|
isn't there anyone who can help me.... ...plz rply
|
|
|
|
|
Hi there,
I already described my problem here.
Short description: I am using an API from an DataProvider to program a financial stock exchange analysis program. I can fill a DataStream Object provided by the external API with multible Instrument Objects. This DataStream fires events every time a new price occurs for the respective instrument on the exchange.
If there are many (>50.000) Objects in the DataStream, sometimes it will stop firing the events. It has nothing to do with my code, I already tested the code performance and it looks ok. So somehow this "COM-Server" of the external API is the reason for this behaviour. I noticed, that the problem will occur more often on systems with older CPUs. So it also has something to do with the CPU Power.
Is there any way to influence the performance of the COM Server? Something in the Network Preferences?
Any suggestions would be appreciated.
|
|
|
|
|
You don't say how you instantiate the COM Server, but if it's an out-of-process server, or a component that you access from a remote machine, and you are a client of that server, then the COM library uses the RPC protocol to transfer the data back and forth between the two machines. You might refer to: The Network Protocol[^], a chapter from the book "Inside COM+", which describes the methods COM uses to communicate with a DCOM component on a remote machine. Also, from the same book, Standard Marshaling[^], explains the actual COM Library mechanisms involved in managing the proxy and stub architecture.
If you are accessing an out-of-process server, then that is definitely your bottleneck, and not the code that you posted in the C# Forum.
|
|
|
|
|
Ok, i'm coding in CSharp. The DataProvider API is the TaiPanRealTime API which I define in the Program.cs class:
public static TaiPanRTLib.TaiPanRealtime Tapp;
so I do with the DataStream object from TaiPan, which fires the respective events:
TaiPanRTLib.DataStream TPStream;
I instantiate the Class (start the Server) in a method:
if (Tapp == null) { Tapp = new TaiPanRTLib.TaiPanRealtime(); }
TPStream = (DataStream)TPapp.DataStream;
I add the events:
TPStream.Brief += new _IDataStreamEvents_BriefEventHandler(TPBrief_Brief);
TPStream.Geld += new _IDataStreamEvents_GeldEventHandler(TPBrief_Geld);
So thats how I set up the TaiPan Application (and with it the COM Server).
I am not a network specialist, all I could learn from the link you posted is that the COM Server uses the RPC Protocol. The RPC runs in a svchost.exe process, but I don't see any performance changes of the respective processes in the taskmanager when I start my program.
But thank you anyway for your help!
|
|
|
|
|
...Sorry, didn't mean to confuse you,...but, I got the impression that you code was OK, and that you were losing data because of physical system execution limitations. You suggested that there might be some setting in Network Preferences that would increase the performance of your DataProvider. Naturally, I assumed that you were receiving your data over the wire (which is why I made the RPC suggestion).
...So, now. I'm confused. When you describe the DataProvider as an external API, what does that mean? The library exists on your machine, and you are just linking to it when compiling? Or are you using a header file that was provided by someone who developed the Data Provider, and you use that information when instantiating (with CoCreateInstanceEx, or equivalent COM library function). Are you just developing a client application, or both a server and client, and are testing it on your machine? Can you understand my confusion?
Anyway,...I'm guessing that you have it all figured out by now.
|
|
|
|
|
I am sorry about the confusion, I will try to describe it better:
TaiPanRealtime is a Financial Charting Software from the company Lenz&Partner and can be downloaded here[^]. You must have a valid account to use this software.
It features Realtime Charts, News etc which you can access through a GUI. And it also comes with a C# API, that's what I meant with 'external API'.
After installation of the TaiPanRealtime software, in my C# Project I can add a COM Reference to the TaiPan Realtime Library to access certain functions like the DataStream I described in the posts above. [I just noticed that the path to this library does not point to an *.dll file but to the TaiPanRT.exe, don't know if this is important.] When I start my program, I first have to login to TaiPanRealtime. TaiPanRealtime then connects to the server at Lenz&Partner via internet.
When i am using the TaiPanRealtime-DataStream object, the server at Lenz&Partner have to know which symbols (equities) I am interested in. This is done by filling the DataStream with symbol numbers. The server then starts to deliver current prices for the respective instruments. The Data comes over the Internet, through the TaiPanRealtime Application and finally in my program where I can analyze it.
I already talked to the support at Lenz&Partner and there is where I first heard the word 'COM-Server'. They said, the TaiPanRealtime Application stored on my computer contains this 'COM-Server' and its performance causes my problems.
If anything is not clear, please say.
|
|
|
|
|
Thanks,...that last post is MUCH more informative. Interesting program. And, apparently, you've done the correct thing, contacting the support group for TaiPanRealtime COM server (they undoubtedly get the same types of inquiries and complaints over and over).
The fact that the COM library you are linking to is an .exe file IS actually important. It indicates that the COM Server (on your local machine) runs as an out-of-process server. You can check this by finding the listing for the GUID of the COM server in your registry, and there will be specific settings that the COM library (on your local machine) uses to manage the server process. An out-of-process COM server uses a Stub and Proxy architecture to implement the marshaling of data between your client application and the existing COM server that you instantiate when you invoke CoCreateInstance for the object. There is, of cource, an overhead involved when the COM library uses this stub and proxy architecture, in terms of execution time. But, I think that your essential problem is that the data that your TaiPanRealtime COM server is transmitting is being received from a remote machine through the RPC mechanism. The overhead here (again in terms of processor clock cycles) is MUCH greater than the time it takes to execute the code to allocate and process that data from within your local client application. The RPC protocol only allows for a limited amount of data traffic.
If you want to learn more about the whole COM server and client model and the security aspects of the COM library stub and proxy architecture, I would recommend that you get a copy of Don Box's[^] "Essential COM". It's the best book on the subject.
All that information, however, won't really do you much good with your current problem of trying to increase the flow of data from the COM Server on the remote machine, that is providing you with the essential data you need for your analysis. The only suggestion that I would make (and, this seems kind of obvious) is to query for a more restricted data set, and utilize that information more effectively (by archiving it, perhaps), and updating it as it becomes available. Do you really need all that data from so many small fluctuations immediately? Can you reschedule the events so that you have a more managable Data Stream?
|
|
|
|
|
Very, very interesting answer! I tried to check the COM Server in the registry, but I am not sure if I completely understand what you meant (for what GUID I should look for, in which path etc...)
From your post I learned that the communication between my application and the COM Server is different to the one between COM-Server and the remote machine. First one produces little overhead, last one much more.
You mean that this overhead is the overhead on my machine, right, and can be influenced by a faster CPU?
What if I run 2 instances of my application, each one on a different CPU?
I will think about your last comments!
Many Thanks!
|
|
|
|
|
There is an excellent article right here at Code Project that describes clearly and in detail the registry settings that a COM component must make on the host machine: COM IDs & Registry Keys in a Nutshell[^]. Also, you can use the search capability in the Registry Editor, by supplying the GUID in its canonical form, which looks like this: {60B4140E-B0A7-4540-B744-7E1A944E8C78}
(your GUID will be a different number, of course)
This is a 128-bit unique number expressed in hexadecimal. Look in the registry key: HKEY_CLASSES_ROOT\CLSID\...for a long list of all the registered COM CoClasses available on your computer.
What I meant by overhead was the time it actually takes to execute certain instructions or a series of instructions on a computer. This is significant since it places serious restrictions on the overall performance of the software. Assembly programmers test their algorithms all the time in their quest for speed, or, what they would call 'optimization'. Typically the time it takes to execute a function is expressed in clock cycles, based on the rated speed of your processor. Generally, what I'm referring to as 'overhead' are the set up procedures (and security checks) performed by the COM Library, the creation and transmission of the Data Packets exchanged by the Standard Marshaling Architecture (stub and proxy) between your local COM Server and Client Application, and the transmission of the Data via the RPC protocol between your local machine and the remote machine, and the handling of any associated errors.
Debugging these kinds of Networking DCOM problems can be difficult, if not impossible.
|
|
|
|
|
I was googling "RPC DCOM Transmission Acceleration", and I hit this Microsoft Corporation patent description at Patent Storm: Accelerating a Distributed Component Architecture Over a Network Using a Modified RPC Communication[^]. This information is taken directly from the document and describes the 'overhead' better than I did.
"As can be expected, calling an object located on the same computer is faster than calling an object located on a remote computer. This speed difference can be due to a number of factors. The network cables are significantly longer than the leads between the processor and the memory on the local machine. Therefore, the electrical signals simply take longer to reach the remote computer than to reach the object resident in memory on the local machine. A significantly larger factor is the overhead caused by the network protocol. Each data transmission over a network must be encapsulated, and additional information must be added to the packet so that it may be transferred across the network with error correcting capabilities, and so that it may properly be decoded on the remote machine. Furthermore, each packet sent over a network may be accompanied by a flurry of additional network packets performing necessary buffer management and receipt acknowledge functions. These further packets, which comprise the network flow control, also add to the time required to send an object call over a network to a remote computer."
"An additional factor contributing to the speed difference between a call to an object resident on the same machine and one resident on a remote machine is the overhead created by DCOM and the RPC model. RPC marshals pointers and data to be transmitted across the network by reading them from the program memory and packaging them for transportation across the network. Marshaling introduces delay because it copies from program memory into an RPC buffer the element that is to be transmitted across the network. Another aspect of the overhead of DCOM and RPC are the runtime layers. The RPC and DCOM runtime layers bridge together the client and server so that the client can make remote calls to the server. This process of bridging the client and server together is known as binding. Binding information can include the Internet Protocol (IP) address, the port number, and the interface identifier (IID)."
"The combined effects of the marshaling, the additional packets of flow control, and the activities of the runtime layers result in a dramatic decrease in the performance of DCOM over a network. In fact, compared to a raw network application which directly sends data across the network, the DCOM overhead can decrease performance by a factor of three or more."
I'm thinking that there is probably a way to query the rate at which the Data is sent over the the wire in the RPC protocol, but, probably this capability resides in the Remote COM Server. It may not be accessible to your local COM server. Otherwise, I don't really have any suggestions, since I am unfamiliar with the specific COM architecture of your remote server. You could, of course, monitor the performance of your local COM server, establish a baseline for the maximum amount of data that can be accessed, and design accordingly.
A better way would be to design an algorithm that predicts small data fluctuations (based on observed patterns) and, if a cyclic or periodic correlation is evident, eliminate as many redundant data queries as is reasonable, perhaps querying less and less often if your algorithm successfully predicts the outcome of insignificant data fluctuations. I don't know, I'm not really sure what kind of data you receive, or of what significance it is to your analysis.
|
|
|
|
|
Once again, thank you very much for your input. I searched the registry for a while and looked at the properties of the respective COM object, but could not think of any way to change its behaviour in a positive way. I also had a look at the MS patent article, which was very interesting but also confusing  I don't think they already implemented this new technique in one of their OS, right?
Anyway, I got an idea how to improve my algo: The DataStream Object offers the ability to remove instruments during runtime. So I can filter instruments out while analyzing. Maybe there are other way too.
At least I have to know now where to improve my application - once again, thank you very much!
|
|
|
|
|
hi all,
How someone can help with this question. I am trying to write a number of tables to Word. I can create the document and application and add a table, my problem arises when I want to seperate them. I believe this is something to do with the "range". The first table is set at range (0, 0), I then try to reset the range, or try to insert some blank lines and reset the range. I have also tried to create a new range for each table but I get the same result everytime which is the new table gets inserted into the first cell.
I have done some serious brain damage reading MS help on ranges and how to reset them and also moving selections up on and down- nothing seem to work. Utimately I have 8 tables and I want one table on 8 seperate pages.
thanks for any help you can give
Imports Microsoft.Office.Interop.Word
Imports System.Runtime.InteropServices
Public junk As New DataTable
Private Sub WriteTables()
Dim oApp As Application
Dim oDoc As Document
'Start a new document in Word
oApp = CType(CreateObject("Word.Application"), Application)
oDoc = oApp.Documents.Add()
' Clear out any existing information.
' oDoc.Range.Delete()
' make the current documents the ActiveDocument
oDoc.Activate()
Dim rng As Range = oDoc.Range(0, 0)
rng.Font.Name = "Verdana"
rng.Font.Size = 16
Dim tlb As Table = oDoc.Tables.Add(Range:=rng, NumRows:= junk.Rows.Count, NumColumns:= junk.Columns.Count)
tlb.Range.Font.Name = "Arial"
tlb.Range.Font.Size = 20
With oApp.Selection
.SetRange(tlb.Range.End + 1, tlb.Range.End + 1)
.Collapse(WdCollapseDirection.wdCollapseEnd)
End With
' Dim i As Integer
' For i = 1 To 5
' oApp.Selection.MoveDown()
' Next
' rng = oApp.Selection.Range
' rng.SetRange(Start:=0, End:=8)
' rng.SetRange(Start:=rng.End + 3, End:=rng.End + 3)
Dim tlb1 As Table = oDoc.Tables.Add(Range:=rng, NumRows:=6, NumColumns:=6)
oApp.Visible = True
End Sub
|
|
|
|
|
This page[^] shows how to add a new table at the end of a word document.
And also try adding a new paragraph for each new table - this VBA code creates a new document with two tables:
Sub Test()
Dim NewDoc As Document
Dim NewTable As Table
Set NewDoc = Application.Documents.Add(, , , True)
Set MyRange = NewDoc.Content
MyRange.Collapse Direction:=wdCollapseEnd
Set NewTable = NewDoc.Tables.Add(Range:=MyRange, NumRows:=6, NumColumns:=10)
NewTable.Borders.OutsideLineStyle = wdLineStyleTriple
NewDoc.Paragraphs.Add
Set MyRange = NewDoc.Content
MyRange.Collapse Direction:=wdCollapseEnd
Set NewTable = NewDoc.Tables.Add(Range:=MyRange, NumRows:=6, NumColumns:=4)
NewTable.Borders.OutsideLineStyle = wdLineStyleTriple
End Sub
Java, Basic, who cares - it's all a bunch of tree-hugging hippy cr*p
|
|
|
|
|
Hi,
I have a COM dll when i update interface manually my application crashed. but when we update the interface by wizard its working properlly. can any one tell me why this happend and if i want to update any existing interface manually what should i do?
Thanks in Advance
Ashish Chandrakar
|
|
|
|
|
You're clearly doing something wrong when you're manually editing the idl.
The compiler doesn't distinguish between manually added and wizard added code.
chandrakar ashish wrote: can any one tell me why this happend
You will have to post the part which you manually edited.
«_Superman_»
I love work. It gives me something to do between weekends.
|
|
|
|
|
I think you are missing some thing while updating idl file manually.
Can you please provide some ifo as what you are trying to update. and when is your application crashing.???
|
|
|
|
|
As the other answers have suggested, you're cleaarly doing something when updating the interface manually, so why not update the interface both manually AND by using the wizard, and seeing what the differences are between the IDL generated by the two mechanisms? That should help you realise what you're missing out...
Java, Basic, who cares - it's all a bunch of tree-hugging hippy cr*p
|
|
|
|
|
Hi all,
Thanks a lot for your help in advance.
I am doing a Mail Merging Application. I can get all data from the source (database, file or anything) and using mail Merge fields in Word Document from C# code, I open up the word which is merged with data from database.
MS Word Document Opens –
--- should this be open in IE
--- Or should this be open as ordinary MS Word on Desktop
The problem is if I open it anyway, I loose all control over the Word Document which is opened. I don’t want to do that. I want to keep control over it and allow the Users to update the document with some standard messages which we have in the project. What that means is, the messages will be selected and those messages selected will be put at some point where cursor is kept in the document.
So, when mail merging happens
MS Word Document is opened.
A pop up with standard messages is opened.
User selects the messages he/ she wants to insert into the MS Word Document which is opened.
For these things to happen, I should have control over the MS Word Document which is opened on the client side. Do selection of the messages and populate in Word document (this is my understanding, is there any way to do it easily).
The Issues are:
I need a way to open the MS Word Document in a controlled manner where I can still control the User editing or help user in editing when he / she clicks on my standard messages and wants them to populate on the MS Word Document.
How can I save the MS Word document and make sure that user is not saving it locally and has to upload it again to save it on server.
I Hope I am clear in explaining the situation, please find the attachments which show the MS Word Doc and the popup on side .
|
|
|
|
|
Here is the IDL definition
[
object,
uuid(DAFB7D76-0158-452F-8FD0-FF97A683DEA3),
helpstring("ITest Interface"),
pointer_default(unique)
]
interface ITest : IUnknown
{
[helpstring("method GetString")] HRESULT GetString([out,retval] BSTR* pVal);
};
[
uuid(E768DC15-A19B-407C-ACF9-C420D6FDB1BE),
version(1.0),
helpstring("TestServer 1.0 Type Library")
]
library TESTSERVERLib
{
importlib("stdole32.tlb");
importlib("stdole2.tlb");
[
uuid(788571BD-030B-49CC-8C0A-2DF74E58331A),
helpstring("Test Class")
]
coclass Test
{
[default] interface ITest;
};
};
The ATL COM Library uses APARTMENT threading model.
And the VB.NET windows service code fragment
try
Dim obj As New TESTSERVERLib.Test
Dim s As String
s = obj.GetString()
Catch ex As Exception
WriteToLog(ex.Message)
WriteToLog(ex.InnerException.ToString)
End Try
When the code executes the following error occurs:
Unable to cast COM object of type 'TESTSERVERLib.TestClass' to interface type 'TESTSERVERLib.ITest'. This operation failed because the QueryInterface call on the COM component for the interface with IID '{DAFB7D76-0158-452F-8FD0-FF97A683DEA3}' failed due to the following error: No such interface supported (Exception from HRESULT: 0x80004002 (E_NOINTERFACE)).
Object reference not set to an instance of an object.
But the same code works in VB.NET forms application.
Can anyone please explain the reason.
|
|
|
|
|
I am trying to add an extra property page to a device in Windows 7 Devices and Printers. I am following
http://www.microsoft.com/whdc/device/DeviceExperience/DevPrintFolder-Ext.mspx
and
http://msdn.microsoft.com/en-us/library/cc144106(VS.85).aspx
I can add a shortcut item to "right click" menu of the device successfully; however, the extra property page does not show open in device Properties window. If I follow the same steps to add the extra property page to a .test file type, it works and I can see the extra property page shows up. It seems that the COM dll for the property page is fine. Any one successfully completed similar things before?
The following is what I added in Registry:
HKEY_CLASSES_ROOT\CLSID\{Page 1 Property Sheet Handler CLSID GUID}\InProcServer32
(Default) = C:\MyDir\MySheet1.dll
ThreadingModel = Apartment
HKEY_CLASSES_ROOT\DeviceDisplayObject\HardwareId\Device hardware id\shellex\PropertySheetHandlers\MySheet1
(Default) = {Page1 Property Sheet Handler CLSID GUID}
|
|
|
|
|
hello ,
Button on Toolbar not showing chervon effect. When i drag toolbar for chervon then first button is overlapp on all buttons and no image is added into chervon list..So may be problem and which function called when i drag button on toolbar.
Thansks
Am
|
|
|
|
|
maybe one day I could help you to solve the problem.
|
|
|
|
|
Hi Guys,
I have been searching for a SMPP lib for a while now, I finally stumbled on a dll, created by a Romzy, but there wasnt any samples or instructions for implementation, nor have I been able to trace the developer, I have tried using the DLL with little I could gather from the SMPP protocol definition, but in binding to a SMSC, it includes a Sendbindtranceiver with requires (index as short, hsocket as integer, SMPP_PDU_Bind_Transmitter), what I'd like to know is, anyone understand or can suggest what the index might mean or how that data type (short) can be represented and what does hsocket mean.
I do understand that it may be impossible to understand without seeing the code, but I m snatching at straws right now.
Any help or suggestions will be welcome.
|
|
|
|
|
Hi..
You are using a third party com or if you create your own api? Please let me know the detail.
Thanks
Md. Marufuzzaman
|
|
|
|
|
Hi, Thanks for the quick response.
I am using a third party com dll, but cant seem to bind to the smsc.
I will be grateful if you have a Smpp library preferably com, that I can use.
|
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
