|
1. Oh absolutely,
2. you were right, though.
|
|
|
|
|
That was the problem (as Richard also pointed out). Thanks and 5 points!
"Microsoft -- Adding unnecessary complexity to your work since 1987!"
|
|
|
|
|
Is it safe to pass CComVariant declared locally to other function
1. Can I pass the CommVariant to other function, when not created using new ?
2. Should I free it/delete expecitly some where ?
3. Is it safe ? any precauions ?
CComVariant comVart;
comVariant.vt = VT_I4;
comVariant.intVal = 10;
SendComVariantToOtherFunction(comVart);
Thanks in advance!!
|
|
|
|
|
ptr_Electron wrote: 1. Can I pass the CommVariant to other function, when not created using new ?
Yes.
ptr_Electron wrote: 2. Should I free it/delete expecitly some where ?
No, when not allocated on the heap. When using new, it must be of course freed using delete. Everything else is done by the destructor.
ptr_Electron wrote: 3. Is it safe ? any precauions ?
It is safe. But you must take care when assigning data (type and data must match).
|
|
|
|
|
I want ot check CComVariant.boolval is valid and extract bool value from it
if(SUCCEEDED(m_abc->GetProperty("test", comVar)))
{
if (comVar.boolVal == VARIANT_TRUE)
{
}
}
please help!
|
|
|
|
|
It could be that m_abc->GetProperty returns something other than a bool, so you should also check comVar.vt to see that you really have a boolean.
|
|
|
|
|
You must also check the vt member. When expecting a boolean value, it must be VT_BOOL. When the requested property exists but did not contain a value, VT_EMPTY or VT_NULL are returned (the return type depends on the property value type).
|
|
|
|
|
I have craeted following kind of function in a class:
void SetStr(string& s1, string& s2)
{
const char* s =(s1+s2).c_str();
cout<
|
|
|
|
|
The result of an expression is temporary, and it is destroyed an the and of the expression evaluation.
In your first case, you are getting a temporary string as a result of s1+s2, whose buffer pointer is saved in s. After that, the expression finish, the temporary is destroyed, and so it is its buffer and s is left dangling. You had been lucky in having printed nothing. accessing a deleted buffer can even result in a crash.
In your second example, the temporary string resulting from s1+s2 is kept alive until the expression it belongs ( cout<<(s1+s2).c_str()<<endl; ) is evaluated. Hence its buffer (renturned from c_str()) is still there at the time its pointer is given to cout.
Your first sample works correctly if you retain the string:
void SetStr(string& s1, string& s2)
{
string ss;
ss = s1+s2;
const char* s = ss.c_str();
cout << s << endl;
}
2 bugs found.
> recompile ...
65534 bugs found.
modified 22-Feb-12 14:48pm.
|
|
|
|
|
Great answer.
You miss an underscore in your sample code.
--Carlo The Nitpick
Veni, vidi, vici.
|
|
|
|
|
But no applause for this guy standard c_str() problem in C++[^] 
but why do we have two forums on the same subject. Sorry I'm just outta the rock.
Starting to think people post kid pics in their profiles because that was the last time they were cute - Jeremy.
|
|
|
|
|
I'm running a cosmetic loop, and I think I should check to see if the CreateProcess is still running. I've seen other post for the same thing, but could not remember the nomenclature for it.
Just looking for recommendations
I played around with checking the exit code, but I know it's not the proper way to do it
GetExitCodeProcess(pi.hProcess, (unsigned long *)&exit_status);
if (exit_status != 259)
break;
My CreateProcess
if (CreateProcess(sz_SQLServer_Install_FileName, szParameters, NULL, NULL, FALSE, CREATE_DEFAULT_ERROR_MODE | NORMAL_PRIORITY_CLASS, 0, sz_SQLServer_Install_FolderPath, &si, &pi) ) {
while(WAIT_TIMEOUT == WaitForSingleObject(pi.hProcess, 10)) {
MSG oMSG;
while(::PeekMessage(&oMSG, NULL, 0,0, PM_NOREMOVE)) {
if(::GetMessage(&oMSG, NULL, 0,0) ) {
::TranslateMessage(&oMSG);
::DispatchMessage(&oMSG);
}
else {
break;
}
|
|
|
|
|
Hi Jim,
What problems are you having? The call to GetExitCodeProcess looks good to me although not sure why you needed the cast on exit_status.
Also... WaitForSingleObject will return WAIT_OBJECT_0 when the process has exited.
|
|
|
|
|
The original problem that lead to the question was that when the program running in the process was canceled, or halted due to a requirement missing, the cosmetic loop would still be running, instead of exiting and sending the appropriate message to the message pump to go to the next stage. So I added the GetExitCode to double check that the process was still running, or if the process had been halted.
Just didn't think my quick fix was the correct way to check, and just wanted to do it right.
|
|
|
|
|
jkirkerx wrote: The original problem that lead to the question was that when the program running in the process was canceled, or halted due to a requirement missing, the cosmetic loop would still be running, instead of exiting and sending the appropriate message to the message pump to go to the next stage.
I actually have something to say about this. I have noticed over the last few years that many of the younger junior programmers coming out of college are no longer using exit codes. I have noticed this in many of the recent Microsoft products and applications from various other software vendors. I believe it is probably because most of us older engineers have experience with the Unix and DOS shell and have extensively used exit codes in bash,cshrc scripts and/or DOS batch files.
Unfortunately since the installer you are using is not returning an exit code upon cancellation... you may need to think outside the box and come up with a creative way to determine if your installer has completed. I noticed that one of your variable names was associated with Microsoft SQL Server... so maybe you could check the registry keys under the tree: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft SQL Server\
Finally, I would encourage you (and anyone reading this) to think of this experience as a lesson; Exit codes might be useful to someone... rather than always return 0; consider returning a useful value that reflects the outcome of the task.
-Best Wishes,
-David Delaune
|
|
|
|
|
I was considering doing something like that.
Chunk is saying to dump my line of code, and trust the WaitForSingleObject.
I do know the name of the SQL Server installation process, just an idea.
Let me run some more test with and without the cancel after removing the lines, and see what happens again. They take 30 minute each for a full run. Back tomorrow.
|
|
|
|
|
There's nothing wrong with using WaitForSingleObject() on the hProcess returned from CreateProcess(). Its very purpose is to give you a waitable object that's signalled when the process teminates. Until it terminates, the GetExitCodeProcess() cannot tell you the exit code 
Some folks might comment on the fact that your wait loop includes a message pump which implies that you are waiting during processing of a GUI element / button but to each his own. This works.
|
|
|
|
|
Cool.
Well I'm not getting the exit code, but I do get a still active code which is OK for now.
Thanks Chuck.
|
|
|
|
|
That's the defined behavior of GetExitCodeProcess(). The exit code does not exist until the process exits! The defined return is "Still Active", meaning "No exit code exists", or colloquially expressed, "Yo, Dude, What Exit Code? It Ain't Exited Yet".
|
|
|
|
|
If no one has an objection to the GetExitCodeProcess in the loop, I'll stick with it because it works. I just thought it was completely wrong to use, or perhaps I'm just getting better at this.
if (CreateProcess(sz_SQLServer_Install_FileName, szParameters, NULL, NULL, FALSE, CREATE_DEFAULT_ERROR_MODE | NORMAL_PRIORITY_CLASS, 0, sz_SQLServer_Install_FolderPath, &si, &pi) ) {
while(WAIT_TIMEOUT == WaitForSingleObject(pi.hProcess, 10)) {
MSG oMSG;
while(::PeekMessage(&oMSG, NULL, 0,0, PM_NOREMOVE)) {
if(::GetMessage(&oMSG, NULL, 0,0) ) {
::TranslateMessage(&oMSG);
::DispatchMessage(&oMSG);
}
else {
break;
}
if (ndx != 100) {
SendMessage(g_SQLServer_Install_Progress_Bar, PBM_SETPOS, (WPARAM)ndx, 0);
UpdateWindow(g_SQLServer_Install_MDIWindow);
Sleep(100);
++ndx;
}
else {
if( iMO == 0 ) {
SetWindowText(g_SQLServer_Install_Progress_Text, L"Installation may take up to 30 minutes");
iMO = 1;
}
else {
SetWindowText(g_SQLServer_Install_Progress_Text, L"Installing Microsoft SQL Server Express 2008");
iMO = 0;
}
UpdateWindow(g_SQLServer_Install_MDIWindow);
ndx = 0;
}
GetExitCodeProcess(pi.hProcess, (unsigned long *)&exit_status);
if (exit_status != 259)
break;
}
}
GetExitCodeProcess(pi.hProcess, (unsigned long *)&exit_status);
if (exit_status == 0) {
SendMessage(g_SQLServer_Install_MDIWindow, WM_COMMAND, (WPARAM)g_SQLServer_Install_IDC_COMMAND, (LPARAM)g_SQLServer_Install_IDM_COMPLETE );
}
else {
SendMessage(g_SQLServer_Install_MDIWindow, WM_COMMAND, (WPARAM)g_SQLServer_Install_IDC_COMMAND, (LPARAM)g_SQLServer_Install_IDM_CANCEL );
}
CloseHandle(pi.hProcess);
CloseHandle(pi.hThread);
exitCode = 1;
bResult = TRUE;
|
|
|
|
|
Well, the call inside the loop is pretty useless but if it makes you happy...
The sole purpose, as written, is to cause the big while loop to break out if the response is anything but "still running". But the WaitForSingleObject() returning anything other than "WAIT_TIMEOUT" (that is, WAIT_OBJECT_0) also breaks out of the loop (the "else clause") which will happen as soon as the thread stops running (which sets the exit code and signals the hProcess object).
Now, I'll grant you that by having the call at the bottom of the while loop may cause you to notice the process termination a couple of microseconds earlier than if you went to the top of the loop but you counter act that miniscule gain by discarding the status you might have received then and issue another GetExitCodeProcess() immediately upon exiting the while loop.
So, it adds nothing to the code, adds processing at each iteration. But, like I said, if it makes you happy ....
|
|
|
|
|
HA, I just read the documentation on GetExitCodeProcess()[^] (twice to be sure).
If I were a malicious / devious person, I'd write my process to "return 259;" as the exit status. Since GetExitCodeProcess() returns either status STILL_ACTIVE or the return code from the process. If 259 is my exit code, following Microsoft's method for testing the status would be fooled into thinking the process is still running. Does this count as "Amusing Microsoft API Tricks"
Anyway, WaitForSingleObject() on the hProcess object is the only way to be sure.
|
|
|
|
|
Hmm.
So if I just removed my GetExitCode from the loop, I'm good to go?
It's not that I like it.
I'll remove it and run the test again a couple of more times, just to make sure.
Thanks Chuck
|
|
|
|
|
Jim,
I observe that you are passing a variable named sz_SQLServer_Install_FileName to CreateProcess which would obviously imply that you are installing SQL Server. Are you using a MSI installer? According to the documentation... the MsiExec.exe and InstMsi.exe MSI installers will return useful status/error codes.
Error Codes[^]
Best Wishes,
-David Delaune
|
|
|
|
|
I'm running these programs. I think Microsoft wrote the installer.
I just finished running the test, and put the line back in. Can't detect a cancel when I click the red X square during the expansion of the files to the temp dir. With the line, I can detect the click. So I guess the line is useful. I just want to cover my butt, who knows what the user will do.
So I detect the cancel, use the message pump to acknowledge the cancel, messagebox, start the installation again.
WCHAR *szFileName_X86 = L"SQLEXPRADV_x86_ENU.EXE";
WCHAR *szFileName_X64 = L"SQLEXPRADV_x64_ENU.EXE";
|
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
