|
First of all, there isn't as big difference performancewise between those disks as you might think.
The velociraptor has only a slightly higher sustained datarate, and if you would consider the 1.5 TB Caviar, it's even slower.
But the latency is 30% lower.
It's also serverclass when it comes to reliability, which the caviar certainly isn't.
So it's more about how you're going to use the drives that makes the difference.
If you read or write very large contiguous files in one go, the raid system is the clear winner.
But if you read or write very many small files, then the single velociraptor will be the better choice.
Also keep in mind that a cheap raid controller isn't fast. Check the sustained write speed if available.
If you really want a fast system, you should consider one of these[^] instead.
|
|
|
|
|
Does anyone know where I might find application benchmarks for dual socket core i5 2500K versus one and two socket core i7 2600K? Curious about Excel and compiler benchmarks.
Is overclocking effective with dual socket machines with or without liquid cooling? Note that this will be for my personal machine that I will program on at home and not for a server, etc.
|
|
|
|
|
I haven't seen any 2 socket benchmarks yet. Annand did a compiler benchmark with single socket systems.
The catch with overclocking is that in general 2 socket boards are intended for servers and have minimal hardware support (most notably they typically don't have VRMs capable of handling the excess load, or the extra heat it produces) even if it's allowed in the BIOS.
3x12=36
2x12=24
1x12=12
0x12=18
|
|
|
|
|
Thanks. I'll probably go with single socket overclocking 2600K or dual socket 2500 without overclocking if I find a two socket board in the next month.
|
|
|
|
|
I didn't occur to me at the time, but you're not going to find a 2 socket 1155 board because it's not a supported configuration (no QPI to link the chips). On the Intel side you'll have to wait until Q3 for LGA 2011 to launch before you can get multi-socket support for Sandybridge.
3x12=36
2x12=24
1x12=12
0x12=18
|
|
|
|
|
Out of necessity ( I am developing video appliocation and need more than one webcam) - my cheap webcams did not come with driver for win 2000 - I switched to XP (SONY home edition).
I heve an external USB drive which holds all my development archive.
This drive and other USB devices worked and attached to my Windows 2000 via D-link hub and switch box ( I have two dev mashines) just fine and every time (on powerup).
Now I need to restart the XP often before the Disk Manager "registers" the external drive.
I tryed motherboard USB ports ( back and front)and PCI USB (5 ports) card. Same results.
I have these devices on the USB - 4 webcams, external drive,USB hub with serial port adapter( ham radio), scanner, MS wireless keboard / mouse.flash drive. All of them have some intermittent issues.
I guess the qestion is - how to debug USB and find out what is happenning here.
Once I got some message about "bandwith 70% usage" problem but I have no clue what to do with it.
It wants me to "unplug" device which is stupid because if it slows dow I do not care, my apps is bulid with checks for that.
Anyway, could someone kindly shed some light on this USB behavior.
Thanks for reading.
Vaclav
PS All of the devices worked on Win 2000, some of them are powered, it cannot be a power issue.
|
|
|
|
|
XP changed the way drives load in order to speed up the boot process. Now, you get a GUI up in about 4 seconds, thats completely useless for 26 seconds because none of the HW is attached yet, and explorer is locked waiting for the network to connect.
This is clearly an improvement over 2k, where you just waited 30 seconds for the GUI to come up...
Anyway, USB, where to start... OK, it sucks. Its the lamest, buggiest, lest observed standardwise, most indifferently supported at hub level protocol ever seen.
Advice? For gods sake dont use Vista, its worse. As for XP, what does device manager say when the USB drive has not been recognised?
"It is a remarkable fact that despite the worldwide expenditure of perhaps US$50 billion since 1990, and the efforts of tens of thousands of scientists worldwide, no human climate signal has yet been detected that is distinct from natural variation."
Bob Carter, Research Professor of Geology, James Cook University, Townsville
|
|
|
|
|
Thanks for reply.
I foolishly though it was only XP SP3 problem!
And it is not only on startup!
In addition of "ignoring" USB hub at statup I have also observed that unplugging / plugging directly connected ( not via D link) devices is also ignored by XP.
I needed to switch to XP so I can use Logitech webcams, no other reason.
The biggest problem is that I have wireless keyboard / mouse also connected via the D-link hub!
For all practical purposes my USB is useless in XP.
My personal opinion - MS is in hardware development business and should stay there.
I always say the reason that CD was "invented" was because it was impractical to load Windows using two dozen 3 1/2 floppies!
They obviously have no business in operating system development since they cannot get it together after all these years.
Too bad general public does not see that.
If Windows 2011 will make coffee they will all line up for it!
Vaclav
PS I'll check the Device Manager next time.
|
|
|
|
|
Yeah, check device manager. You will see a great big yellow exclamaitn mark on the fialed device.
Also, how does the HW work on other laptops? Becauae god knows USB host controllers can be very VERY variable in quality so dont blame MS, they just make the OS, its someone else made the HW...
"It is a remarkable fact that despite the worldwide expenditure of perhaps US$50 billion since 1990, and the efforts of tens of thousands of scientists worldwide, no human climate signal has yet been detected that is distinct from natural variation."
Bob Carter, Research Professor of Geology, James Cook University, Townsville
|
|
|
|
|
I've got a Dell laptop that has developed an odd problem. As I type, about halfway through a sentence I look up and realize that the cursor has jumped backwards several words, and the characters I'm typing are appearing in the middle of other words earlier in the line. It's completely random, and is not associated with any particular key. The backwards leap always stays within the same line of the display, as well; it doesn't VT to a previous line. It's as if the keyboard is generating a random CR withut the LF, except that it doesn't back up all the way to the left side of the line. It more often is a few characters in from the left side.
I have another identical laptop which is thoroughly dead, but before I go to the effort of trying to swap keyboards I thought I'd ask... Is this likely to be just a keyboard problem, or is it probable that this is something more insidious?
Will Rogers never met me.
|
|
|
|
|
Any chance you are (nearly) touching the touchpad/trackpad while typing? happens to me on occasion.
Staying in the same line is odd. Does it happen in multiple applications? If yes, write a little test app that logs all the keyboard [ADDED] and mouse [/ADDED] events, and match them up with your actual typing.
[ADDED] If need be, you can change the touchpad's sensitivity through the Mouse Control Panel. [/ADDED]
Luc Pattyn [Forum Guidelines] [Why QA sucks] [My Articles] Nil Volentibus Arduum
Please use <PRE> tags for code snippets, they preserve indentation, improve readability, and make me actually look at the code. modified on Thursday, December 16, 2010 7:28 PM
|
|
|
|
|
Luc Pattyn wrote: Any chance you are (nearly) touching the touchpad/trackpad while typing
None. After I noticed this happening, I took some time to experiment, typing very slowly and carefully with just one finger.
Luc Pattyn wrote: write a little test app that logs all the keyboard [ADDED] and mouse [/ADDED] events, and match them up with your actual typing.
That's a good thought... I'll give that a try next week. 
Will Rogers never met me.
|
|
|
|
|
I'm with Luc on this one. Every time I've experienced what you are describing, it's due to a stray finger touching the friggin' touch pad while typing.
CQ de W5ALT
Walt Fair, Jr., P. E.
Comport Computing
Specializing in Technical Engineering Software
|
|
|
|
|
See above. There's no chance of any accidental contact causing this. But the laptop was available - cheap - on eBay. Now I know why.
Will Rogers never met me.
|
|
|
|
|
OK, well, I recall that one other time I had some weird stuff going on, was when my ham radio interfered with the laptop. Isolating the cables took care of that. But in your case, I have no idea how to check and see if something like that is going on.
On the other hand, maybe you should just leave it as is. You could have a competition with DD on Fridays and if you ever do tyupe somtging spullid wrong, you have the perfect alibi.  
CQ de W5ALT
Walt Fair, Jr., P. E.
Comport Computing
Specializing in Technical Engineering Software
|
|
|
|
|
No, nothing weird going on around me at the time. Just a boring hotel room.
I wonder what DD would be willing to pay for an alibi? I have a laptop available that would certainly do the trick.
I need no alibi, as my drunken maunderings are always perfectly intelligible, if not particularly interesting. 
Will Rogers never met me.
|
|
|
|
|
Another idea: do you have anything else installed that can act as an input device? a bar code reader, a second keyboard, a gaming console, some kind of bluetooth device, ...? if so, disconnect all of them, and try again.
And finally: are you amidst strong electromagnetic fields, say in the middle of a power plant?
|
|
|
|
|
Good idea, but there's nothing else connected, and the laptop is old enough to be missing all its blue teeth. Oddly enough, I wasn't in a power plant at the time, but rather in my hotel room in Phoenix. Perhaps I should have worn my tinfoil hat! 
By the way, is there a ANY_MOUSE_EVENT | ANY_KEYBOARD_EVENT I can capture, rather than writing a couple hundred separate event handlers?
Will Rogers never met me.
|
|
|
|
|
No, there are no ANY_XXX_EVENTs. Just have a Form, and handle at least the following: MouseMove, MouseDown, MouseUp, KeyDown, KeyUp.
They can all call the same logging method which just needs one string parameter holding the caller's name and the coordinates or keycode.
|
|
|
|
|
Form events will only help if hte wierdness happens when doing testing in the form. Global system hooks will capture input from anywhere in the OS. Even better, someone has already written an app to collect from them. 
Global System Hooks in .NET[^]
3x12=36
2x12=24
1x12=12
0x12=18
|
|
|
|
|
You're right, but that is taking all the fun away.
|
|
|
|
|
Roger, grab hold of a Live Linux CD and boot (not install) from that. If the problem continues then hardware fault is likely, this way you have eliminated the probability of Windows misbehaving.
modified 1-Aug-19 21:02pm.
|
|
|
|
|
Here's my situation. I have an ASUS laptop that has 3 USB ports. I put my Vbox2 adapter on one directly since I use that to make the laptop essentially be the TV for my Xbox playing the Rock Band video game (I have to use a direct port since the calibration is so important for this game.) I then have one port that goes through an unpowered USB hub to run all my devices, like a powered drive, a MagicJack (i.e., telephone dongle), interface with a Walkman, etc.
I'd also like to run the portable drive through this hub as well. Now this portable drive is unpowered (i.e., it gets its power through the USB port.) However, it seems that whenever I try to plug it into the hub, the drive makes an unnerving clicking sound at a frequency of about 1 Hz, and is not recognized by the Windows 7 OS. However, if I use the remaining USB port on the laptop, there is no clicking sound, and the drive works fine.
OK, so for now, it's not a problem as I only have this one portable drive, and I can use the third USB port of the laptop. However, as I am getting close to filling up my 1 TB drive (don't you just love Torrent and Rapidshare? ), I will be buying new portable hard drive soon. And as I am now at a stage of life where I myself need to be very portable (I am away from my home, and thus do not have my usual car), I must have this new drive as a portable drive.
So, it seems that the problem is either that the portable drive needs to have its own USB port for the purpose of the USB port itself, or because it needs to have the full power of the port. I would hope that the latter is the case, and that a powered USB hub would work as it would supply the full power to any device. Does this sound accurate? What other remedies might I try? Thanks
|
|
|
|
|
yes it is a power issue. I own a CD/DVD that has dual USB cables and plugs just for power's sake; plugging that into an unpowered USB hub wouldn't work either obviously. So use a direct USB port or add external power to the USB hub.
Did you read the documentation on the disk? it really should be in there.
|
|
|
|
|
A USB port can only supply 500 milliamps of power to EVERYTHING plugged into it. If your USB hub is unpowered, you're exceeding the 500 milliamp limit.
Either plug the drive into a powered USB hub or plug it directly into it's own port on the laptop. IMHO, unpowered USB hubs are complete waste of time.
|
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
