Re: How Do I Print a file with Epson T88IV quickly? - .NET (Core and Framework) Discussion Boards

Re: "Make sure you have not released a resource before attempting to use it". HELP!!!!

led mike19-Jun-09 5:28

19-Jun-09 5:28

Don't post VB trash outside the VB forums and then vote down someone like Pete when he provides you with freely given advice.

Creating primary key constraints on a table using VB.NET

sivakumar.mariappan17-Jun-09 21:05

sivakumar.mariappan

17-Jun-09 21:05

Hi,

I have developed a code to create a ms-access table through VB.NET as mentioned below.

ADOXtable = New ADOX.Table
ADOXtable.Name = "ACN_CHARX_INSTANCE"
ADOXtable.Columns.Append("LOGICAL_DB_NAME", ADOX.DataTypeEnum.adVarWChar, 32)
ADOXtable.Columns.Append("DIM_NAME", ADOX.DataTypeEnum.adVarWChar, 32)
ADOXtable.Columns.Append("CHARX_NAME", ADOX.DataTypeEnum.adVarWChar, 128)
ADOXtable.Columns.Append("CHARX_TABLE", ADOX.DataTypeEnum.adVarWChar, 128)
ADOXtable.Columns.Append("CHARX_VALUE_COL", ADOX.DataTypeEnum.adVarWChar, 128)
ADOXtable.Columns.Append("VALUES_UNIQUE", ADOX.DataTypeEnum.adInteger)
ADOXtable.Columns.Append("CHARX_ORDER_COL", ADOX.DataTypeEnum.adVarWChar, 128)
ADOXtable.Columns.Append("CHARX_ORDER", ADOX.DataTypeEnum.adInteger)
ADOXtable.Columns.Append("CHARX_NUMERIC_COL", ADOX.DataTypeEnum.adVarWChar, 128)
ADOXtable.Columns.Append("BITMAP_COL", ADOX.DataTypeEnum.adVarWChar, 128)

cat.Tables.Append(ADOXtable)

Now i want to set primary key constraints for this table through coding. Please share your ideas...

Thanks,
Sivakumar.M.

Re: Please Ignore [Cross Post]

Aman Bhullar18-Jun-09 2:37

Aman Bhullar

18-Jun-09 2:37

Please ignore..

http://www.codeproject.com/Forums/1725/General-Database.aspx?fid=1725&select=3086066#xx3086066xx[^]

Regards
Aman Bhullar
www.arlivesupport.com[^]

How many primary key constraints can we have in a table of ms-access?

sivakumar.mariappan17-Jun-09 20:57

sivakumar.mariappan

17-Jun-09 20:57

Hi,

How many primary key constraints can we have in a table of ms-access? Any other constraints available in ms-access other than primary key?

Please share your ideas...

Thanks,
Sivakumar.M.

Re: How many primary key constraints can we have in a table of ms-access?

Colin Angus Mackay17-Jun-09 22:58

Colin Angus Mackay

17-Jun-09 22:58

This question has nothing to do with .NET. Please ask in the Database forum.

Re: How many primary key constraints can we have in a table of ms-access?

DoctorMick18-Jun-09 1:11

DoctorMick

18-Jun-09 1:11

For all its in the wrong forum.....

How many primary key constraints can you have in any database table? That'll be one, although the primary key can be made up multiple columns.

How Do I Print a file with Epson T88IV quickly? [modified]

Member 239059517-Jun-09 18:53

Member 2390595

17-Jun-09 18:53

Hi everyone,
Now I have a Crystal Report file, and I print this file with Epson T88IV. But it prints so slowly.
When I type a Print Command in Commandline of Windows to print a Text File, It prints immediately. But It can print Unicode Text. It prints ASSCII only.

My print command
Print D:\temp.txt /d:com1

Can I print a Crystal Report File immediately? How Do I Do?

Thanks so much.

modified on Thursday, June 18, 2009 1:25 AM

Re: How Do I Print a file with Epson T88IV quickly?

Aman Bhullar18-Jun-09 2:42

Aman Bhullar

18-Jun-09 2:42

Practically speaking you cannot print the crystal report in ASCII format.

The system sent the output to the printer in form of Image.

But when you send the same request from DOS prompt, the data is send as ASCII

Regards
Aman Bhullar
www.arlivesupport.com[^]

Re: How Do I Print a file with Epson T88IV quickly?

Member 239059518-Jun-09 22:49

Member 2390595

18-Jun-09 22:49

Thanks for you reply.
Can you show me How Do I print it with UniCode font so Quickly?

I know when I use a print dialog in another software, firstly It converts my text to image and then the printer work.

If I convert Text to image then I Print a image file. Does it print immediately?

Thanks.

Re: How Do I Print a file with Epson T88IV quickly?

Aman Bhullar19-Jun-09 6:18

Aman Bhullar

19-Jun-09 6:18

We solved this problem once. But we were not using the Crystal report
But you can give the try

We used a grid control.. format it and then send it to the printer.
We never submit the document to the normal printer. But try to install 9-Pin IBM printer, set it as default printer and submit the document to this printer.

Any how this solved our problem

Regards
Aman Bhullar
www.arlivesupport.com[^]

.Net Date Compare

Tristan Rhodes17-Jun-09 3:28

Tristan Rhodes

17-Jun-09 3:28

Hi Guys,

I've got some dates i'm storing in a database and XML file, and when i read them out and compare them to the origional date that remained in code, they return false due to a loss in precision.

Is there any easy way to compare dates with a certain precision comparison? Or trim the precision on dates in code? The ones i have go all the way down to the milliseconds.

Cheers

Tris

-------------------------------

Carrier Bags - 21st Century Tumbleweed.

Re: .Net Date Compare

Luc Pattyn17-Jun-09 3:39

Luc Pattyn

17-Jun-09 3:39

Hi,

DateTime.Date sets you back to midnight, which is fine for a timeless date compare.

Smile | :)

Luc Pattyn [Forum Guidelines] [My Articles]

DISCLAIMER: this message may have been modified by others; it may no longer reflect what I intended, and may contain bad advice; use at your own risk and with extreme care.

Re: .Net Date Compare

Baran M17-Jun-09 3:50

Baran M

17-Jun-09 3:50

ya I have tried it. Its perfect

DateTime d1 = DateTime.Today;
DateTime d2 = DateTime.Today.AddMilliseconds(1);
if (d1.Date.CompareTo(d2.Date) == 0)
{
Response.Write("Ya its equal");
}
else
{
Response.Write("No its not equal");
}

Education is not a way to escape poverty — it is a way of fighting it.

Re: .Net Date Compare

Tristan Rhodes17-Jun-09 10:40

Tristan Rhodes

17-Jun-09 10:40

Thanks Luc, is there any way to do date and time, without the MS? It's just possible that there might be multiple values for the same day, so that's not really fine grain enough for me!

-------------------------------

Carrier Bags - 21st Century Tumbleweed.

Re: .Net Date Compare

Luc Pattyn17-Jun-09 10:48

Luc Pattyn

17-Jun-09 10:48

Hi,

it all depends on what you want exactly.

1.
if parts of the DateTime should be identical, then check those parts, as in:

DateTime dt1=...;
DateTime dt2=...;
if (dt1.Date==dt2.Date && dt1.Hours==dt2.Hours) isSufficientlyEqual();

the problem now is that 16:59:59 would equal to 16:00:00 and not to 17:00:00 which is much closer!

2.
if time distance is important, calculate it

DateTime dt1=...;
DateTime dt2=...;
if (dt1.Date==dt2.Date) {
    float seconds=dt1.Subtract(dt2).TotalSeconds;
    if (seconds>-100 && seconds<100) isSufficientlyClose();
}

3.
Up to the second equal:

DateTime dt1=...;
DateTime dt2=...;
if (dt1.AddMilliseconds(-dt1.MilliSeconds)==dt2.AddMilliseconds(-dt2.MilliSeconds)) {
    isPrettyClose();
}

Luc Pattyn [Forum Guidelines] [My Articles]

DISCLAIMER: this message may have been modified by others; it may no longer reflect what I intended, and may contain bad advice; use at your own risk and with extreme care.

Re: .Net Date Compare - Code Clean Up, Use an Extension Method for DateTime

ProtoBytes17-Jun-09 12:23

ProtoBytes

17-Jun-09 12:23

Once you have arrived at the desired formater, create an extension method(s) for the Date Time class. This will clean up any code complexities introduced.

Some Formating and Parsing Tips[^]

Some DateTime Extension Method Examples[^]

Re: .Net Date Compare - Code Clean Up, Use an Extension Method for DateTime

Tristan Rhodes17-Jun-09 22:51

Tristan Rhodes

17-Jun-09 22:51

That's a nice idea! Something to stick in the Common Lib. ^^

-------------------------------

Carrier Bags - 21st Century Tumbleweed.

Re: .Net Date Compare

Tristan Rhodes17-Jun-09 22:53

Tristan Rhodes

17-Jun-09 22:53

Ah, i was wondering if there was a existing or simpler way. I could have done it by now ><

I think between that and some extention methods, i can solve the problem nicely.

Cheers!

-------------------------------

Carrier Bags - 21st Century Tumbleweed.

Re: .Net Date Compare

David Skelly17-Jun-09 22:20

David Skelly

17-Jun-09 22:20

Depending on which database you are using, you may see some loss of precision when you store a datetime (aka timestamp in some databases). SQL Server, for example, does not store datetime values to the exact millisecond. It is only accurate to approximately the nearest 3 milliseconds. So if it is important to get accurate timestamps right down to the exact millisecond, you should avoid the SQL Server datetime datatype.

SQL Server 2008 introduces a new datatype, datetime2, which is accurate to approximately 100ns to get around this problem.

Possible solutions:

- if you are using SQL Server 2008 and have ownership of the database, use datetime2 rather than datetime

- if you are not using SQL Server 2008 or you cannot change the table design and if you do not need millisecond accuracy, decide what accuracy you do need: for example, round off your timestamps to the nearest second before storing them

- if you do need millisecond accuracy, either convert the timestamp to a string format (OK for XML, not good for date functions and the conversion to and from datetime type may be slow) or store the timestamp as the number of milliseconds from the epoch (gives you the accuracy you need at a reasonable performance but not good for date functions)

Re: .Net Date Compare

Tristan Rhodes17-Jun-09 22:56

Tristan Rhodes

17-Jun-09 22:56

I'm not too fussed about the loss of precision, i can deal with the nearest second. But thanks for the input. Is there any easy way to round a date? I've always created new dates and copied the relevant values over before.

-------------------------------

Carrier Bags - 21st Century Tumbleweed.

Re: .Net Date Compare

David Skelly18-Jun-09 4:42

David Skelly

18-Jun-09 4:42

One of the earlier replies from Luc shows you how to do this. Yes, you have to create a new DateTime (it is immutable so once you've created one you can't change it) but there is an easy way to do it using AddMilliseconds. Sounds like a good candidate for an extension method if you're at the right version of .NET. Otherwise, a good old fashioned DateUtils class would do.

Re: .Net Date Compare

PIEBALDconsult18-Jun-09 6:19

PIEBALDconsult

18-Jun-09 6:19

May I humbly recommend DateTruncate[^] ?

Re: .Net Date Compare

Luc Pattyn19-Jun-09 4:25

Luc Pattyn

19-Jun-09 4:25

PIEBALDconsult wrote:
May I humbly recommend DateTruncate?

Waiting for V2.0, with a Compare method added to it. Big Grin | :-D

Luc Pattyn [Forum Guidelines] [My Articles]

DISCLAIMER: this message may have been modified by others; it may no longer reflect what I intended, and may contain bad advice; use at your own risk and with extreme care.

Re: .Net Date Compare

PIEBALDconsult19-Jun-09 4:55

PIEBALDconsult

19-Jun-09 4:55

You'll be waiting a long time if you don't make a request.

I suppose I could make a TimespanTruncate.

Shut Down Local Computer Using VB.NET

shinoopmathew16-Jun-09 22:59

shinoopmathew

16-Jun-09 22:59

Can I Shutdown my local Computer Using VB.Net?
shinoopmathew@gmail.com
009744931401

Use Ctrl+Left/Right to switch messages, Ctrl+Up/Down to switch threads, Ctrl+Shift+Left/Right to switch pages.