|
Hi all.
How I can read & write from a HID device (like HID tokens) using it's port?
I spent much time to communicate data with HID tokens in DOS program but ... ? 
Thanks.
|
|
|
|
|
Hello people,
When some read only files are moved from a read only folder to another folder that is not read only, they must automajically become writable.Any tip/trick available for this?
I have many many files that I have to selectively move and change, in sequence, and I don't think using a batch file to achieve what I want every time is going to be any helpful. Or is that my only choice?
Thanks for reading this.
|
|
|
|
|
First of all I welcome myself to this forum for visiting it for the first time. 
And before I answer this question, let me tell you how I got here. I saw this post in Lounge and thought of replying but then got into some work. Now when I was searching for it I couldn't find it and I had to go through your profile to arrive here.
Okay, lets get to the question now.
I am no expert in OS. But a simple solution would be to apply a required attribute to the root folder. When you click apply, select the option - 'Apply changes to this folder, subfolder and file' and select Ok.
But I think you do not want to mess with the attributes of already existing sub-folders and files. So here a programming solution that comes to my mind. Write a program which sets the attribute of recently modified files to a desired value.
You can easily do that in C#. The System.IO[^] namespace contains a lot of classes like Directory, DirectoryInfo, File, FileInfo which helps you do these things.
This example shows how to set an attribute to a file: File Attributes [C#][^]
IIRC, you are a C++ guy. You may search Google for C++ solution if you are not comfortable programming C#.
I hope the post at least gives you an idea on how it can be done. All the best! 
..Go Green..
|
|
|
|
|
I too thought about a programmatical solution, but in C++ (you recalled it correctly). I need to to this quite a lot these days (files include documents, code etc) so I was thinking of an elaborate method where some kind of shell hook is installed that does these kinds of stuff. If time permits, I might give it a shot, but before that wanted to see if any poweruser knew any trick.
Thanks a lot for your time.
|
|
|
|
|
AFAIK you have to take care of the read-only attribute explicitly, if you want to make sure it gets cleared.
you didn't tell us *how* you command the file copy.
if by batch file, add an ATTRIB command.
if by .NET code, add a File.Attribute=... statement.
if interactively (Windows Explorer), right click for File Properties.
|
|
|
|
|
Luc Pattyn wrote: AFAIK you have to take care of the read-only attribute explicitly, if you want to make sure it gets cleared.
Thats what I was afraid of. Wouldn't it have been cool for the OS to have given such a option that I need.
Luc Pattyn wrote: you didn't tell us *how* you command the file copy.
Aah, these days "batch" files don't just mean good old .bat files, do they? I was talking about the DOS batch file with ATTRIB.
|
|
|
|
|
I just discovered XCOPY clears the read-only attribute according to its help...
|
|
|
|
|
Hi all.
I develop a bootloader and in stage2 of it, I want to get a key from a usb token that attached to the system? How I can do this?
Please help me if you can.
Thanks.
|
|
|
|
|
Hi, have a good day
What the name of Microsoft Exam that can teach me how to :
1) Install Windows Server 200X ... etc
2) do the Raid , Mirror things ,
3) Create Active Directory Domain Controller ,
4) Associated Clients to my domain and configure policy
5) Some DNS and DHCP , configurations
6) Child Node Servers ( Optional )
Thank you in advance
I know nothing , I know nothing ...
|
|
|
|
|
Stark DaFixzer wrote: I know nothing , I know nothing ...
Ain't that the truth! How many more times do you need to have this[^] done for you?
Just say 'NO' to evaluated arguments for diadic functions! Ash
|
|
|
|
|
... and there's always LMGTFY[^] for those who prefrer a more hands free approach... ?
|
|
|
|
|
Managing and Maintaining a Windows Server 2003 Environment
Exam 70-290
Implementing, Managing, and Maintaining a Windows Server 2003 Network Infrastructure
Exam 70-291
Planning and Maintaining a Windows Server 2003 Network Infrastructure
Exam 70-293
Planning, Implementing, and Maintaining a Windows Server 2003 Active Directory Infrastructure
Exam 70-294
For more information refer
http://www.microsoft.com/learning/en/us/certification/mcse.aspx#tab2[^]
|
|
|
|
|
Go to microsoft website and search for MCSE, you will get better information.
|
|
|
|
|
hi, does windows xp professional support 48bit color depth?
|
|
|
|
|
It's depend upon which Version of XP you use. Navigate the given link to get full details
Link[^]
Hope, it will works for you.
modified on Wednesday, December 15, 2010 7:50 AM
|
|
|
|
|
the OP is asking about pixel data, not about disk sector numbers and addresses.
|
|
|
|
|
Luc Pattyn wrote: the OP is asking about pixel data, not about disk sector numbers and addresses.
Oh its my fault
|
|
|
|
|
Good you realise that, Take it easy
|
|
|
|
|
AshishKr wrote: Good you realise that, Take it easy
Ok I will 
|
|
|
|
|
panda-kh wrote: hi, does windows xp professional support 48bit color depth?
Depends on the driver of the graphics card. Mine doesn't
I are Troll 
|
|
|
|
|
ok, i will check the driver of the graphic card.
|
|
|
|
|
Well I've never used CodeProject for anything other than C# related questions.. so here it goes:
For exercise.. I am trying to create a secure VPN tunnel between this Cisco 1841 Router and a Sonicwall router. No in both routers it shows that the tunnel is active. The problem is I cannot ping / access any computers between the LANs. On the Sonicwall side I have a computer at 192.168.1.250. While on the Cisco side I have a computer at 192.168.11.55. I can not reach either one of them.. evn though the tunnel is active:
inbound esp sas:
spi: 0xD1BC1B8E(3518765966)
transform: esp-256-aes esp-sha-hmac ,
in use settings ={Tunnel, }
conn id: 3003, flow_id: FPGA:3, crypto map: vpn
sa timing: remaining key lifetime (k/sec): (4541007/2298)
IV size: 16 bytes
replay detection support: Y
Status: ACTIVE
outbound esp sas:
spi: 0xAE589C1E(2925042718)
transform: esp-256-aes esp-sha-hmac ,
in use settings ={Tunnel, }
conn id: 3004, flow_id: FPGA:4, crypto map: vpn
sa timing: remaining key lifetime (k/sec): (4541027/2297)
IV size: 16 bytes
replay detection support: Y
Status: ACTIVE
Current configuration : 3972 bytes
!
version 12.4
no service pad
service tcp-keepalives-in
service tcp-keepalives-out
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname CompsysRouter
!
boot-start-marker
boot-end-marker
!
enable secret *****************
enable password ***********
!
aaa new-model
!
!
!
aaa session-id common
ip cef
!
!
!
!
no ip domain lookup
ip domain name ********.local
ip inspect name myfw http timeout 3600
ip inspect name myfw tcp timeout 3600
ip inspect name myfw udp timeout 3600
ip inspect name myfw dns timeout 3600
ip auth-proxy max-nodata-conns 3
ip admission max-nodata-conns 3
!
!
crypto pki trustpoint TP-self-signed-1821875492
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-1821875492
revocation-check none
rsakeypair TP-self-signed-1821875492
!
!
crypto pki certificate chain TP-self-signed-1821875492
certificate self-signed 01
30820245 308201AE A0030201 02020101 300D0609 2A864886 F70D0101 04050030
31312F30 2D060355 04031326 494F532D 53656C66 2D536967 6E65642D 43657274
69666963 6174652D 31383231 38373534 3932301E 170D3130 31323130 32333433
35325A17 0D323030 31303130 30303030 305A3031 312F302D 06035504 03132649
4F532D53 656C662D 5369676E 65642D43 65727469 66696361 74652D31 38323138
37353439 3230819F 300D0609 2A864886 F70D0101 01050003 818D0030 81890281
8100CC57 E44AB177 3594C4C7 E88B1A4F CE4FD392 87CDB75C 2A6A6B1A 87D10791
0134F1FC 54A84BB6 08A40213 35B9DD0A FD813D2F 1C778D01 3F8EBEB0 C4793850
F52F7906 FDBC56A5 A4829AC5 4180DDA7 F54E3AAD DD1D4537 F1F19F11 9AE8A8A0
91C98934 233CF608 1447DA83 41B09E55 4A0FF674 8D060945 07D3F3F9 8EA7B412
5FD30203 010001A3 6D306B30 0F060355 1D130101 FF040530 030101FF 30180603
551D1104 11300F82 0D436F6D 70737973 526F7574 6572301F 0603551D 23041830
168014DC A9938F71 7CCF0E6D 8BC5DFA5 033DD7E4 0F605130 1D060355 1D0E0416
0414DCA9 938F717C CF0E6D8B C5DFA503 3DD7E40F 6051300D 06092A86 4886F70D
01010405 00038181 00148C2F AA7CA155 463B56F2 324FE1ED 3682E618 75E3048F
93E1EA61 3305767A FA93567B AA93B107 83A2F3D6 8F773779 E6BF0204 DC71879A
5F7FC07F 627D8444 48781289 7F8DC06A BC9057B1 4C72AE1F B64284BE 94C6059C
7B6B8A5D 83375B86 3054C760 961E8763 91767604 5E0E0CE3 3736133A E51ACF26
14F3C7C5 60E08BE3 88
quit
username jdixon secret 5 $*****************
!
!
ip ssh time-out 60
ip ssh authentication-retries 2
!
!
crypto isakmp policy 1
encr aes 256
authentication pre-share
group 2
lifetime 28800
crypto isakmp key <SHAREDKEY> address <REMOTE ROUTER>
!
!
crypto ipsec transform-set compsys esp-aes 256 esp-sha-hmac
!
crypto map vpn 10 ipsec-isakmp
set peer <REMOTE ROUTER>
set transform-set compsys
match address 101
!
!
!
interface FastEthernet0/0
ip address "LOCAL ROUTER OUTSIDE" 255.255.255.248
ip access-group Inbound in
ip nat outside
ip inspect myfw out
ip virtual-reassembly
duplex auto
speed auto
no keepalive
crypto map vpn
!
interface FastEthernet0/1
ip address 192.168.11.1 255.255.255.0
ip nat inside
ip virtual-reassembly
duplex auto
speed auto
!
ip forward-protocol nd
ip route 0.0.0.0 0.0.0.0 <OUTSIDE GATEWAY>
!
!
ip http server
ip http authentication local
ip http secure-server
ip nat inside source list 1 interface FastEthernet0/0 overload
ip nat inside source static tcp 192.168.11.55 3389 interface FastEthernet0/0 9999
!
ip access-list extended Inbound
permit icmp any any
permit gre host "REMOTE ROUTER" host "LOCAL ROUTER"
permit esp host "REMOTE ROUTER" host "LOCAL ROUTER"
permit udp host "REMOTE ROUTER" host "LOCAL ROUTER" eq isakmp
permit ahp host "REMOTE ROUTER" host "LOCAL ROUTER"
permit udp host "REMOTE ROUTER" host "LOCAL ROUTER" eq non500-isakmp
permit ip host "REMOTE ROUTER" any
permit tcp any host "LOCAL ROUTER" eq 22
!
access-list 1 permit 192.168.11.0 0.0.0.255
access-list 101 permit ip 192.168.11.0 0.0.0.255 192.168.1.0 0.0.0.255
!
!
!
!
control-plane
!
!
!
line con 0
line aux 0
line vty 0 4
!
scheduler allocate 20000 1000
end
So what am I missing? I started setting up this router two days ago for learning Cisco / routing. From tutorials I have followed, I have everythign setup correctly but traffic just isn't flowing!
modified on Saturday, December 11, 2010 4:54 PM
|
|
|
|
|
Someone from Cisco forms helped me:
access-list 150 deny ip 192.168.11.0 0.0.0.255 192.168.1.0 0.0.0.255
access-list 150 permit ip 192.168.11.0 0.0.0.255 any
ip nat inside source list 150 interface fastethernet0/0 overload
no ip nat inside source list 1 interface fastethernet0/0 overload
|
|
|
|
|
Here is my scenario:
1) A login session running some interactive displays on Windows XP Pro.
2) A remote desktop connection connects to XP via RDP. It takes over the control. When the job done, it closes the connection.
3) When the connection closes, I want to restore the previous login session automatically.
How do I acheive step #3. I've tried TSCON command, but it gives some error. I tried using one account only or using two accounts.
Best,
Jun
|
|
|
|
|
You can login as console using the /console switch on older RDP or /admin on new RDP (vista, win7, 2008 , etc). Will connect you to same one each time
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
