|
Emmanuel Medina Lopez wrote: I've been trying to install the package isc-dhcp-server on my Raspberry Pi (using Raspbian Wheezy) but after installing, it fails to start the service. I get this:
Setting up isc-dhcp-server (4.2.2.dfsg.1-5+deb70u6) ...
[FAIL] Starting ISC DHCP Server: dhcpd[....] check syslog for diagnostics. ... failed!
Now, I'm a total Linux noob, what can I do to find the origin of the error and fix it? (first of all where do I find that syslog that I'm supposed to check?)
Also, I'm following this guide[^] but I'm stuck at this point.
G'day Emmanuel,
While I'm no Linux Guru I have been using and supporting it for several years, so I'll try and help where I can.
First up can you tell me if you have the 256MB Type B (Black 3.5mm audio port) or the 512MB Type B (Blue 3.5mm audio port)? I don't think this will be an issue, but I have both and would like to use the same one you are, just in case there is an issue with one and not the other. The other thing I would like to know is what edition of Linux are you running on it.
I have OpenELEC running on the 256MB Raspberry Pi with the 512MB doing nothing. I haven't installed any of the other Linux Distributions to play with yet.
Finally, what SD card are you using? I have had issues with Patriot Class 10 cards (can't be arsed looking up the exact model right now) loading the OS and part way through not being able to be read. Sandisk Ultra cards have been faultless.
Michael Martin
Australia
"I controlled my laughter and simple said "No,I am very busy,so I can't write any code for you". The moment they heard this all the smiling face turned into a sad looking face and one of them farted. So I had to leave the place as soon as possible."
- Mr.Prakash One Fine Saturday. 24/04/2004
|
|
|
|
|
I'm sorry I hadn't answered before, I'm on vacation and away from home. The one I' trying that on is a 256MB Model B one but I don't remember which brand of SD Card (I just remember it's an 8GB Class 10) nor which version of Raspbian I'm using. I'll get back to you when I go back home, Thanks!
If you think you can do a thing or think you can't do a thing, you're right - Henry Ford
Emmanuel Medina Lopez
|
|
|
|
|
Emmanuel Medina Lopez wrote: I'll get back to you when I go back home, Thanks!
Great, thanks for that.
Michael Martin
Australia
"I controlled my laughter and simple said "No,I am very busy,so I can't write any code for you". The moment they heard this all the smiling face turned into a sad looking face and one of them farted. So I had to leave the place as soon as possible."
- Mr.Prakash One Fine Saturday. 24/04/2004
|
|
|
|
|
How to set a wallpaper inside a computer drives background...
|
|
|
|
|
Drives do not have dedicated wallpapers.
Bastard Programmer from Hell 
If you can't read my code, try converting it here[^]
|
|
|
|
|
Respected all ,
I made one welcomenote in my windows 7 . Now i want to remove that welcomenote .I don't know how to do this . Please help me.
|
|
|
|
|
And where do you want to remove it from: system sounds, registry, login ... ?
Use the best guess
|
|
|
|
|
Start > RUN > type in the following > REGEDIT 1) Navigate to: HKEY USERS\ .DEFAULT\Control Panel\Desktop 2) Double click the wallpaper value, and type in the full path of your image
|
|
|
|
|
How to delete RECYCLE BIN from our Desktop..?
|
|
|
|
|
To remove the Recycle Bin icon from your desktop:
- Go to Control Panel;
- Using the search box on the upper-right side, search for "desktop icons";
- Click "Show or hide common icons on the desktop";
- Un-tick "Recycle Bin";
- Click "OK";
"These people looked deep within my soul and assigned me a number based on the order in which I joined."
- Homer
|
|
|
|
|
|
Isn't there also a setting that you can hide the Recycle Bin icon via Control Panel?
|
|
|
|
|
To show or hide the Recycle Bin on the desktop
1.Click the Start button , type desktop icons into the search box, and then click Show or hide common icons on the desktop.
2.In the Desktop Icon Settings dialog box, do one of the following:
•To hide the Recycle Bin, clear the Recycle Bin check box.
•To show the Recycle Bin, select the Recycle Bin check box.
3.Click OK.
|
|
|
|
|
Hi Aatif,
Not sure as which OS you have installe don your machine.
But here is the solution:
on Windows XP -
Open registry
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\Desktop\NameSpace
Locate the following Key and Delete te key
{645FF040-5081-101B-9F08-00AA002F954E}
If you are runing Vista
Right Click on Recyclin Bin and Delete the Key
If you have Windows 7.
You do not have the option to Delete the Recyclin bin.
However you can make that Disable.
Go to Control Panel > Apperanced and personlaisation >
on the Left hand Navigation List select change Desktop Icons and Uncheck recyclin Bin.
Recyclin Bin is disappered.
To enable back follow the same steps and check the Recyclin bin option in change Desktop Icons.
Hope this helps
Regards
Adeeb
|
|
|
|
|
ENVIRONMENT:
Both the server I am working from and the SharePoint server are running on Windows 2008 and both are on SANS. I have a process in SSIS (SQL Server 2008 R2) on my server that needs to copy over the files located on the SharePoint server in order to process them, as per the business rules. If I reboot my server, then the SSIS package, which first checks to see if the files exist, is unable to find the files. However, it will work if I open Windows Explorer on my server and just go to the folder of one of the files on the SharePoint server using a UNC path.
OBJECTIVE:
Be able to reboot my server without having to manually open Windows Explorer in order to validate the location of a file folder on the SharePoint server before the automated SSIS package launches. That is, apply a process that will perform the folder validation upon startup of my server.
ATTEMPT MADE:
Created a batch file called ValidateFolder.bat with the following contents (modified) and applied it to the Startup.
echo %date%
pushd \\SharePointServer\xxx\projects
dir
Of course, this created a temporary mapped drive that disappears and is recreated with each reboot. This is not a problem because it only creates the one mapped drive and no more. Unfortunately, this did not make any difference. It properly launched following the reboot, but the SSIS package still could not find the files on the SharePoint server until I applied the before mentioned manual process using Windows Explorer.
Does anybody have any ideas as to what I can try next?
Thanks in advance.
|
|
|
|
|
I ran a computer technician's tool inside one of my Win 7 virtual machines to see how it works. Soon after running the tool, Windows said it was "Not Genuine" and when I tried to validate, the website said that my product key is "blocked!"
Does anyone know if it's possible that this tool programmatically changed my product key to a blocked key without my knowledge or consent?
Are there Win32 API's for changing the product key?
The difficult we do right away...
...the impossible takes slightly longer.
|
|
|
|
|
Richard Andrew x64 wrote: Does anyone know if it's possible that this tool programmatically changed my
product key to a blocked key without my knowledge or consent?
Doubt it.
Richard Andrew x64 wrote: Are there Win32 API's for changing the product key?
How to update your Windows product key.[^]
Be excellent to each other. And... PARTY ON, DUDES!
Abraham Lincoln
|
|
|
|
|
Richard Andrew x64 wrote: Does anyone know if it's possible that this tool programmatically changed my product key to a blocked key without my knowledge or consent?
Unfortunately... Yes.
Richard Andrew x64 wrote: Are there Win32 API's for changing the product key?
The application may have changed your product key by shell executing the slmgr.vbs volume licensing script.
Best Wishes,
-David Delaune
|
|
|
|
|
Hi,
I have a virtual harddisk file created using a backup software., i was able to attach the file in disk-management [2008 R2] to view the files., When i right clicked the disk management Disk# section, it does not show me, detach option, it just showed me up the offline option. I made the disk offline and detached it from safely remove hardware option.
Now the problem is, i am not able to delete the vhd file, that i detached. On viewing the process explorer it says that the system process is using the file handle. I cannot reboot my server as it is very cruical. Any Suggestions on how this can be done !
Thanks,
Sajith
|
|
|
|
|
I am being moved to the other side of the hall.
This is really a good thing; I think // I hope.
We have no active wires over there; i.e., no phone, no internet.
We want to try a wireless connection through the walls.
No clue what I'm doing; no clue if this is even going to work in the first place.
Is this forum, System Admin the place to ask these questions ?
At the moment, my first question is: What questions do I ask ?
|
|
|
|
|
C-P-User-3 wrote: What questions do I ask ?
- Is there a WiFi router/repeater nearby?
- What is the access key?
With that information you just make sure that WiFi is enabled on your PC and wait for Windows to find the signal. Then follow the on-screen instructions.
Use the best guess
|
|
|
|
|
I was creating problems in my mind which did not exist in real life !!!
Your advice is correct, except, in my case, this was the "fix"...
Turn on notebook computer.
It all worked.
Duh
I was worried that I was going to build small wooden ledges over the two respective office doors, arrange a repeater system, blah blah blah.
I am truly impressed that this worked so, well, duh, it just worked.
|
|
|
|
|
C-P-User-3 wrote: I was creating problems in my mind which did not exist in real life !!!
I did wonder about that.
Use the best guess
|
|
|
|
|
how can use Dashboard in VB.Net ??????
|
|
|
|
|
Not "NOW", I'm at work. Answering is done on a voluntary base, when WE have the time, and when WE feel like it.
FWIW; "dashboard" isn't a standard control in the .NET framework. If you want to know how to use it, ask the one who created it.
Bastard Programmer from Hell 
If you can't read my code, try converting it here[^]
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
