|
Quake2Player wrote: Any opinion about the second thing, SHOWING/DISPLAYING ?
(a) The form uses the Tag property of controls to contain the objects from the model (for example an Account in a ListViewItem' tag)
(b) The form uses the Tag property of contrls to contain an identifier of the object of the model (for example an Account id)
I'd prefer (b) for the same reason. That way the objects stay inside the model where they belong; the view has no direct knowledge of them. If they change structure at some point, it's less likely to affect the view.
This is just my opinion...
The boundaries of each subsystem, in this case the model, view, and controller, should appear as flat as possible to each other. That is to say each subsystem has a nice, flat API that the other subsystems can access. So instead of something like this, for example:
SomeObject obj = model.GetSomeObject(int id);
obj.SetValue(123);
You have this:
model.SetValue(id, value);
In the second example we have no knowledge how the model represents the values inside. All we want to do is set the values or whatever.
|
|
|
|
|
For a few reasons:
1. Separation of Concerns (SOC): The model should be what the name states--just a model. It should not have other logic. Any logic which is outside the domain model of the "model" and is used for controlling should go in the controller.
2. A pattern is to build vocabulary amongst developers. You do not have to implement it this way. And if you don't, then you are no longer using MVC so you can not tell other developers, "I used MVC pattern here but I decided to throw out the controller."
3. There are many occasions wherein designers have decided to put the controller logic within the model, for example, many .NET classes do databinding this way. DataTable sends an event when data is changed, and the DataGridView handles the event.
Your question below about option a and b, I would go with option b and pass the object over. But instead of asking the object for its state using properties, I would do the following:
Lets say I have Employee class
public class Employee
{
public string Name
{get;}
public string LastName
{get;}
public string FullName
{get;}
public int Age
{get;}
// I will have one method as below which will return the state in a structure in one shot
public EmployeeProperties GetState()
{
EmployeeProperties props = new EmployeeProperties();
props.Name = this.Name;
props.LastName = this.LastName;
props.Age = this.Age;
return props;
}
}
public struct EmployeeProperties
{
// The fields for the struct
}
There is no right and wrong way. It is like art, you might have a more elegant solution than anyone has ever had.
CodingYoshi
Visual Basic is for basic people, C# is for sharp people. Farid Tarin '07
|
|
|
|
|
Nice! Didnt thought on that solution..
Instead of having large methods with a lot of parameters... Thank you
|
|
|
|
|
Hi All,
I am planning to develop a client server application . Can anyone let me know the best way of defining the message protocol between client - server.
|
|
|
|
|
There is no best way, it depends entirely on what you need to communicate between the client and server.
|
|
|
|
|
Member 4047183 wrote: Can anyone let me know the best way of defining the message protocol between client - server.
Requirements
|
|
|
|
|
In the past I have used datatables as my data "entity". So if I wanted a list of rooms for a house I have a stored proc for GetRoomsForHouse(HouseID) and this would reside in the Rooms class.
Now with List<> I am moving to lists of objects as my data "entity". My current structure (LoadObject) is up the FK path ie Fitting inherits from Room from House from Street etc. So getting a fitting (stool) will get 4 records from the database to load the ingeritance tree, this is fine and works well if there you are working with 1 stool.
Now I want all the fittings in Room101, this potentially generates 4 x #n fittings calls to the database to load the List<fittings>. This is still reasonable but when I want a list of all fittings in 60 storey tower block it gets a little overwhelming.
In the past I would simply have a proc to get all fittings by a number of different criteria and use the datatable to load the display controls. So I have a number of option to follow:
1. Continue with the proc to datatable - this precludes using a List<> to populate data list controls
2. Use the LoadObject method and wear the database calls - worst case and will not be implemented 
3. Use a proc to get the data IE Fittings RoomName,HouseNo,StreeName etc and create a class to service a List<fittingsforxxxx> with the results from the proc.
4. Split my design of an object to display/process where display gets only the data used to load into list controls. The process object would be a full inheritance tree of a single object (Fitting).
I want to use 3 but it means there will be a plethora of classes in the app to support display. 4 may be the better option as it standatdises on the object rather than the proc.
The amount of code is not an issue as I will use my code generator to build it all.
2nd issue
When dealing with lists of objects should the list reside in the parent or the child eg:
Room has a List<fittings> and while the select for the List is on Fittings the List is on Room - Parent has the list.
Fittings has a List<fittings> for a Room and retains the List on the Fittings object - Child has the list.
Never underestimate the power of human stupidity
RAH
|
|
|
|
|
I don't understand your question. Is your question basically that you know how to load one object from the database but loading multiple objects seamlessly from the database (or any storage) you are having trouble with?
CodingYoshi
Visual Basic is for basic people, C# is for sharp people. Farid Tarin '07
|
|
|
|
|
I thought I had wasted my time with this question.
No I have no problem managing the data it is the design I am tossing around. When dealing with a list of something do I create the list in the something class or in the parent class.
2 classes, Department and staff. I now want a list of staff for the department. Is the best design I am after.
Departmant
List of staff for department(this.DepatmentID)
Staff
Get for Department(DepartmentID)
Or both, hah thats probably the right way. Staff gets the list for a department because it is a list of staff and department calls the same method on staff to get the list of staff for itself.
The problem is I use stored procs ALL the time so there would be a proc out there called StaffGetForDept(@DeptID) and deciding on the owner class for the proc is sometime an issue.
Never underestimate the power of human stupidity
RAH
|
|
|
|
|
I don't like the idea of asking the Staff object to return a list of Staff objects. A staff should have methods and properties for a Staff but not a list of Staff. I would take one of the collection classes (if using .NET or something similar if using else) and extend it like below:
public class StaffCollection : List<Staff>
{
private Department _department;
// Inject the object with the department at construction
// Now this staff collection realizes its department
public StaffCollection(Department dept)
{
this._department = dept;
}
public void Load()
{
// Load this from the database. I will create a DAL and pass a reference of this to it so it can load it for me.
}
// You can put many other methods--based on your requirements--here. For example, find all employees who earn more than 100K and it will return a bunch of employees who wear pink shirts and have spiked up hair
}
Here is the department class
public class department
{
// put everything for department here: email, name etc.
private StaffCollection _staffs;
public Department()
{
this._staff = new StaffCollection(this);
}
public void LoadStaff()
{
// You can check first if already loaded or just reload everytime
this._staff.Load();
}
}
You will still need a Staff class and might need a DepartmentCollection class.
CodingYoshi
Visual Basic is for basic people, C# is for sharp people. Farid Tarin '07
|
|
|
|
|
CodingYoshi wrote: I would take one of the collection classes
Now that makes sense, I have no collection classes in my design, all the lists (I usually use datatables) come from the single class, this is b/c of my reliance on datatables (and recordsets of course) in the past.
Never underestimate the power of human stupidity
RAH
|
|
|
|
|
Hi,
I think I've got a god object antipattern problem, or not, please tell me:
I have a class Admin that contains several lists of things that might interact each other,
for example: It contains a list of Messages, Accounts, Contacts, Filters etc.
The problem is that some of them interact with each other.. for example, the AddMessage method applies all the filters in the filters list.
The Admin class is pretty big.. because it haves Adds methods, Deletes methods, ..so it has like 2*(fields that are objects or lists of objects) methods
Do i have a god class or is it well justified?
In case I do have a god class, should I split the Admin class in several Administrators? like AccountsAdmin, ContactsAdmin, FiltersAdmin, ..? or what?
Thanks
|
|
|
|
|
I would have an Admin PROJECT and a class for each of your entities (accounts, contacts etc)
Never underestimate the power of human stupidity
RAH
|
|
|
|
|
You didn't get the problem.
I DO have a class Account, Message, Filter, etc.
|
|
|
|
|
Quake2Player wrote: In case I do have a god class, should I split the Admin class in several Administrators? like AccountsAdmin, ContactsAdmin, FiltersAdmin, ..? or what?
I assumed the admin for the classes is done in the one Admin class. I try to keep any lists etc in thier respective classes eg the Contacts list is always found in the Contacts class and admin uses the ContactClass.List, it never has a copy of its own list of contacts. If Filters need a contact or list of contacts it goes to the contact class, admin does the same.
The only time I vary this is if Filters needs a special list of contacts and Thingy needs a different list of contacts for some reason. Then I allow the other classes to have their own lists internally.
Never underestimate the power of human stupidity
RAH
|
|
|
|
|
Quake2Player,
Read my reply to MyCroft Holmes question above and it should/might help you.
CodingYoshi
Visual Basic is for basic people, C# is for sharp people. Farid Tarin '07
|
|
|
|
|
I'm looking at a new project where the customer wants to use RS232 serial comms to exchange information between 2 embedded systems.
(They need the new system to support legacy boxes, they can change the protocol on the old boxes but will not chnage the hardware. At the momment each box has is own way.)
I'm having trouble locating an industry standard for the protocol. I've found ISO 1745 which looks like it should do the job but its dated 1975 and that just feels wrong.
Does anyone know of a more recent industry standard that defines point to point data exchange over RS232?
Thanks
Alec
|
|
|
|
|
AlecJames wrote: Does anyone know of a more recent industry standard that defines point to point data exchange over RS232?
It seems to be discussed here[^] and there are reference links at the bottom that may link to the specs.
|
|
|
|
|
Hi,
you can use any protocol you like, or come up with your own; I often have.
It all depends on your needs (throughput, reliability, recovery, multi-drop, etc).
One not so simple example is SLIP.
If you roll your own, first decision is binary versus text (compactness versus ease of communication, getting all characters through the driver/modem/...).
Whatever you choose, make sure you know to locate the end of each message: either prefix the length, or set a unique terminator (CR and/or LF on text).
Luc Pattyn [Forum Guidelines] [My Articles]
The quality and detail of your question reflects on the effectiveness of the help you are likely to get.
Show formatted code inside PRE tags, and give clear symptoms when describing a problem.
|
|
|
|
|
Hi Experts , getting into the details directly , I'm doing a 3 tier application and I have some questions before I start coding.
1. we have 2 servers one for the database and the other for networking and domain control, since this is a 3 tier application I assumed I have to lay one of the layers on the DC server, BLL layer for example and I'm still confused about the DAL layer if better to locate it on the DC server or on the DB server ?
2. What about ConnectionStrings and References - VisualStudio C# 2008 - , as I'm working on my development laptop , I want to work even when I'm not at work . If I simulate the environment locally can I move it to the real world gently ? and how can I do so ?
Thanks in Advance
|
|
|
|
|
1. The tiers are a conceptual separation, not a separation over servers. May I suggest that you keep both the DAL and the BL on the DB-server? That would save you from writing (secure) communication-code between those layers.
2. Yes. By putting the connectionstring in a configuration file.
I are troll
|
|
|
|
|
I have a scenario where I have three combos. All three are populated with the same data, but use different fields from the data for their display text. The Extension, Name, and Room combos are all populated from the Extension table. If the user selects an extension, the Room and Name combo selections must update to the values for the selected extension. The same if they select a Name, then extension and room get updated.
Often, many extensions are found in one room, or under one name, etc. So now, if the user selects a 'busy' room, what I figure I'll do is filter the extension combo to only those for that room, and give a visual indication of this, maybe a visible link between the combos. If the user decides they wish to ignore the room, and search all extensions, they click a 'clear' entry in extensions, and it loads all the extensions.
Is this a feasible way of doing this? Are there any established patterns for scenarios like this?
|
|
|
|
|
We do something similar except we use check boxes to determine whether or not to link the combos. The check boxes provide the visual feedback so that the user knows whether or not they're seeing filtered data and at the same time allows them to control whether or not they want to see filtered data.
I don't know of any established patterns for this but it really doesn't take that much to implement a solution.
|
|
|
|
|
Hi,
I'm modeling a tagging system, like my own html, for an application... and this is what I have till now:
class Tag:
+Tag(string) //example new Tag("<i>...</i> ... <s>...</s>")
+string Name //for example "b" (for a tag which is used like <b>..</b>)
+string Content //example "<i>...</i> ... <s>...</s>"
+Tag[] Tags //the subtags used within the content of the tag, in the example above it would return the tags t1 and t2 (i and s)
But i need more ideas before getting into the code so I dont get a headache within the process
Thanks.
|
|
|
|
|
Also somehow I need to have a list of possible tags, for the parsing -private- method..
Maybe another class, TagAnalyzer?
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
![Badger | [badger,badger,badger,badger...]](https://www.codeproject.com/script/Forums/Images/badger.gif)
![Badger | [badger,badger,badger,badger...]](https://codeproject.global.ssl.fastly.net/script/Forums/Images/badger.gif)