|
Thanx for your fast reply.
I have tried something like this what you have wrote.
Problem of your Code above is that the compiler will generate an error
cause of CDialog has no member m_myEditCtrl. Now i had the Idea to deriver the CDialog Class with my Dialog Class e.g. mySubFormDlgClass. The Code look something like this
mySubFormDlgClass *pdlg = (mySubFormDlgClass*)m_Forms.GetAt(index);
with this Construction there is no error but an Assert @ runtime! So this is not the way. Another Problem is that if i insert some AFX Messages with Classwizard into my mySubFormDlgClass,set breakpoints in this Event Functions and want to debug - there is no interruption. The Event does not occur.
So only a ShowWindow takes places, no DoModal() function. Maybe there is the Problem. If i do a DoModal the Dialog opens but must be closed if i want to use my MainDialog while the other is open. I will research some time on this. Maybe you have some ideas.
Thanks
Andre
|
|
|
|
|
triggerdie wrote:
cause of CDialog has no member m_myEditCtrl
... Of course your CDialog has no m_myEditCtrl variable !!! I cannot guess your variable names  !! This was only an exemple. Sorry for the misunderstanding. I think the articla was just a basis, you have to work on it to get your data retrieved. The easiest way to do this is the one I gave you. So, let's take it again. Change this in the code of SubFormCollection.h :
instead of
protected:
CArray<CDialog*, CDialog*> m_Forms;
put
CArray<CDialog*, CDialog*> m_Forms;
protected:
This will enable you to get at the m_Forms table by setting m_Forms as public.
Now you should have a main dialog, let's say CMainDlg, a CSubFormCollection, and some child dialogs, let's say CChildDlg1 and CChildDlg2 with respectively ressource IDD_SUBFORM1 and IDD_SUBFORM2 (Go in the properties of your dialogs in the ressource editor to set that). Replace these names by your variable names if they are different !!.
First, follow all the steps given in the article, especially step 5 :
CSubFormCollection m_SubForms;
(this in the MainDlg.h file.
and step 6
CRect r;
(GetDlgItem(IDC_SUBFORM_FRAME))->GetWindowRect(&r);
m_SubForms.SetCenterPos(r);
m_SubForms.CreateSubForm(IDD_SUBFORM1,this);
m_SubForms.CreateSubForm(IDD_SUBFORM2,this);
m_SubForms.ShowSubForm();
(this in the CMainDlg::OnInitDlg() file.)
Now you have two subForms, with index 0 and 1.
Then, as an example, place an edit box on the ressource of CChildDialog1, open the class wizard, add a member variable m_myEditCtrl of type CEdit.Close the class wizard.
Add a
m_SubForms.ShowSubForm(0);
in your code (in CMainDlg::OnInitDlg() for instance), to show the first subForm.
You can now retrieve the text entered in the edit box by the user with :
CDialog *pDlg=(CDialog *)m_SubForms.m_Forms.GetAt(0);
CString str=pDlg->m_myEditCtrl.GetWindowText();
Ouf  ... mail me directly your code if you do not get it to run, i'll be glad to help you further.
~RaGE();
|
|
|
|
|
OK. So i made a project and tested the article code, and found out it is totally crap. it is unfinished, sometimes even wrong (under NT, my subFroms were not getting docked in the main dialog) and the Table pointer is not reliable.   Drop it !
As for your code sample, it was because you have cast the pointer on a CDialog, and not on your CDialog name (dlgOpt_ServerPort).
~RaGE();
|
|
|
|
|
two ways.
first.
on the close routine of the options dialog. you send the text you wand to you parent and save it there.
second.
(i dont take a look on the childdlg.asp) if you use a normal dlg. with DoModal. then create your dialog on the stack not on the heap. mydialog* blub = new mydialog; blub->DoModal(); CString myvar = blub->mycstringvar; delete blub;
|
|
|
|
|
I don't know what you mean with SubForm, but if the subform is a dialog placed as a control inside a parent dialog, you can use member functions in the child dialog always...
I mean that is better to use member functions to get the values than getting the values directly by calling SubForm.m_CstringInEditCtrl if you use member functions (GETxxx and SETxxx in order to obtain and modify values) you'll always will be able to readapt the returned value or format the sent value as is desired...
then I would do:
1. from the parent dialog/window/... you'll always have access to the childs.
2. Using the previous premise, you'll be able to call members/methods/functions from the class of the child dialog.
3. I would call methods/functions of the subform in order to get/set the desired values and in order to make it safely.
Hope this helps.
NOTE:
Get and set are only prefixes that I use in order to use the hungarian notation and know what the function do before reading its content.
|
|
|
|
|
Hello Joan,
Thanx for your fast reply. Is it possible do change dynamicly from the parentsDialog to the ChildDialog without to destroy the ChildDialog.
I want to change the HIDE and SHOW behaviour of several Child Dialogs.
How can I do this? Without using of DoModal() only with ShowWindow().
Cause if i do a DoModal() i can not make any interaction with my parentDialog while the ChildDialog is open. Wihtout a DoModal and just ShowWindow it does not work. Assert @ runtime. So i dont know how to solve this Problem. I want to use the Std Afx Message Functions of each Child Dialog. Maybe you have an advice.
See you
Andre
|
|
|
|
|
Hi, everyone!
When reading source code of others, I find they often
use int64 to represent 8-bit integers. I have referenced
MSDN and find the comments there are not enough.
Can anyone tell me where can I find reference about this
topic? Another question, can this data type be used on
Non-windows platform, for example, Linux?
Thanks in advance,
George
|
|
|
|
|
The _int64 data type is compiler specific and might not port. However, gcc supports a data type such as LONG LONG.
If you are looking at porting code to other platforms, then anything that must be size specific should be done with typedefs or defines.
Example:
#if defined (WIN32)
typedef _int64 INT64
typedef unsigned _int64 UINT64
#elif define (WHATEVER_LINUX)
typedef long long INT64
typedef unsigned long long UINT64
#endif
Then in your code only use INT64 or UINT64.
Tim Smith
I'm going to patent thought. I have yet to see any prior art.
|
|
|
|
|
Thanks, Tim buddy!
George
|
|
|
|
|
First _int64 is Microsofht specific.
Second _int64 represents a 64-bit interger.
If you do a search on MSDN, for _int64, you will find at lease 31 seperate entries. If you search for "microsoft _int64" on google you will find over 200 entries, many of which appear to do with porting. I know of no other sources of information on _int64.
Trust in the code Luke. Yea right!
|
|
|
|
|
Thanks, John buddy!
George
|
|
|
|
|
Hi
I'm inserting all kind of columns in a CListCtrl
with structure LV_COLUMN like this:
ColumnVi = new LV_COLUMN();
CString Title;
ColumnVi->mask = LVCF_TEXT | LVCF_WIDTH;
ColumnVi->fmt = LVCFMT_CENTER;
//Inserting
ColumnVi->cx = 35;
Title = "Nr.";
ColumnVi->pszText = Title.GetBuffer(3); m_PersCtrl.InsertColumn(0,ColumnVi);
//Insert the column into the clistctrl
The width of column i've set to 35, i tested it out and changed the value until it looked good. but the caption can change at some time .. so how can i know how much pixels 1 char. takes or anyone have other ideas to make it more dynamic?
Greetings Jens
|
|
|
|
|
You may combine GetStringWidth and SetColumnWidth of CListCtrl.
rechi
|
|
|
|
|
get the HDC (or CDC if you are using MFC) and then use the GetTextExtent[^] api call to determine the string length
¡El diablo está en mis pantalones! ¡Mire, mire!
Real Mentats use only 100% pure, unfooled around with Sapho Juice(tm)!
|
|
|
|
|
I have a client reporting that some of my code crashes on a few of his machines; I can't reproduce the problem on my end (what else is new) and all I have to work with is the crash address he's reporting.
I've had a look at Wouter Dhondt's excellent article on .MAP files[^]...and if I'm following the steps properly, the crash occurs in a memcpy() call...great, according to a search in my project's .cpp files, I'm calling it explicitely 74 times. Since I can't reproduce the crash there's hardly any point in stepping through all of them. Besides, if I understand correctly, the call to memcpy() might not necessarily be any of my own (ie, another C runtime library function might be doing it; who knows which one it is).
Taking it to the next step, I tried to determine what file/line the crash occurs in according to the .MAP file. Again based on the article, subtracting the load address (0x00400000) and the 0x1000 bytes PE header from the crash address (0x00459083), I end up with 0x00058xxx, which is nowhere near any of the addresses listed in the bottom part of the .MAP file. And since I'm within 0x004xxxxx, I'm pretty confident the crash doesn't occur in a DLL. I *know* I'm using the proper .MAP file as I've rebuilt the project (this time set to generate the .MAP file) and sent the client the recompiled EXE (which turned out to be identical to the previous one anyway).
I've tried to get the client to send me Dr. Watson logs and crash dumps, but none seem to ever get generated despite the options being selected (he's on Win2K SP2).
What next? I don't like the idea of sending a client an EXE with MsgBox() calls...
|
|
|
|
|
Run your release version in debug and and the break the program. Use the debugger to see if you have anything at the address in question. If your release program doesn't have any debug information, it would help to enable the program database debug information.
Tim Smith
I'm going to patent thought. I have yet to see any prior art.
|
|
|
|
|
Well...I have *something*, I'm just not sure what it is. Wouldn't this (the memory at the crash address) be in the code segment?
|
|
|
|
|
The address you listed does seem like an IP, however if I remember the access violation dialog box, it lists a few numbers including the address being referenced and the IP of the instruction.
I just like using the debugger since reading map files can be confusing a hell. I have been doing it for 20 years and I still get confused.
Tim Smith
I'm going to patent thought. I have yet to see any prior art.
|
|
|
|
|
> if I remember the access violation dialog box, it lists a few numbers
> including the address being referenced and the IP of the instruction
That's part of the problem, I don't even get that much info on the crash dialog. Here's the full text (and I just realized I was looking at an old screenshot when I made the original post):
>>>
The instruction at "0x00459083" referenced memory at "0x00c70000". The memory could not be "read".
<<<
According to the .MAP file, the closest function (at 0x004590e0) is memcpy(), and 0x000580e0 isn't part of the .MAP file. So I don't know what to do next...
(I'd kill for a stack trace)
|
|
|
|
|
When you are looking at the map file, ignore the first column. Just take a look at the 3rd column. On an NT system, this will be the load address for the main image.
Tim Smith
I'm going to patent thought. I have yet to see any prior art.
|
|
|
|
|
Yeah, the one entitled "rva+base". Given my crash address (0x00459113), here's what I have:
(...)
0001:00058080 __mbsrchr 00459080 f LIBC:mbsrchr.obj
0001:000580e0 _memcpy 004590e0 f LIBC:memcpy.obj
0001:00058415 __onexit 00459415 f LIBC:onexit.obj
(...)
...so the crash seems to occur in memcpy().
I understand the mapping back to the file/line number in Wouter's article...however in my case I don't have anything close to 0x00058113 (or close to that range) in the section where the .MAP file iterates through each source file (in the bottom half of the .MAP file). I'm wondering if there might be another offset I have to take into account that wasn't discussed in the article...my assumption is that I should be able to find an entry similar to:
nnn 0001:00058xxx
...where nnn is the line number in the source file being mapped.
I hope my description is a little clearer.
|
|
|
|
|
The program is crashing in memcpy. You won't have any source lines associated with that.
Tim Smith
I'm going to patent thought. I have yet to see any prior art.
|
|
|
|
|
Not even a reference to which instance of my memcpy() calls causes the crash? 
Back to my original post then...given this, what are my options?
|
|
|
|
|
Hi, everyone!
I want to know where can find a nice online
tutorial about raw socket programming on windows
platform?
Thanks in advance,
George
|
|
|
|
|
How raw do you want it? In terms of winsock programming, one excellent reference is CodeProject.
http://www.codeproject.com/internet/
Kuphryn
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
