthly) to removable media, then taken off site.
Got hit by ransomeware before it was fashionable, some 12 or so years ago. Had to recover about 3 days of file changes, rest was backed up and disconnected.
Early ransomeware only encrypted a few file types in those days, ruined a Saturday afternoon.
In the SOHO, I run Linux, as well as ESXi to host VM's and the Veeam agent for Linux works fine although the UI is er um, less than stellar (their support is stellar).
Again, that 4 letter word beginning with F: Free.
I like it better than timeshift because you can image drives and/or partitions.
>64
It’s weird being the same age as old people. Live every day like it is your last; one day, it will be.
|
|
|
|
|
Once bitten, twice shy...I got hit hard a long time ago by some proprietary backup software that created files only it could read, and (I guess) one misplaced bit at the worst possible location was enough to make the entire file unusable. Of course that's when I needed to use the backup.
Since that time I've been sticking with robocopy; the entire tree is identical to the source, and no third-party software whatsoever is needed to access any specific file and without mounting anything. Of course that does nothing for bootable disks and the like, but considering I'm primarily interested in backing up VHD/VHDX files (and not physical disks), I can get away with it.
The entire "disk" is encrypted with VeraCrypt which, in a case like this, is preferable over a file container (.VC files). Since this is a hardware RAID, neither Windows nor VeraCrypt are really aware the underlying disk is actually a RAID (maybe they are, but since this is "supposed" to be transparent, I'm guessing they don't do anything special about it.
|
|
|
|
|
Wordle 1,032 3/6
⬛⬛🟩🟩⬛
🟩⬛🟩🟩⬛
🟩🟩🟩🟩🟩
|
|
|
|
|
Wordle 1,032 5/6
⬜🟨⬜🟨⬜
🟩⬜🟩🟩⬜
🟩⬜🟩🟩🟩
🟩⬜🟩🟩🟩
🟩🟩🟩🟩🟩
|
|
|
|
|
Wordle 1,032 3/6
🟨⬛⬛🟩⬛
⬛🟩🟩🟩🟩
🟩🟩🟩🟩🟩
Ok, I have had my coffee, so you can all come out now!
|
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
