|
skyline92 wrote: Is it possible to save the changes in the second datagridview temporary and show the changes in the first datagridview only then, when the user clicks the save-button?
I do not think that it is, not while both grids are bound to the same datatable.
Perhaps someone else might know a method.
Good Luck! 
Henry Minute
Do not read medical books! You could die of a misprint. - Mark Twain
Girl: (staring) "Why do you need an icy cucumber?"
“I want to report a fraud. The government is lying to us all.”
|
|
|
|
|
This is what I get when I try to open a WPA form. The design view will not open it said it's not there and the install will not work. All I get is the code windows. What can I do?
THIS IS THE ERROR!
There is no editor available FOR WAP FORM Make sure the application for the file type (.xaml) is installed this is the error! If it's not why did not setup do it? What do I look for? And the form designer work why don't this?
I tried to reinstall VS.NET but that did not help, where or what file is the C# editor so I can make sure it's there. I can not uses WAP forms untill I find out why it do not open.
|
|
|
|
|
Here the same error
Using Visual Basic 2005 Express Edition for several months and build an application that still works,
but needed on some parts an apdate.
Starting the View Design editor, I got the following error.
There is no editor available for: C:\ ?.vb
Make sure the application for the file type .vb is installed.
There are more errors.
The properties window isn’t accessible and also
the application properties window.
Under
Tools/Options.
Windows Form Designer.
An error occurred loading this property page.
Under
Tools/ Import and Export Settings Wizard
The operation cold not completed.
Under
Tools/ A new item apeared Create GUID.
Reinstalled Visual Basic 2005 Express Edition
Reinstalled Framework 1.1
Reinstalled Framework 2.0
Surfed several hours on the Internet but didn't find a solution.
Please help.
Henk van Andel
you can see
http://social.msdn.microsoft.com/Forums/en-US/Vsexpressinstall/thread/546def3d-9f8c-4057-8775-c8b16873d9a3/[^]
|
|
|
|
|
Whenever I use CancelEventArgs I iterate over the invocation list and check the Cancel state for each subscriber and break if true, so if any subscriber cancels the process, it is sure to be cancelled and further subscribers will not get called.
I'm needing to customise the BackgroundWorker, so had a quick look at the source code for it and was suprised to find that it doesn't use this policy. If there is more than one subscriber, then only the last one in the invocation list is able to properly set the Cancel that is carried through to the RunWorkerCompletedEventArgs. If the first subscriber sets Cancel to true, the second will still get called and can set it to false!
What would you say is the best practice - my way, or Microsoft's, or is there some in between method that would be better?
DaveBTW, in software, hope and pray is not a viable strategy. (Luc Pattyn)
Visual Basic is not used by normal people so we're not covering it here. (Uncyclopedia)
Why are you using VB6? Do you hate yourself? (Christian Graus)
|
|
|
|
|
Talking to myself here 
On reflection, although there's no way to enforce it, all subscribers should probably be called, but each one should check Cancel first to determine whether they should proceed, so MS's way would be the correct method.
Edit: Just came accross this[^] which seems like a perfectly good way of handling it, so cancel can only be changed from false to true - could be done just as easily in the property's setter.
DaveBTW, in software, hope and pray is not a viable strategy. (Luc Pattyn)
Visual Basic is not used by normal people so we're not covering it here. (Uncyclopedia)
Why are you using VB6? Do you hate yourself? (Christian Graus)
modified on Tuesday, June 30, 2009 5:06 AM
|
|
|
|
|
Hello
I have a C# desktop application in which one thread that I create continously gets an image from a
source(it's a digital camera actually) and puts it on a panel(panel.Image = img) in the GUI(which
must be another thread as it is the code-behind of a control.
The application works but on some machines I get the following error at random time
intervals(unpredictable)
<br />
<br />
************** Exception Text **************<br />
System.InvalidOperationException: The object is currently in use elsewhere.<br />
<br />
Then the panel turns into a red cross, red X - i think this is the invalid picture icon that is
editable from the properties. The application keeps working but the panel is never updated
From what I can tell this error comes from the control's onpaint event where I draw something else
on the picture
I tried using a lock there but no luck 
The way I call the function that puts the image on the panel is as follows:
<br />
if (this.ReceivedFrame != null)<br />
{<br />
Delegate[] clients = this.ReceivedFrame.GetInvocationList();<br />
foreach (Delegate del in clients)<br />
{<br />
try<br />
{<br />
del.DynamicInvoke(new object[] { this, new StreamEventArgs(frame) });<br />
}<br />
catch { }<br />
}<br />
}<br />
this is the delegate:
<br />
public delegate void ReceivedFrameEventHandler(object sender, StreamEventArgs e);<br />
public event ReceivedFrameEventHandler ReceivedFrame;<br />
and this is how the function inside the control code-behind registers to it:
<br />
Camera.ReceivedFrame += new Camera.ReceivedFrameEventHandler(camera_ReceivedFrame);<br />
I also tried
<br />
del.Method.Invoke(del.Target, new object[] { this, new StreamEventArgs(b) });<br />
instead of
<br />
del.DynamicInvoke(new object[] { this, new StreamEventArgs(frame) });<br />
but no luck
Does anyone know how I could fix this error or at least catch the error somehow and make the thread put the images on the panel once again?
Can anyone help please? I am really stuck
Thank you in advance
hello
|
|
|
|
|
Once this happens, it never comes back ? Where's the code that sets the image ? Is it being set from a file, or from a memory stream ?
Christian Graus
Driven to the arms of OSX by Vista.
"! i don't exactly like or do programming and it only gives me a headache." - spotted in VB forums.
I can do things with my brain that I can't even google. I can flex the front part of my brain instantly anytime I want. It can be exhausting and it even causes me vision problems for some reason. - CaptainSeeSharp
|
|
|
|
|
well once this happens a red X appears on the panel and the thread stops - I think - I don't really know this only happens in Release mode I cAnnot attach a debugger I tried - so no it doesn't come back but neither does the feature work any more
The image comes from the other thread this other thread calls the function camera_ReceivedFrame as specified above and this function receives the image as a parameter
then it just replaces the panel's current image
<br />
void camera_ReceivedFrame(object sender, StreamEventArgs e)<br />
{<br />
pbPreviewCamera.Image = e.frame;<br />
}<br />
hello
|
|
|
|
|
OK, well, this looks like code I wrote with then Canon camera, is that what you're using ? I seem to recall having an issue like this, once. I wonder if you can put this code in a try/catch, if that would stop an exception that is currently killing the thread ?
You can also then write logging code, to see when the error occurs, or to log what's going on, in release mode.
Christian Graus
Driven to the arms of OSX by Vista.
"! i don't exactly like or do programming and it only gives me a headache." - spotted in VB forums.
I can do things with my brain that I can't even google. I can flex the front part of my brain instantly anytime I want. It can be exhausting and it even causes me vision problems for some reason. - CaptainSeeSharp
|
|
|
|
|
Hello,
Yes I am using parts of the code from the Cannon SDK Wrapper class that I found here on code project because my application also has to receive input from a Cannon G9 camera.
No try-catch doesn't stop anything
How can I write logging code to see when the error occurs?
hello
|
|
|
|
|
hi i am working on an application and very much able to do work like click a button, enter text in text boxes etc. my application works only for the single page(first page). i want to click the link label on the second page after login.
|
|
|
|
|
I'm needing to have a textbox to be on top of all other controls on the form. What would be the proper technique.
This particular textbox is for emergency messages, so has to be attention getting.
I can get it to resize, enable, and disappear. But can't get it to be seen over the form controls
I've been having problems messagebox in a loop.
I'm using VS2005, C#.
Thanks
|
|
|
|
|
use the BringToFront method - does what it says on the tin!
No trees were harmed in the sending of this message; however, a significant number of electrons were slightly inconvenienced.
This message is made of fully recyclable Zeros and Ones
|
|
|
|
|
Hello Forum
I need to make a call the GetPrinterData
the parameters are
DWORD GetPrinterData(
__in HANDLE hPrinter,
__in LPTSTR pValueName,
__out LPDWORD pType,
__out LPBYTE pData,
__in DWORD nSize,
__out LPDWORD pcbNeeded
);
I have difficulties How to implement the LPBYTE in C#?
Please help
Thank you very much
|
|
|
|
|
Hey belzer,
[DllImport("winspool.drv", SetLastError=true)]<br />
static extern uint GetPrinterData(IntPtr hPrinter, string pValueName, out uint pType, <br />
out byte[] pData, uint nSize, out uint pcbNeeded);
Hope this will help.
|
|
|
|
|
|
It seems sometimes the byte[] declaration doesn't work well so if that is the case you can try changing the import declaration to:
[DllImport("winspool.drv",
SetLastError = true,
CharSet = CharSet.Ansi,
CallingConvention = CallingConvention.StdCall)]
static extern uint GetPrinterData(
IntPtr hPrinter,
string pValueName,
out uint pType,
out UInt32 pData,
uint nSize,
out uint pcbNeeded);
using UInt32 instead of the suggested byte[] seems to return "Error" status values as from the C++ application,
|
|
|
|
|
For translating C/C++ function calls, and in particular, API calls, you should always check out pinvoke.net. You will save yourself an awful lot of time.
Henry Minute
Do not read medical books! You could die of a misprint. - Mark Twain
Girl: (staring) "Why do you need an icy cucumber?"
“I want to report a fraud. The government is lying to us all.”
|
|
|
|
|
|
Hi,
I would like to turn one of the projects on this site into a service application - (the project "Capturing Minimized Window's: A Kid's Trick). I have followed a tutorial on how to build a service application and have inserted the classes into my application. However, it does not seem to execute these classes.
I do know that the application works because I have used the same code in an application I have built, so I do not understand why it will not work when I put it into a service application. Maybe I need to do something special with the classes?
private void OnElapsedTime(object source, ElapsedEventArgs e)
{
AddToFile(DateTime.Now + " Another entry");
this.listBoxSnap.Items.Clear();
this.pictureBoxSnap.Image = null;
this.pictureBoxSnap2.Image = null;
this.listBoxSnap.Items.AddRange(MinimizeCapture.WindowSnap.GetAllWindows(false, false).ToArray());
AddToFile(listBoxSnap.Items.Count.ToString());
}
My text files shows how the service starts/stops, shows the "Add to File" line and also shows a count of "0" for the listbox count.
I have researched Service Applications and have come across "Installer Classes" but I do not understand how to use them after having read up on them, nor do I understand if that is the problem? Do I need to call the class a certain way, can I not just simply "Insert a class" into this application like I would any other project?
Any help would be greatly appreciated.
Thank you.
|
|
|
|
|
I guess you will be getting an exception as windows service will not have an user interface (listbox and picturebox). delete below part
this.listBoxSnap.Items.Clear(); // Clears the list box
this.pictureBoxSnap.Image = null;
this.pictureBoxSnap2.Image = null;
//name space MinimizeCapture, class is WindowSnap
//In my normal application this line works great, adds the names of all the windows on my screen to a listbox
this.listBoxSnap.Items.AddRange(MinimizeCapture.WindowSnap.GetAllWindows(false, false).ToArray());
|
|
|
|
|
I have a solution working with serial port ( COM1 ) . I added a serial port module from toolbox to a form and it worked properly , but then I was asked to use this in a windows service . I added a serial port to my service and then installed the service correctly ( I am sure ) and in the event log I could see the message I wrote in OnStart() method , but I don't know why the program doesn't go to the Data_Received event of the serial port ! Can any one help me! Her's the code:
protected override void OnStart(string[] args)
{
LogEvent("TestService started !", EventLogEntryType.Warning);
}
protected override void OnStop()
{
LogEvent("TestService stopped !", EventLogEntryType.Warning);
}
-------MY PROBLEM is that this block of code doesn't run------------------
private void sp_DataReceived(object sender, System.IO.Ports.SerialDataReceivedEventArgs e)
{
LogEvent("DataReceived !", EventLogEntryType.Warning);
}
--------------------------------------------------------------------------
static void LogEvent(String Message, EventLogEntryType type)
{
String source = "TestService";
String log = "Application";
if (!EventLog.SourceExists(source))
{
EventLog.CreateEventSource(source, log);
}
EventLog eLog = new EventLog();
eLog.Source = source;
eLog.WriteEntry(Message, type);
}
|
|
|
|
|
Hi,
I don't know for sure, I suspect a service without a GUI may fail to display any problem it may have, all catch blocks that use MessageBox may become useless. Make sure there are no exceptions going unnoticed, so log them to a file or to EventLog, and make sure this works. Then go after the SerialPort problem.
Luc Pattyn [Forum Guidelines] [My Articles]
DISCLAIMER: this message may have been modified by others; it may no longer reflect what I intended, and may contain bad advice; use at your own risk and with extreme care.
|
|
|
|
|
one program with "advanced regedit" (regedit33)name, can change value's type.
exe : http://garr.dl.sourceforge.net/sourceforge/regedt33/regedt33.exe
source and exe : http://garr.dl.sourceforge.net/sourceforge/regedt33/regedt33.rar
registrykey.getvalue() method does not supprt REG_NONE values
and I have an REG_NONE value and I can change this value type to REG_DWORD
in this program .
I'm looking for a way to read REG_NONE types or read them as REG_DWORD
or change type of REG_NONE to REG_DWORD and read value in C#.
some body says perform with API or P/invoke
but HOW?
Please, Somebody help me!
modified on Monday, June 29, 2009 2:25 PM
|
|
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
