|
Hi,
I am building a simple windows phone 7 app. I need to pass more that one data item between pages. I know you need to make a small change to sending one data item across but im not sure what this change is. Currently I send one item across like this:
phoneApplicationPage.NavigationService.Navigate(new Uri("/Pages/View_Stickies.xaml?string=" + info, UriKind.RelativeOrAbsolute));
Where in this case info is the string sent.
I unpack it on page 2 like this:
protected override void OnNavigatedTo(System.Windows.Navigation.NavigationEventArgs e)
{
if (this.NavigationContext.QueryString.ContainsKey("string"))
{
string GPS = this.NavigationContext.QueryString["string"];
MessageBox.Show(GPS);
}
base.OnNavigatedTo(e);
}
Im sure there is a very simple answer to the question and any help would be great.
Thanks
|
|
|
|
|
As you are passing a query string across, all you need to do is add the second key value pair after a &, so your example could become:
string.Format("/Pages/View_Stickies.xaml?string={0}&id={1}", info, id)
|
|
|
|
|
|
|
Hi ,
I have array and I am try to read as a block where block start from 55 55 and end with 204 204 and within the start and the end I am read message where each message should start with 99 and end with 13 (all as a Hex) and if the message length is 30 I will do operation and if it is 6 I will do another operation.
but I am receive some exceptions when I read different bytes from different bytes.
Here's a sample from different blocks ( Which Stored In arraylist called :VopMessageDetails)
55 55 1C 09 0A 0B
99 1E 3F 41 56 42 30 31 31 30 31 31 4E 4E 20 20 30 31 30 20 20 20 20 01 08 42 0B 59 CF 0D
99 1E 3F 41 56 42 30 32 31 30 31 32 4E 4E 20 20 30 32 30 20 20 20 31 02 08 93 0D D3 CE 0D
99 0A 41 2F 01 08 E7 03 00 0D
99 1E 3F 41 56 43 30 33 31 30 31 32 4E 4E 20 20 30 33 30 20 20 20 20 03 08 58 0F 98 CE 0D
99 1E 3F 41 56 41 31 35 31 30 31 32 4E 4E 20 20 31 35 30 20 20 20 20 04 08 00 00 00 00 0D
CC CC
==============================================
55 55 1C 09 0A 0C
CC CC
============================================
55 55 1C 09 0A 0D
55 55 1B 0B 0A 17 99 1E 3F 48 56 41 30 35 31 30
32 36 4E 4E 20 20 30 35 30 20 20 20 20 01 00 32
1E F4 D5 0D CC CC 55 55 1B 0B 0B 04 CC CC
99 0A 41 2F 02 08 78 03 00 0D
CC CC
===========================================
55 55 1C 09 0A 0E
99 1E 3F 41 56 41 31 33 31 30 31 35 4E 4E 20 20 31 33 30 20 20 20 20 01 08 A0 0B F7 DB 0D
99 0A 41 2F 01 08 E7 03 00 0D
99 1E 3F 41 56 42 30 31 31 30 31 35 4E 4E 20 20 30 31 30 20 20 20 20 02 08 42 0B 59 CF 0D
99 0A 41 2F 02 08 E7 03 00 0D
99 1E 3F 41 56 43 30 33 31 30 31 35 4E 4E 20 20 30 33 30 20 20 20 20 03 08 58 0F 98 CE 0D
99 0A 41 2F 03 08 E7 03 00 0D
99 1E 3F 41 56 41 30 34 31 30 31 35 4E 4E 20 20 30 34 30 20 20 20 20 04 08 DB 10 C5 CE 0D
99 0A 41 2F 04 08 E7 03 00 0D
CC CC
================================
55 55 16 0C 0D 2B 99 1E 3F 41 56 41 30 36 31 33
34 33 4E 4E 20 20 30 36 30 20 20 20 20 01 08 C8
11 4E D2 0D 99 1E 3F 48 56 41 30 31 31 33 34 34
59 59 53 34 30 34 30 43 4C 59 36 01 00 0E 1F 2C
DA 0D 99 1E 3F 42 56 41 31 33 31 33 34 35 4E 4E
20 20 31 33 30 20 20 20 20 01 0A D4 0E 48 DE 0D
CC CC 55 55 16 0C 0E 13 99 1E 3F 41 56 41 30 33
31 34 31 39 4E 4E 20 20 31 33 30 20 20 4E 20 01
08 92 0C 64 D4 0D 99 1E 3F 41 56 41 30 38 31 34
31 39 4E 4E 20 20 30 38 30 20 20 20 20 02 08 90
11 EA D6 0D CC CC
|
|
|
|
|
<br />
#region 1: Count Numbers of blocks.<br />
int blockCounter = 0;<br />
int countNumberOfBytes = 0;<br />
for (int i = 0; i < VopMessageDetails.Count; i++)<br />
{<br />
if (VopMessageDetails[countNumberOfBytes].ToString() == "85")<br />
{<br />
<br />
}<br />
else if (VopMessageDetails[countNumberOfBytes].ToString() == "204" & VopMessageDetails[countNumberOfBytes - 1].ToString() == "204")<br />
{<br />
blockCounter++;<br />
}<br />
countNumberOfBytes++;<br />
<br />
}<br />
Console.WriteLine(blockCounter);<br />
#endregion<br />
<br />
<br />
<br />
<br />
<br />
List<string>[] catchBlockBytes = new List<string>[blockCounter];<br />
blockCounter = 0;<br />
catchBlockBytes[blockCounter] = new List<string>();<br />
<br />
int PrevBlockCounter = 0;<br />
<br />
for (int k = 0; k < VopMessageDetails.Count; k++)<br />
{<br />
if (VopMessageDetails[0 + PrevBlockCounter].ToString() == "85" & VopMessageDetails[1 + PrevBlockCounter].ToString() == "85")<br />
{<br />
if (VopMessageDetails[k].ToString() != "204")<br />
{<br />
catchBlockBytes[blockCounter].Add(VopMessageDetails[k].ToString());<br />
}<br />
else<br />
{<br />
PrevBlockCounter = k + 2;<br />
k++;<br />
<br />
if (VopMessageDetails[PrevBlockCounter - 1].ToString() == "204" & VopMessageDetails[PrevBlockCounter - 2].ToString() == "204")<br />
{<br />
blockCounter++;<br />
}<br />
<br />
<br />
if (k != VopMessageDetails.Count - 1)<br />
{<br />
catchBlockBytes[blockCounter] = new List<string>(); <br />
}<br />
<br />
}<br />
}<br />
<br />
<br />
|
|
|
|
|
Why are you converting byte values to strings to test for numeric equality? Just test against the decimal or hex value.
And please use <pre></pre> tags not <code></code> to surround your code blocks; that is why the button is called "code block".
Just say 'NO' to evaluated arguments for diadic functions! Ash
|
|
|
|
|
Hi,
your code is hard to read, you should use PRE tags instead of CODE tags, as that would preserve formatting and indentation.
You also should HTML-escape the < and > and & signs, possibly using the widgets the edit page offers. That way the generic lists would show properly. You could still edit and improve the existing message.
Here are some comments:
1.
When the data is numeric, it is just silly to convert it to string for comparison purposes. You really should be using something like
if (myIntOrMyByte==0x55)...
and not mix decimal and hexadecimal all the time. C# knows about hex literals!
2.
Is this an official standard you're implementing? I'm not familiar with double 0x55 and double 0xCC as special markers. And what makes one so sure they will never appear in the data?
3.
If you're getting exceptions, you should watch the stack traceback; for a debug build it holds class names, file names *and* line numbers, pointing to the exact line that bombs. And if you can't figure it out, show the exact exception message and indicate the line where it happens.
|
|
|
|
|
What exceptions are you receiving? If you could elaborate it may help get the root of the problem.
"Simplicity carried to the extreme becomes elegance."
-Jon Franklin
|
|
|
|
|
when I have block start with 55 55 but not content any message and end with with 204 204
like this
55 55 1C 09 0A 0C
CC CC
and like those
55 55 1B 0B 0A 17 99 1E 3F 48 56 41 30 35 31 30
32 36 4E 4E 20 20 30 35 30 20 20 20 20 01 00 32
1E F4 D5 0D CC CC 55 55 1B 0B 0B 04 CC CC
99 0A 41 2F 02 08 78 03 00 0D
CC CC
|
|
|
|
|
Yes that's fine.
But what error message or exception do you get?
Or do you not get an error where you expected one?
If you won't help us, we can't help you.
What is the error?
Henry Minute
Do not read medical books! You could die of a misprint. - Mark Twain
Girl: (staring) "Why do you need an icy cucumber?"
“I want to report a fraud. The government is lying to us all.”
|
|
|
|
|
Let me get this straight, because I think there are language barriers here. In reference to your example data... a 'BLOCK' is considered everything between 0x55 and 0xCC right? If this is the case, then a couple of your example data sets have multiple blocks. Luc is right in his previous post that data has to escape the fencepost identifiers if they appear inside the payload. And the issue is that your dividing into BLOCKS is not working as expected? No exceptions, just not valid results, ya?
"Simplicity carried to the extreme becomes elegance."
-Jon Franklin
|
|
|
|
|
1) The first 'for' loop does not use its indexer. You can easily change the 'for' loop to a 'foreach' loop and iterate through the bytes. This will simplify your code a little.
2) Do comparisons of bytes, don't convert to strings.
3) If you're working in hex numbers use hex numbers throughout your code, don't mix up number bases. This will make your code easier to understand.
4) Your logical comparisons should use the logical && operator and not the & operator. The & operator returns a bitwise operation resulting in a number, not true or false. They are VERY different.
5) You should always put magic numbers in your code as constants.
public const Byte StartDelimiter = 0x55;
You should never sprinkle those into code manually, you run a huge risk if you are forced to refactor your work. Not to mention that you may mistype one.
6) I would avoid doing tricks with your loop variable like incrementing/decrementing it inside your loop block unless it is absolutely necessary - which should be never.
7) Match your braces. Just because you don't necessarily have to put them in after an 'if' statement doesn't mean you shouldn't. IMHO.
8) Do yourself a favor and look up the State Machine design pattern, it works very well for these kinds of problems.
9) When I ran your program (with healthy fixups) I found that you presumed that every 0xCC,0xCC was an end delimiter. This, apparently, is a false presumption. CCCC appears in your third dataset as valid information, and should not be treated as a fencepost delimiter. fix that up and I think you should get valid results, or at least get you further along.
Regards,
"Simplicity carried to the extreme becomes elegance."
-Jon Franklin
|
|
|
|
|
This is one of the best, and most thorough answers I have ever read, and I agree with every bit of it. I even learned a bit. Thanks! 
Will Rogers never met me.
|
|
|
|
|
Hi ,
Is there a way to change the table name of a datatable in a dataset or create a new dataset and copy the table with a new name in to the new dataset?
Jack Sparrow
--------------------------------------
Defeat is not the worst of failures. Not to have tried is the true failure.
|
|
|
|
|
Use below code and next time try to use Google
dataset.Tables[0].TableName = "MyTable1";
dataset.Tables[1].TableName = "MyTable2";
or do it in loop
for (int i = 0; i <= dataset.Tables.Count; i++)
{
dataset.Tables[i].TableName = "MyTable" + i.ToString();
}
|
|
|
|
|
Thanks mate, really not sure how I missed this...
Jack Sparrow
--------------------------------------
Defeat is not the worst of failures. Not to have tried is the true failure.
|
|
|
|
|
you are welcome
|
|
|
|
|
Here is the error:
System.Data.SqlClient.SqlException: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
I receive this after ~32 seconds of running a SqlCommand. Now, normally the default timeout is 30 seconds, but I have increased this up to 10 minutes and still the timeout happens in 30 seconds. The connection string says Timeout=600 and I do not override this anywhere in the code. In fact, I can print the timeout prior to running the query and it says 600.
Am I missing something obvious here?
|
|
|
|
|
There are two different time outs for SQLConnection and SQLCommand.
Set longer timeout to the SqlCommand object (30 is default).
I hope if this helps
|
|
|
|
|
Also,
While declaring the command object set the timeout property 0 i.e. infinity.
SqlCommand cmd = new SqlCommand();
cmd.CommandTimeout=0;
Try this!
|
|
|
|
|
Very clever that you reply twice so I can give you two 5's 
Answer is very much appreciated (with small modification)!
SqlCommand cmd = new SqlCommand();
cmd.CommandTimeout=con.ConnectionTimeout;
Now I can still modify the timeout just from the config file's connection string.
|
|
|
|
|
yes, dats better to keep config in scene!
i was in hurry to head towards home, so just didnt modify and took a new message post instead
|
|
|
|
|
You're setting the timeout on the CONNECTION attempt, not the query execution timeout. You do that in the SqlCommand object you're using to execute your query.
|
|
|
|
|
We have an ASP.NET 3.5 site that uses themes and skins for handling css and images. Now we are about to create a new site that should have a common look and feel and I like to share the App_Themes between the sites so that they always will have the same look.
Anyone that have any experience in this topic?
_____________________________
...and justice for all
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
