|
Not sure if this will work or not, but in the message handler for EN_KILLFOCUS, check where the focus "went" with GetFocus[^] or CWnd::GetFocus[^] (whichever suits you best) and determine if the newly focused control is still "inside" the IP address control. I suspect it has four separate edit fields for each segment and all four have the IP address control thing set as its parent, so i supose a GetParent[^] or CWnd::GetParent[^] call can tell you if the user is still editing the IP address or is trying to leave the control altogether.
If you try this, do share with us if it worked or not, thanks in advance.
> The problem with computers is that they do what you tell them to do and not what you want them to do. <
> If it doesn't matter, it's antimatter.<
|
|
|
|
|
Thank you mat.
You are right.I just call GetFocus and determine weather the
EN_KILLFOCUS comes from the focused control.
BOOL CMyDlg::OnCommand(WPARAM wParam, LPARAM lParam)
{
UINT notificationCode = (UINT)HIWORD(wParam);
if (notificationCode == EN_KILLFOCUS || notificationCode == CBN_KILLFOCUS)
{
HWND hwnd = (HWND)lParam;
if (hwnd == NULL)
{
return false;
}
CWnd* pWnd = CWnd::FromHandle(hwnd);
int nID = pWnd->GetDlgCtrlID();
if (GetFocus() != NULL && GetFocus()->m_hWnd == pWnd->m_hWnd)
{
return false;
}
GetParent()->PostMessage(UM_KILLFOCUS, nID, 0);
}
return CDialog::OnCommand(wParam, lParam);
}
|
|
|
|
|
A bit less "specific" than the approach i might have chosen, but if it works for you, then great! 
> The problem with computers is that they do what you tell them to do and not what you want them to do. <
> If it doesn't matter, it's antimatter.<
|
|
|
|
|
I am looking for a way to save a matrix (essentially an array) of data that has the intensity information for each pixel into an avi file.
I want the avi file to be of no size limits and uncompressed. This is on an NTFS system with windows XP or greater.
Any ideas or tutorials?
PKNT
|
|
|
|
|
AVI is a video file, that is a sequence of frames (and possibly related audio). If you have pixel intensity then you have one frame. Am I missing something?
Veni, vidi, vici.
|
|
|
|
|
Thanks for your reply. Yes, you are correct and we dont even have audio. I already have a way to save videos, but when saving longer videos, I am facing issues such as file index corruption etc and these longer videos are very important for us as they are research data.
I am looking for a new better way tos ave videos without any problems.
PKNT
|
|
|
|
|
|
Would AVIFileWriteData do the trick?
"The AVIFileWriteData function writes supplementary data (other than normal header, format, and stream data) to the file."
I hope you are well aware that there are at least three Win32 API for working on audio / video files.
The "AVI", "capAVI" and "wave".
I am curently using capAVI and recomend always to use whatever standard status/ error reporting API's are avaiable in the particular set.
Cheers
Vaclav
|
|
|
|
|
Try to Google "ffmpeg" this library helps you to write avi files with very little hassle. You can even choose coded or write uncompressed files using their example code included in the library download.
|
|
|
|
|
hello guys... im trying to write a small recording program. But waveInOpen fails with error code 11. Here is what I am trying.
LPHWAVEIN phWaveIn = NULL;
WAVEFORMATEX pcmWaveFormat;
::memset(&pcmWaveFormat, 0, sizeof(WAVEFORMATEX));
pcmWaveFormat.wFormatTag = WAVE_FORMAT_PCM;
pcmWaveFormat.nChannels = 1;
pcmWaveFormat.nSamplesPerSec = 11025L;
pcmWaveFormat.nAvgBytesPerSec = 11025L;
pcmWaveFormat.nBlockAlign = 1;
pcmWaveFormat.wBitsPerSample = 8;
MMRESULT rResult;
rResult = IsFormatSupported(&pcmWaveFormat, WAVE_MAPPER);
if(rResult != MMSYSERR_NOERROR) return;
rResult = ::waveInOpen(phWaveIn, WAVE_MAPPER, &pcmWaveFormat, 0, 0, CALLBACK_NULL);
if(rResult != MMSYSERR_NOERROR)
{
CString sErrorMsg;
if(rResult == MMSYSERR_ALLOCATED)
sErrorMsg = "Specified resource is already allocated.";
else if(rResult == MMSYSERR_BADDEVICEID)
sErrorMsg = "Specified device identifier is out of range.";
else if(rResult == MMSYSERR_NODRIVER)
sErrorMsg = "No device driver is present.";
else if(rResult == MMSYSERR_NOMEM)
sErrorMsg = "Unable to allocate or lock memory.";
else if(rResult == WAVERR_BADFORMAT)
sErrorMsg = "Attempted to open with an unsupported waveform-audio format.";
}
What could be wrong? Thanks
This world is going to explode due to international politics, SOON.
|
|
|
|
|
Your first parameter is supposed to be a pointer to a handle buffer, it should be:
HWAVEIN hWaveIn = NULL;
rResult = ::waveInOpen(&hWaveIn, WAVE_MAPPER, &pcmWaveFormat, 0, 0, CALLBACK_NULL);
|
|
|
|
|
I'm trying to copy some C code to a C++ class and I've got stuck with a function pointer issue. I've been trying to mess around with calling conventions but I don't want to make my C++ function static and don't want to change the old C code. Thanks for looking.
class theClass
{
public:
int theFunction(int theParam1);
int anotherFunction(void);
};
typedef int (*funcPtr) (int Param1);
int theClass::theFunction(int theParam1)
{
return 0;
}
int function(int theParam1)
{
return 0;
}
bool globFunction (funcPtr aFunction, bool someOtherArg)
{
int anArg = 0;
int ret = aFunction(anArg);
return true;
}
int theClass::anotherFunction(void)
{
globFunction (function, false);
globFunction (&theClass::theFunction, true);
return 0;
}
|
|
|
|
|
If, in your function, you don't access members of the class then it makes more sense to make it static then implement it as ordinary member.
Veni, vidi, vici.
|
|
|
|
|
If I remember correctly, you can't declare a pointer to a non-static member function in native C++. If you need to keep the original functions as they are, I would add a static helper function which gets the class object pointer as additional parameter and calls the member function. Something like that:
int theClass::theFunctionCaller(theClass * obj, int theParam1)
{
if (obj != NULL)
obj->theFunction(theParam1);
}
bool globFunction (theClass * obj, funcPtr aFunction)
{
int anArg = 0;
int ret = aFunction(obj, anArg);
return true;
}
int theClass::anotherFunction(void)
{
globFunction (this, &theClass::theFunctionCaller, true);
}
If you need the globFunction() for different classes, you could pass the obj as void * and cast it back in the helper function, because you know which class it is for at that point.
|
|
|
|
|
Cheers.. I'm having a play with this but you've modified globFunction, which in my case I'm really trying to avoid. Also it wont build as it stands (you can't call non static functions from a static function).
error C2352: 'theClass::theFunction' : illegal call of non-static member function
|
|
|
|
|
If modifying your global function is out of the question, then you can only pass it either a global function or a static class function. There is no other way. As CPallini remarked, the type of a pointer to a nonstatic member function is incompatible with your function pointer type definition.
What's more: a pointer to a nonstatic member function requires more memory to store than a simple function pointer, so casting is out of the question, too!
The question is: what is your goal? You're converting code, so why can't you change that global function?
If you really can't, the only solution I can think of would be a wrapper function that calls your member function indirectly:
namespace wrapper {
class theClass* instance; int theClassWrapper(int arg) {
int ret = 0;
if (instance != nullptr)
ret = instance->theFunction(arg);
return ret;
}
};
int theClass::anotherFunction() {
wrapper::instance = this;
return globFunction(&wrapper::theClassWrapper, true);
}
I've put the required additional global variable and global function inside a namespace to minimize global namespace polution and risk of conflicts, but you cannot avoid these additional globals if you cannot modify your existing global function.
|
|
|
|
|
Thanks for the reply - my original question was based on the premise that my casting or function declaration was wrong in some way - actually it looks like getting a pointer to a non-static class function and then casting it to match the original 'C' functions isn't straightforward.
So solution 1 - make the function and all the class variables static.
solution 2 - examine the original 'C' function that takes the function pointer and re-implement it.
Thanks for looking. 
|
|
|
|
|
It 'isn't straightforward' in the same sense that casting a double to char would be. The types are not the compatible, not even the same size.
|
|
|
|
|
Freak30 wrote: If I remember correctly, you can't declare a pointer to a non-static member function in native C++
Actually you can, e.g.
#include<iostream>
using namespace std;
class A
{
int i;
public:
A(int i):i(i){}
void show() { cout << i << endl;}
};
void (A::*pmfn)();
int main()
{
A a(7);
pmfn = &A::show;
(a.*pmfn)();
}
However (and of course) this kind of pointer is not compatible with C-like function pointers.
Veni, vidi, vici.
|
|
|
|
|
Ok, this is quite interesting. Of course the function pointer is now class specific, and you still need to pass a pointer to the class object. So it seems there is no way around changing the global function.
|
|
|
|
|
What you're trying to do makes no sense. You're trying to call a non-static member function without an instance of the class or any mechanism to identify one.
Steve
|
|
|
|
|
Hello Friends
I am trying to connect to USB Printer. For that I used SetupDi calls but not able to get devicePath using Enuminterface.
So, I tried to pass devicePath manually to CreateFile'first parameter o create Handle.
After searching a lot, I found that the H/W id is being used for devicepath and it is here that i found from registery
LPCWSTR devicePath = L "\\\\?\\USB\\VID_04A9&PID_10A2&REV_0109#{4d36e979-e325-11ce-bfc1-08002be10318}"
In curly brackets represent ClassID for Printer device.[tried USB ClassId too]
But I am getting INVALID_HANDLE always.
So,please let me know the what is right devicepath that i can pass to create file to get its handle.
Thanks In Advance.
Regards
Yogesh
|
|
|
|
|
Take a look at this snippet, it may give you an idea.
This is "under construction" code , not plug and pray!
I use it with strDevice = "USB".
There is a SetupDi API for getting "friendly name", somewhere in my messy code.
DWORD dwFlag = DIGCF_ALLCLASSES | DIGCF_PRESENT;
TRACE("\nSetupDiGetClassDevs %s ", strDevice);
HDEVINFO hDevInfo = SetupDiGetClassDevs(NULL,strDevice, NULL,dwFlag);
if( INVALID_HANDLE_VALUE == hDevInfo ) {
TRACE("\nINVALID_HANDLE_VALUE == hDevInfo ");
return false;
}
TRACE("\nFind all selected devices %s",strDevice);
SP_DEVINFO_DATA* pspDevInfoData =
(SP_DEVINFO_DATA*)HeapAlloc(GetProcessHeap(), 0, sizeof(SP_DEVINFO_DATA));
pspDevInfoData->cbSize = sizeof(SP_DEVINFO_DATA);
int i = 0;
DWORD DataT ;
DWORD nSize=0 ;
TCHAR buf[MAX_PATH];
while (SetupDiEnumDeviceInfo(hDevInfo,i,pspDevInfoData))
{
SetupDiGetDeviceInstanceId(hDevInfo, pspDevInfoData, buf, sizeof(buf), &nSize);
{
TRACE("\nFind LittelWire ");
CString strTest = buf;
// CString strResult = strTest.SpanIncluding("0C9F");
int iFoundIndex = strTest.Find(strDeviceID);
TRACE("\nCount %i Buffer %s",i, buf);
if(iFoundIndex > 0 )
{
TRACE("\nCount %i Buffer %s Device %s found", i, buf, strDeviceID);
return true;
}
}
i++;
}
TRACE("\nDevice %s not found", strDeviceID);
return false;
|
|
|
|
|
Hi,
i have a dialog box and a picture control on that dialog box in mfc. I want to create a button on the right of the screen (similar to "Feedback" button seen on various sites). I created a button and positioned it on the right of the screen, but when clicked on any other control of the dialog box, the button hides under the picture control canvas.
Anybody have any idea.?
Any help will be appreciated.
Regards,
Mbatra
|
|
|
|
|
It sounds like the picture is being redrawn so it will obviously cover the button. Try positioning the button somewhere else.
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
