|
I set up a minimal application which just uses CA2WEX,, and I kept getting the same errors.
Then, I eliminated the CA2WEX and substituted that with an explicit LPWSTR variable .. this, as I expected, eliminated all the Atl errors.
What I didn't expect though (well, almost..) was another error: "internale Error during IncrBuildImage" (LNK1000).
After that, a popup appeared stating that the linker had stopped working .... this sounds quite hilarious to me ....  ))
|
|
|
|
|
Sorry, but I have no real idea of what is going on, and cannot understand what it is about your VS setup that is causing the problems.
One of these days I'm going to think of a really clever signature.
|
|
|
|
|
A couple of seconds ago, I just eliminated the "atlsd.lib" library from the Additional Dependencies ... though I have a "ImageList_Create()" call that, according to MSDN, requires the library "ImgCtl.lib", this library doesn't seem to be anywhere. So I just added "comctl32.lib", and everything linked correctly .
Please don't ask me why, since I did the same thing at the beginning and it didn't work ...
I just ask myself if I can really trust this environment.....
Thank you anyway for the support.
|
|
|
|
|
The environment is fine, but you seem to be using some strange libraries. For example, look at the documentation for ImageList_Create()[^], there is no mention of ImgCtl.lib; what documentation are you working from?
One of these days I'm going to think of a really clever signature.
|
|
|
|
|
I am using MSDN for VS 2008 ... actually when looking at ImageList_create(), I didn't realize I was reading the Windows CE 5.0 documentation, which includes "ImgClt.lib". Just trying I realized comctl32.lib is enough. Anyway the real problem seems to have been my inclusion of atlsd.lib, which I did when I realized the _recalloc() couldn't be linked. I don't know what changed but now it seems to be ok ... anyway I keep having serious doubts about the reliability of the environment , since more than once , building twice the same application without making any change between builds, I got different and contrasting results ...
|
|
|
|
|
There are probably millions of people around the world using Visual Studio to build their applications. If there was such a fundamental flaw in it then I think it would have been brought to Microsoft's attention by now. I have used the express versions (2005, 2008 and 2010) and never come across anything even vaguely resembling your problem. But if you are trying to include CE libraries into a standard desktop application it's little wonder that things are looking strange.
One of these days I'm going to think of a really clever signature.
|
|
|
|
|
Well I agree with you .... even though , there are tons of people who see such strange things and never report to Microsoft ... and most of them don't even dare thinking there's a problem ...  .... Anyway , I don't think what I saw, that is , those two differents results with two builds of the same version, can be caused by any programmer's error....
|
|
|
|
|
tiwal wrote: I don't think what I saw, that is , those two differents results with two builds of the same version, can be caused by any programmer's error
Don't you believe it. I've had many more 'strange' problems that were caused by me, than were caused by Visual Studio.
One of these days I'm going to think of a really clever signature.
|
|
|
|
|
I want to develope web service in c++ (.net 2003).
i have no idea to do it please guide me
|
|
|
|
|
Start here[^].
One of these days I'm going to think of a really clever signature.
|
|
|
|
|
Read here, specifically point #2.
"One man's wage rise is another man's price increase." - Harold Wilson
"Fireproof doesn't mean the fire will never come. It means when the fire comes that you will be able to withstand it." - Michael Simmons
"Show me a community that obeys the Ten Commandments and I'll show you a less crowded prison system." - Anonymous
|
|
|
|
|
Hi All
I need your suggestion for my following questions.
Recently i have buillt one standalone desktop software application and my question is ,
1. Application should be installed only one pc.
2. Once installed single PC it wont work/install otherPC/same PC next time.
3. We cannot used database for that application, also internet connection.
Please guide me how to proceed !
Thanks N Advance
 Failure is Success If we learn from it!!
|
|
|
|
|
This does not look like a C++ question, you may like to try a more appropriate forum. You may also like to explain in more detail what actual problem you are facing.
One of these days I'm going to think of a really clever signature.
|
|
|
|
|
Not a C++ question, and you haven't provided enough information to answer the question without making a lot of assumptions.
So, assuming the platform is Windows, and that the PC is not connected to the internet:
1. Make a pre-install application that reports a unique ID for the PC. If you don't fancy rolling your own algorithm (not recommended), consider using the value found in the Registry at HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProductId which is probably unique and tied to an installation of Windows (see this StackOverflow discussion).
2. Once the user has run this application and reported the unique number, use it, with a secret key and a suitable hashing algorithm, to generate a unique hash tied to this ID. Deliver this hash to the user (in a letter, or email to other PC, or in a text message, or however you like).
3. In the installer, get the unique ID (by reading the Registry above), apply the hashing algorithm, ask the user for his or her hash, and compare the two. If they correspond, this is the correct PC, if not, abort the installation.
4. After installation is complete, Windows Installer will make a that this application has been installed. You can check this at the start of the installer to make sure it's not re-installed.
Basically, if you want to limit an application to be installed on only one PC, you need some way of identifying this single PC. If internet access isn't available, it can't be done during installation, so will need to be done in a two-step process.
|
|
|
|
|
Orjan Westin's suggestion of a unique key is probably the way to go, but you could also consider a hardware "dongle", e.g HASP, KeyLok, SecuTech etc.
The key can be shipped to the customer with the product media, or delivered separately when they request a license, and will ensure only one copy of the software is running per key supplied. Some dongle systems allow for upgrading, enabling additional features, and time-limited trial versions as well.
Days spent at sea are not deducted from one's alloted span - Phoenician proverb
|
|
|
|
|
Hi,
I am using Dialogbar in my application, but i can't resize my dialogbar. It appears in bottom side.
below see my code
if(!m_wndBottomBar.Create(this,IDD_ALM_BOTTOM,CBRS_BOTTOM | WS_VISIBLE|WS_CHILD|CBRS_LEFT|CBRS_SIZE_DYNAMIC ,IDD_ALM_BOTTOM))
{
TRACE0("Failed to create dialog bar\n");
return -1;
}
m_wndBottomBar.SetBarStyle(m_wndBottomBar.GetBarStyle()|CBRS_TOOLTIPS | CBRS_FLYBY | CBRS_SIZE_DYNAMIC);
m_wndBottomBar.EnableDocking(CBRS_ALIGN_ANY);
I have to resize bottom dialog bar any other way to resize my dialog bar?
Please help me ASAP.
|
|
|
|
|
|
Hi,
I am have C++ files (.h, .cpp) that include functions to read a specify file type (.dgn). And I want to use these functions in C# for the same purpose . I am intending use "__declspec(dllexport)" to use C++ functions.
But, I don't know what type in C# is similar to "typedef void *" in C++.
Please see belows is C++ codes
typedef void *DGNHandle;
DGNHandle CPL_DLL DGNOpen( const char *, int );
void CPL_DLL DGNSetOptions( DGNHandle, int );
int CPL_DLL DGNTestOpen( GByte *, int );
const DGNElementInfo CPL_DLL *DGNGetElementIndex( DGNHandle, int * );
Thanks and regards,
|
|
|
|
|
Use the following in google
"C#" interop void pointer
|
|
|
|
|
|
Hi,
Can I use the IntPtr (C#) for structure pointer (in C) ?
For example: I have a struct pointer in C: Quote: DGNElemCore *
.
[StructLayout(LayoutKind.Sequential )]
public class DGNElemCore
{
public int attr_bytes;
public byte[] attr_data;
public int color;
public int complex;
public int deleted;
public int element_id;
public int graphic_group;
public int level;
public int offset;
public int properties;
public int raw_bytes;
public byte[] raw_data;
public int size;
public int style;
public int stype;
public int type;
public int weight;
}
|
|
|
|
|
I have already responded on the thread in the C# forum. You have changed the order of the items in this structure so it will not work.
One of these days I'm going to think of a really clever signature.
|
|
|
|
|
Hi,
I have one dialog box (parent). I have a button on this dialog box. On clicking this button I'll invoke second dialog (child) (modal dialog). Now I want to keep track of an instance in child dialog that it has been invoked second time. I mean to say when I click on the button, this dialog will be Poped Up. Now in any of the functions defined in the child dialog, I want to know that this dialog has been invoked second time and also I want to save the state of any variable defined in the child dialog. for example if I have set a variable as 1 in child dialog, Now when I invoked this dialog second time, I should get the variable's value as 1.
Anybody have any idea regarding this.
Any help will be appreciated.
Regards,
Mbatra
|
|
|
|
|
|
what static......?
what should be kept static, the variable which I declared......
Still then how to check for the dialog invocation for second time.?
Please explain, or help with some sample code.
Regards,
mbatra
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
