|
RajeevBhatt wrote: Winforms Vs ASP.NET
Winforms does not really qualify as thin client, and will require setup and deployment. This increases the cost of operations.
RajeevBhatt wrote: Communication,
It depends on your network architecture. If you have a homogenous corporate network, with well configured internal firewalls, go for the framework that gives you the most functionality, like WCF. If on the other hand, you will have to deal with different authentication mechanisms or domains, or with firewalls that only allow certain types of communication, you may have to kick down to a lower level of in-built functionality.
RajeevBhatt wrote: Data persistence,
Again, it depends: you may use a persistence framework like the entity framework, but if your data is not well suited to relational operations (and is large enough), you may have to deviate a lot from standard mappings, in order to optimise performance, to the point where a persistence framework becomes more a burden than an asset.
RajeevBhatt wrote: Performance,
Architecting for performance will again depend on the functionality of the app. Will you be able to scale on different servers, or are the operations single-threaded by nature? Will you be able partition your database, or will the queries by their nature prohibit partitioning.
As you see there is no 'right' architecture. Architecture depends on what you want to do. It's the same with building architecture: If you want a lighthouse, you'll probably design a tower-like structure close by the sea.
It will probably be unusable as a soccer stadium though 
|
|
|
|
|
Hello,
I want to design a C (Not C++) library for NLP (some thing like WINDOWS API but for NLP).
Is there any references for "API Design Guidelines"?
Some things like:
* How to choose name of API functions
* Memory management
* ...
Thanks
|
|
|
|
|
"Clean Code A Handbook of Agile Software Craftsmanship" may be what you are looking for [^]
|
|
|
|
|
|
Hi all.
I develop a software based on an open source software in VC++ (Base software is "TrueCrypt version 4.3" )
I want to update my software when new version of base software ("TrueCrypt") released.
How I can walk with that software version with low cost and attempt? Are there any framework or method for this?
Thanks a'lot.
|
|
|
|
|
There's a few points to consider if you derive a new product from the TrueCrypt base, like removing the text "A TrueCrypt Foundation Release". You can find a complete list in the license agreement[^]. There's no framework that does this for you.
I are Troll 
|
|
|
|
|
I'm developing an app that allows the user to create custom data structures (which are stored in an underlying database). Currently, I'm in the proccess of designing a module that will generate reports from the user's custom data structures. (This way the user can obtain some quick output without having to design a report from scratch)
My question is: If the amount of fields in the custom data structure exceeds the width of the page, is it customary to continue the report columns onto another page or rearrange the fields so that all fields reside on the same page?
If my answer has helped you, one of my articles may also be a help. Also remember that your best friend's name is google.
|
|
|
|
|
I'm not sure whether you mean a page on a screen view or the printed page, but isn't this a question to be put to the potential users? or based on 'Lessons learned'? Whatever you decide, possibly based on advice from CP, it may not be what your users want.
On the other hand, as this is a design question, If the only way the user can get the information they want is to include data fields in a report that either: Doesn't fit on the page (printed or otherwise), or is: Rearranged so the info in the columns is perhaps dificult to read, maybe a single report with that many columns is not the best design choice?
|
|
|
|
|
I'd be more inclined to go with data dump type functionality, you no longer control the content therefore you lose control of the output. Display the data in a grid (if possible) and output via csv.
Never underestimate the power of human stupidity
RAH
|
|
|
|
|
Thanks in advance
Is there any website from where we can find out the Business Processes , Data Flow Diagrams or something related to a Flow of a business or any Business.
SOFTDEV
If you have knowledge, let others light their candles at it. [ Let's work to help developers, not make them feel stupid ]
|
|
|
|
|
Hi..
Modern day application design seems to always lean towards a decoupled architecture: you have a dumb view, which is independent of your data model. This makes sense as it allows you to reuse the controller/model independently from the view. Seemingly contradicting this is modern controls which seem to lean more and more towards databound designs.
How do we reconcile this kind of architecture with the controls at our disposal? For example, I am creating an application following a Passive View MVP architecture that, at some point, will have to manipulate items in a grid, and the grid works best if it is directly databound to the database. Am I using the wrong design architecture? Or should I be super-abstracting my data? (Database -> Dataset -> Classes -> Dataset -> View) 
Design patterns always sound so good in theory...
|
|
|
|
|
I don't know, and I'm interested in the replies you will get.
I guess the fitting quote will be this one:
In theory there is no difference between theory and practice. In practice there is. [Yogi Berra]
|
|
|
|
|
ruanr wrote: should I be super-abstracting my data?
This is exactly what I recently found I needed to do using a MS TreeView and a STL-like Tree container.
I set out wanting a series of low level instructions to be sequentially sent to a cell of electro/mechanical devices including a robot arm and other automated bits of laboratory kit. But wanted to give the User control of this instruction sequence by presenting them with simple control buttons much like those of a Video or DVD player: Forward, Pause, Step and Stop. But critically I also wanted to be able to undo/redo the instructions and add Back and Step-Back to those options presented to the User.
I also wanted to be able to eventually throw away my development GUI and have someone then integrate what was left into a nice shiny Application GUI alongside all the other bells and whistles needed.
I found a tree view was the 'natural' way to display to the User and the MS TreeView Control did this, but it didn't do other things I wanted so found another STL type Tree container class that I could use to accomplish the other things.
ruanr wrote: Design patterns always sound so good in theory
I based each instruction to a device on a combination of Design Patterns: Command and Do/Undo so that a Do-instruction could be loaded into a Leaf (of the STL-type tree) with a corresponding Undo-instruction. Of course I had to link the corresponding nodes on the View tree to the Container tree but this wasn't that difficult.
Though non-'super-abstraction' is tempting, separating the view from the the actual data like this I've found to be an essential development approach. From so many perspectives: Project-Management; Maintenance or Further-Development, separation like this turns one problem to two nicely defined smaller ones, reduces the overall complexity and makes the whole much cleaner, more likely to actually work and much more understandable to others.
|
|
|
|
|
ruanr wrote: Am I using the wrong design architecture?
Only if you are overdesigning. It's ideal if you have a complex datasource, lots of developers, and/or lots of different ways of visualizing the data. If you're only displaying a list from Microsoft Access and asking the user to select an item therefrom; by all means, just databind it.
As a question to you; what benefits do you gain from using an MVC/MVP pattern, and what benefits would you have without this design?
I are Troll
|
|
|
|
|
ruanr wrote: at some point, will have to manipulate items in a grid
As I understand it, to perform tasks like manipulating items in a grid, we will be using constructs like Commands and Attached Behaviours (at least in WPF and Silverlight).
However, I would be curious to know the best ways to do this in ASP.Net.
Me, I'm dishonest. And a dishonest man you can always trust to be dishonest.
Honestly. It's the honest ones you want to watch out for...
|
modified on Sunday, March 28, 2010 11:43 AM
|
|
|
|
|
I think there are 2 distinct levels of understanding with data binding. The newbie uses the MS wizardy things and is led into the mire of controls bound directly to the dataset/table etc.
This lasst until they actually want to do something beyond displaying an Access list for the user to select from, at which point the new dev finds a whole new universe of DAL, object layer, OOP and all the stuff a more seasoned developer already deals with. Then the learning really begins.
IMHO tightly coupled controls have absolutely no place in anything but a learning/prototype application. MS is doing the newbie a great disservice even creating the wizardy things.
Never underestimate the power of human stupidity
RAH
|
|
|
|
|
Looking for any good software development magazines to help keep me informed. Anyone have any suggestions?
|
|
|
|
|
www.code-magazine.com
Everything makes sense in someone's mind
|
|
|
|
|
One of our clients are looking to develop LMS for SCM and Sales departments.. here are the requirements specified by them:
Technical
Primary systems: Flash and Adobe Captivate
Other: We will be rolling out an SAP LMS (learning management system) soon and would like to understand how LMS are supported technically
Content
What does the story boarding process look like?
What are the capabilities around instructional design and graphic design?
It will be very helpful if someone provides their ideas..
Regards,
Chiranjeevi
|
|
|
|
|
So let me get this straight: you've taken on a job for which you have no prior experience and not a clue as to how to proceed and you want one of us to tell you what to do? What have you already done to understand the requirement? What money, as a business, have you invested in bringing on board or acquiring the requisite skill sets to accomplish the task? Does the client know that you're asking these questions?Tychotics
"The dinosaurs became extinct because they didn't have a space program. And if we become extinct because we don't have a space program, it'll serve us right!"
Larry Niven
|
|
|
|
|
Hi,
I have question regarding architecture when dealing with composition/aggregation hierarchy. The three classes below "House", "Room" and "Door" describes a simple nested architecture used for this question. This architecture means that when I use a House object and want to refer to a door nested in a Room I will brake the "Law of demeter" rule that states that I should only use direct connection like House.ToString() not indirect connection like House.Room.Door.ToString(), is this okay or bad practise, is there any better way of organising the architecture?
Would it be better to do helper functions for the door in the Room Class, and not expose a Door object public, like:
DoorOpen();
DoorClose();
If this arhitecture is prefered, what should be done with the events inside the Door class, should they also be defined once again in the Room class and be "chained" back thru it's parent classes some way ?
Any thoughts, tips and ideas would be helpful.
public class House
{
public House()
{
Room = new Room();
}
public Room Room { get; private set; }
}
public class Room
{
public Room()
{
Door = new Door();
}
public Door Door { get; private set; }
}
public class Door
{
public event EventHandler<EventArgs> OnOpen;
public event EventHandler<EventArgs> OnClose;
private bool _isOpen;
public Door()
{
}
public void Open()
{
_isOpen = true;
OnOpen(this, new EventArgs());
}
public void Close()
{
_isOpen = false;
OnClose(this, new EventArgs());
}
}
|
|
|
|
|
I don't know if this will help you or not, but internal doors will be shared - two rooms will both have the same door that opens and closes between them.
|
|
|
|
|
yep. Give Room a public CloseAllWindows() method and let it keep the windows to itself.
(I substituted windows for doors, to keep Graham happy).
|
|
|
|
|
It's correct a Rooms will share a door in my example, but it was just ment as an example
So let's continue and consider a window class instead. What happends if I have alot of member data in my Window class should I still use the class 'Window' as a private member inside 'Room' and make "wrapper" Methods and events inside Room like: Room.CleanWindow(int index), Room.OnWindowCleaned(), Room.OpenWindow(int index). etc etc. Sort of chaining methods and events.
This seems to duplicate Methods and Eventsin a way, thoughts about this ?
|
|
|
|
|
One advantage of using "wrapper" methods is that you can use them to do things that the Window class doesn't know about:
class Room {
public:
void OpenWindow(int index)
{
try {
plants[index].Remove();
windows[index].Open();
plants[index].Replace();
} catch(DroppedPlantPotException& dppe) {
CleanTheFloor();
}
}
private:
std::vector<Window> windows;
std::vector<PlantPot> plants;
};
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
![Java | [Coffee]](https://www.codeproject.com/script/Forums/Images/coffee.gif)
Now with 26% more Twitter
