|
Yes, and I have no problem with it's existence. If you post a stupid question, and that makes you realise just how dumb you have been, then deleting it before anyone notices or answers is fine by me.
But, when it is a complicated answer that can take half an hour to get right, and the OP deletes it as soon as he reads it, that does annoy me, I admit.
If nothing else, it doesn't appear in any list I can access to copy it or refer anyone else to next time...
Real men don't use instructions. They are only the manufacturers opinion on how to put the thing together.
Manfred R. Bihy: "Looks as if OP is learning resistant."
|
|
|
|
|
sorry, not intended to remove. it was a mistake.
- Regards -
J O N
A good thing is a bad thing if it keeps you from the best thing. - Dr. Adrian Rogers
|
|
|
|
|
im using c#.net to create a system, then the problem is i want to connect in online mysql database to store data through internet but i ddnt know how to do it.. there's someone how to do it?.. pls help me.. give some link or sample code.. thnx...
|
|
|
|
|
Assuming the database is on the webserver, just connect to it as if it was your local machine in the codebehind.
using (MySqlConnection con = new MySqlConnection(connectionString))
{
con.Open();
using (MySqlCommand com = new MySqlCommand("SELECT * FROM Customers ORDER BY Year(date), Month(date), Day(date)", con))
{
MySqlDataReader r = com.ExecuteReader();
while (r.Read())
{
}
}
Real men don't use instructions. They are only the manufacturers opinion on how to put the thing together.
Manfred R. Bihy: "Looks as if OP is learning resistant."
|
|
|
|
|
nEar_mO wrote: i want to connect in online mysql database
You want to store data from an app that's running local, in the database of a webhost? Those databases are often behind a firewall, it might not be possible to connect to it directly.
An alternative would be using webservices 
I are Troll 
|
|
|
|
|
how to use web services?...
|
|
|
|
|
|
You'll have to write them. The w3schools[^] website has a good explanation on what it is and how you build them
I are Troll
|
|
|
|
|
|
i wanted to create a system for the server that can manipulate multiple computers through network.. it is possible that the server can manipulate the users computer without a system software for the users?...
|
|
|
|
|
No.
Security concerns prohibit that - as do firewalls, etc., etc.
Real men don't use instructions. They are only the manufacturers opinion on how to put the thing together.
Manfred R. Bihy: "Looks as if OP is learning resistant."
|
|
|
|
|
Hi,
Please help me with this weird problem:
- I have a C# application that works fine from Visual Studio (both Debug & Release).
- Works fine on some client machines.
- But hangs at a point (where a VB DLL is called) on some some machines.
- I was trying to research and made some changes like 'Enable ClickOnce' and removed all references to external dlls and re-built the project again.
. Now it still works from Visual Studio
. but hangs when installed and run from Program Files on my machine as well.
Basically, I was able to reproduce what is happening on some client machines. But I'm lost as to what is making it to wait. And how to fix it. The VB dlls are from legacy applications and I'm referencing them by browsing and copying to local.
I'm using XP, 32bit, Visual Studio 2005.
Thanks!
Ap
|
|
|
|
|
If they are legacy VB DLLs, then they are going to be COM DLLs. Issues that can arise from this is that you need to register the DLL on the client machine (and then you can have other issues relating to permissions, DCOM settings and the likes).
|
|
|
|
|
|
Thank you from your responses.
Ok, here is what I did, and found out, but problem still exists..
I dug into the source code of the dlls which basically have some computations involving heavy mathematical calculations + condition checking (to the precision) and iterating
- something that tries to converge and interpolates...
I made them into .NET dlls re-built them with my project (adding some debug statements & logging some output). Now I see that:
1. When I run it from 'Visual Studio', it calculates well and returns with results.
2. While from 'Program Files', it is running in a infinite loop (which I assume needs an additional check and needs to break - I can fix that!).
But my question is:
- with the same input data, how can the calculated results be different and follow two different paths altogether?
- Does VS use a different math library?
- Now, to me it is a bigger problem. Because users are going to run from 'Program Files' and I'm happy with the VS results??
I'm lost!! Please help!!
|
|
|
|
|
Hi,
I have a program for work that uses a formula to calculate the refurb on a unit(parts replaced on cableboxes that were damaged) divided by total units(cableboxes that went through refurb, but did not have any parts replaced). I looked up casting online, and the format for it is intvaluetoconvert = Convert.toint32; I'm doing that , but still get the error Cannot implicitly convert type 'double to int. An explicit conversion exists(are you missing a cast?) What am I doing wrong? Can someone please help? Thank you.
Justin
Here's some of my code to look at?
private int GetRefurbRate()
{
string sql = "";
double Refurb_Rate;
int totalRefurb = 0;
int totalUnits = 0;
string error_msg = "";
sql = "SELECT COUNT(rp.repair_ord) " +
"FROM " + schema + ".repair_part rp " +
"WHERE rp.repair_ord = '" + repair_ord + "' ";
while (true)
{
if (!myDb.RunSql(sql, true))
{
error_msg = "DBError for getting Refurb Rate";
break;
}
if (myDb.dbRdr.HasRows)
{
if (myDb.dbRdr.Read())
{
try //Try and Catch are here b/c I originally had everything ints, and and they just caught the 0 exception.
{
Refurb_Rate = Convert.ToInt32( totalRefurb / totalUnits * 100); //This is where I try to perform the cast.
}
catch (Exception e)
{
Console.WriteLine(e);
}
}
//int Refurb_Rate = Convert.ToInt32(Refurb_Rate);
}
break;
}
myDb.dbRdr.Close();
if (error_msg != String.Empty)
{
MessageBox.Show(error_msg, "Get Refurb Rate",
MessageBoxButtons.OK, MessageBoxIcon.Asterisk);
}
return Refurb_Rate;
}
|
|
|
|
|
You're returning a double. Try converting that to an Int32.
Justiin1265 wrote: try //Try and Catch are here b/c I originally had everything ints, and and they just caught the 0 exception.
How about "If (totalUnits > 0)", since you're not allowed to divide by nothing?
I are Troll
|
|
|
|
|
That's what I am cofused on. I thought I was inserting the formula into the conversion statement. What is the correct way, b/c the way I am trying to do it gives me an error?
Justin
|
|
|
|
|
You can check whether totalUnits is zero, before attempting a divide;
Refurb_Rate = 0;
if (totalUnits > 0)
Refurb_Rate = Convert.ToInt32( totalRefurb / totalUnits * 100);
You're returning a double, called Refurb_Rate, where the method is expected to return an int, on the last line;
return Convert.ToInt32(Refurb_Rate);
Hope this helps
I are Troll
|
|
|
|
|
|
I know I'm sorry, someone told me about it last time. I poseted this in a rush and forgot.
Justin
|
|
|
|
|
Pro-tip: you can still edit your question to fix it.
This is not the age of reason, this is the age of flummery, and the day of the devious approach. Reason’s gone into the backrooms where it works to devise means by which people can be induced to emote in the desired direction.
|
|
|
|
|
On which line does the compiler show the error? My guess is it goes wrong at
return Refurb_Rate; as the method return type is Int32.
If you were to change the declaration of Refurb_Rate from Double to Int32 then the problem would go away.
I'm not sure what you are trying to do in the line
Refurb_Rate = Convert.ToInt32( totalRefurb / totalUnits * 100);
It doesn't make much sense as the result of the expression on the RHS is already Int32 making the explicit conversion redundant.
Alan.
|
|
|
|
|
it will also result in a zero value most of the time.
Luc Pattyn [Forum Guidelines] [My Articles] Nil Volentibus Arduum
Please use <PRE> tags for code snippets, they preserve indentation, improve readability, and make me actually look at the code.
|
|
|
|
|
It shows the error at Refurb_Rate = Convert.ToInt32( totalRefurb / totalUnits * 100); I'm trying to convert the doulbe back to an integer, so I figured use the conversion syntax to return to an integer.
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
