|
Service/scheduled task on the server that will delete files older than X?
|
|
|
|
|
How about placing the cleanup code in the same area as where the user is allowed to upload his files temporarily.
Something like:
1) User wants to upload file.
2) check for any files that are older than "X" days and delete them
3) Continue with the upload logic
This eliminates the need for creating a separate task that would run as a service or scheduled task.
Just a thought. 
|
|
|
|
|
Hi ,
I have an application that will collect data from user (entering time sheet data)
so the status of Time sheet can be any of the following
1. Open
2. Saved
3. submited
4. Under Review
5. Approvred.
6. Reject
I am displaying a report on this data. Consider a case where user daily saving his time sheet but not submitting.
My report will be like below
Userid Date Status.
111 Date1 Open
111 Date1 Saved
111 Date1 Saved
111 Date2 Saved
111 Date3 Saved
111 Date4 Submitted
111 Date5 Under Review
111 Date6 Under Review
111 Date7 Under Review
111 Date7 Reject
111 Date7 Saved
111 Date7 Saved
111 Date7 submit
:
:
Above are actual events done on the user time sheet . It looks like that duplicate data saved but it is displaying all the events.
My requirement is to delete duplicate records if the current and previous records are having the same status .
I can do his by looping through all the records using "for" by cecking previous and curent satus.
But i want this is to be done in diffrent way, Can anyone suggest if we can use LINQ for this, if so please suggest me.
Thanks,
|
|
|
|
|
You don't need LINQ to do this, and it would really be unsuitable for the task. Plain SQL should do the trick. This[^] article might help.
"Don't confuse experts with facts" - Eric_V
|
|
|
|
|
So you want an explaination as to why this was marked as a bad answer?
The OP asked
salmonraju wrote: Can anyone suggest if we can use LINQ for this
and you reponded
Shameel wrote: You don't need LINQ to do this
The question wasn't whether or not they needed LINQ for this is was IF it were possible to use LINQ. A bad answer since it did not answer the question that was posed.
Shameel wrote: Plain SQL should do the trick.
The OP made no mention of how the data was being stored. Perhaps it was an in-memory datastore, an XML file, a flat file, etc. A bad answer since it made an unjustified assumption rather than ask for clarification.
Now you have your explanation. You will no doubt disagree, that's you up to you.
Now, leave it alone, go way, grow a thicker skin. Everyone else does not need to be subjected to your paranoia and sense of being pursecuted.
I know the language. I've read a book. - _Madmatt
"The OP herself was not sure about her question"
"The OP is from India and I know what she meant." - Shameel
modified on Tuesday, August 23, 2011 9:10 AM
|
|
|
|
|
Mark Nischalke wrote: The question wasn't whether or not they needed LINQ for this is was IF it were possible to use LINQ.
IMO, a good professional is one who provides the best way to complete a task, not just what the OP asks for, and that is what I did. If there is problem with it, let the OP speak out, there's no need for you to keep pestering everyone here.
Mark Nischalke wrote:
The OP made no mention of how the data was being stored. Perhaps it was an in-memory datastore, an XML file, a flat file, etc. A bad answer since it made an unjustified assumption rather than ask for clarification.
To light up your short lived memory, you have a problem with asking for clarification too. Here's an example[^].
So it doesn't matter what I do, you need a reason to downvote me and you see an opportunity to do it in everything I post. I have no problem with it if that gives you satisfaction. Only a minion would do it and you never fail to prove that you are one.
Mark Nischalke wrote: Now, leave it alone, go way, grow a thicker skin. Everyone else does not need to be subjected to your paranoia and sense of being pursecuted.
I did not litter your posts, it's the other way round, you came here uninvited and probably you should go away.
"Don't confuse experts with facts" - Eric_V
|
|
|
|
|
Mark Nischalke wrote: sense of being pursecuted.
It's either:
persecuted: Human english
or
purrsecuted: English transliteration of cat talk (I haven't yet come up with a witty translation of what a cat would try to express by this word)
Cheers!
"With sufficient thrust, pigs fly just fine."
Ross Callon, The Twelve Networking Truths, RFC1925
|
|
|
|
|
You may be able to use linq but since you haven't indicated how or where this data is stored we can't give you a specific answer. With linq you can do joins and self joins that may be sufficient for you.
I know the language. I've read a book. - _Madmatt
"The OP herself was not sure about her question"
"The OP is from India and I know what she meant." - Shameel
|
|
|
|
|
Hello everybody!
I'm working on an asp.net 4 project in which I'm using a jquery plugin for displayig bubble popups on mouse over on certain elements. I started facing a problem with the borders of the plugin not displaying, and now after a while trying to figure what was wrong, I've narrowed the issue to the background images that are set as inline styles on the border elements not being displayed.
I tried somethning more simple like,
<pre lang="HTML"><span style="background-image:url(top-left.jpg);">testing</span></pre>
and voila! doesn't work. It's easier to solve it now i think but it's freaking weird.
The image exists and the span is displayed but no image on the background. I tried an empty HTML file with just that same code
<pre lang="HTML"><html>
<head>
<title>jQuery Bubble Popup - How to make a selectable Bubble Popup when mouse is overy</title>
</head>
<body>
<span style="background-image:url(top-left.jpg);">testing</span>
</body>
</html></pre>
and here the image is displayed! Both pages at the same level and with exactly the same code for the span element, the only diference is that the real page is an aspx and has a lot more content.
Also when i look in Firebug and roll the mouse over the image on the styles panel to the right, the preview of the image is shown for the test file, but when i do it on real page, then it says that it can't find the image.
Any ideas? Any help will be highly appreciated since I've been stuck on this for quite a while.
Thanks so much in advance,
/Kenia
|
|
|
|
|
Agree it's really a weird issue. I think some additional code in your aspx page might blocked this thing.
Try the simple case. Just convert the HTML file into aspx page(Copy the HTML page content & create new aspx page & paste it) & run. Now what's the output...
thatraja
My Tip/Tricks
My Dad had a Heart Attack on this day so don't...
All these are my opinions. Different people. different way of thinking. I am no one to judge others - Chandru
|
|
|
|
|
Hello and thanks for your reply.
I did what you suggested and when i convert the HTML file to .aspx without a master page the image is displayed, however if I use the master page used on the project and inherit from the project template page then the issue comes up again. So I've reposted this on a different forum, 'cause this is actually an EpiServer (http://www.episerver.com/[^]) project, and there's clearly some conflict with something else...but i really have no idea what it might be.
It was a good tip you gave me, thanks!
/Kenia
Kenia
|
|
|
|
|
Sir/Madam Please check out on other browers because some browers does not support the background image.
Thanks
|
|
|
|
|
This really works for me,
<html lang="en">
<head>
<title></title>
</head>
<body>
testing
</body>
</html>
|
|
|
|
|
Try specifying width and height for your span. I had the same problem with a webpage and this worked for me.
Alternatively, you can replace the span with a div and see if it works.
|
|
|
|
|
I'm unable to attach the mdf file i.e,
when i select 'DataBase Files from Create new connection that from the Report creation Wizard'
i'll get an error in the 'Crystal Report ActiveX Designer' window that "failed load database information".
plz do concerned to this problem . . . .
Thanks,
praveen
|
|
|
|
|
praveengb wrote: I'm unable to attach the mdf file i.e,
I do not believe you can directly connect to a SQL Server database file. You need to connect to an instance of SQL Server that has that database already loaded.
Common sense is admitting there is cause and effect and that you can exert some control over what you understand.
|
|
|
|
|
hello friend,
can u give the steps to create the instance and connecting to the crystal report . .
|
|
|
|
|
The following article helps you to create crystal report using database expert.
http://thakkermukund.wordpress.com/2011/08/12/creating-crystal-reports-in-asp-net/
|
|
|
|
|
Check This link,
http://wp.me/phK2W-31
|
|
|
|
|
I am very new to ajax (as in this is my first time trying something in ajax) but here is what I am dealing with. I am working on a db4o web server control client. Once finished, I will hopefully be using this in many other projects. What I have at this point is a connect and disconnect button to open and close the db. My code works flawlessly in Firefox but in IE and Chrome it doesn't. I have traced it to a problem where sometimes my Json value (which is just a bool) comes back as null. I stress sometimes in that for no particular reason it just happens. Sometimes it works. Sometimes it doesn't. But it always works in Firefox. However, I have debugged my server side code and the value is never coming back null. In chrome I see that the request comes back as cancelled. The http response and request regardless of successful or fail are identical other than I noticed that the request content-length varies slightly but it doesn't seem to change . This code is supposed to help me with attacks where someone could mimic my ajax request so it sends a validation token as it's body. If there's a better way then please do tell me. Here is my code.
My Jquery functions
<script type="text/javascript">
$(document).ready(function () {
$.ajaxSetup({
cache: false,
timeout: 5000
});
$("#connectButton").click(function (connect) {
connect.preventDefault();
$.ajax({
type: 'post',
contentType: "application/json; charset=utf-8",
dataType: 'Json',
cache: false,
url: 'DBAdmin/ConnectDbAjax',
data: $('<form>@Html.AntiForgeryToken()</form>').serialize(),
success: function (response) {
if (response) {
$("#disconnectButton").attr("disabled", false);
$("#connectButton").attr("disabled", true);
}
}
});
});
$("#disconnectButton").click(function (disconnect) {
disconnect.preventDefault();
$.ajax({
type: 'post',
contentType: "application/json; charset=utf-8",
dataType: 'Json',
cache: false,
url: 'DBAdmin/DisconnectDbAjax',
data: $('<form>@Html.AntiForgeryToken()</form>').serialize(),
success: function (response) {
if (response) {
$("#connectButton").attr("disabled", false);
$("#disconnectButton").attr("disabled", true);
}
}
});
});
});
</script>
My MVC functions. The validation token code is commented out because I still haven't gotten that to work yet but I think I can tackle that on my own. I am focusing on this issue for now.
[HttpPost]
public JsonResult ConnectDbAjax()
{
StartServer db2 = new StartServer();
bool response = db2.StartServerFunction();
return Json(response);
}
[HttpPost]
public JsonResult DisconnectDbAjax()
{
StopServer stop = new StopServer();
bool discResponse = stop.StopServerFunction();
return Json(discResponse);
}
|
|
|
|
|
For anyone who reads this, the problem was AVG Antivirus. I have been killing myself for almost a week now over this searching google and posting to forums etc. And now finally it's the Antivirus. I want to cry. At least it works. hope this post saves someone else the grief that I went through.
|
|
|
|
|
Good follow-up.
I know the language. I've read a book. - _Madmatt
"The OP herself was not sure about her question"
"The OP is from India and I know what she meant." - Shameel
|
|
|
|
|
Please post an example to show clearly how to maintain session state in ASP.NET using C#
|
|
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
