|
|
Member 2260473 wrote: 1 Map 1/ Map 2 Node 1
2 Map 5/Map 10 Node 5/ Node 6
3 Map2 Node 7
If that's some sort of a puzzle why do you expect people to try and figure it out?
If it's not a puzzle then it makes no sense so we have no idea what you are trying to do.
led mike
|
|
|
|
|
Hi,
I'm using C# 2.0 to create a popup control derived from the ToolStripDropDown class in order to be able to host any System.Windows.Forms.Control in a popup.
This is working quite well, except for some issues during design-time.
I have a control that opens a popup of the type described above. What I would like to happen in design time, is for the popup to show when the button is selected. I have managed to hook up the selection logic quite easily. Showing the popup correctly, and in a way that allows it to be edited (through its associated ParentControlDesigner-derived designer class) has been a rather nightmarish enterprise so far.
It appears as though the popup cannot be designed properly because its not part of the control hierarchy on the form being designed (it is instead exposed through a Popup property on the control that opens the popup). The popup IS sited.
How do I show the popup in the designer window in a way that will allow it to be edited?
Thanks in advance for any suggestions,
Sincerely,
Danny van Kasteel
If it's worth doing, it's worth doing well
|
|
|
|
|
I recently found an article on MSDN about PropertyGrid Control[^] and wanted to know if there was a SolutionExplorer Control as well?
Dave Henry
-----------------------------------------
evil mastermind or genius benefactor?
NEVER trust the bunny...
|
|
|
|
|
David Henry wrote: if there was a SolutionExplorer Control as well?
Yes. It's called TreeView.
led mike
|
|
|
|
|
led mike wrote: Yes. It's called TreeView.
Yes and if I'd asked about something like the PropertyGrid Control I'm sure you'd have said "Yes. It's called Gridview" but if you had actually looked at the link I gave the PropertyGrid uses reflection to build a control that works EXACTLY the same as the one in VS even if one of your properties is type Image, when the user clicks to edit, it shows an image selector dialog box.
So I'll ask you again and if you don't know just say so don't be a smart arse.
Dave Henry
-----------------------------------------
evil mastermind or genius benefactor?
NEVER trust the bunny...
|
|
|
|
|
David Henry wrote: Yes and if I'd asked about something like the PropertyGrid Control I'm sure you'd have said "Yes. It's called Gridview"
No. Unlike you, I attempt to actually know what I am talking about.
David Henry wrote: the PropertyGrid uses reflection to build a control that works EXACTLY the same as the one in VS even if one of your properties is type Image, when the user clicks to edit, it shows an image selector dialog box.
What does that have to do with SolutionExplorer?
David Henry wrote: So I'll ask you again and if you don't know just say so don't be a smart arse.
First, it's possible you are talking about VS2008 which I have not seen. But it's your thread and you did not specify. Second, if you put Spy++ on the VS2005 SolutionExplorer you would see it is a SysTreeView32.
So either way maybe you should wait until you actual learn how to know things about programming before you start trying to insult other developers on the internet. In the meantime, you can kiss my f***in ass you moron pile of sh*t.
led mike
|
|
|
|
|
led mike wrote: No. Unlike you, I attempt to actually know what I am talking about.
 You're right I feel so ashamed. No wait I don't.  I was just pointing out that your comment was of no help and added nothing to the thread.
led mike wrote: First, it's possible you are talking about VS2008 which I have not seen. But it's your thread and you did not specify. Second, if you put Spy++ on the VS2005 SolutionExplorer you would see it is a SysTreeView32.
No again you have shown that you did not even look at my reference article, I was talking about a control in VS2005. But you're right I should have explained myself fully, as I'm not a C++ programmer I would not have thought to use Spy++ thank you for the tip.
led mike wrote: So either way maybe you should wait until you actual learn how to know things about programming before you start trying to insult other developers on the internet. In the meantime, you can kiss my f***in ass you moron pile of sh*t.
ok now I'm not English but I have a few points for your last tirade.
- You started the preceding paragraph with the word First indicating a number of points, these never appeared.
you should wait until you actual learn how to know things about programming
maybe try :-
you should wait until you actually know something about programming before you start trying to insult other developers
I really don't think calling you a smart arse is such a big deal but
moron pile of sh*t.
 that is a little excessive.you can kiss my f***in ass
 no it is you who can kiss mine.
 And its little exchanges like this, why I don't ask questions here very often.
I'd like to apologize to everyone who has been reading this thread, it's my fault I fed the troll.
Dave Henry
-----------------------------------------
evil mastermind or genius benefactor?
NEVER trust the bunny...
modified on Monday, August 11, 2008 5:16 AM
|
|
|
|
|
David Henry wrote: I really don't think calling you a smart arse is such a big deal but
David Henry wrote: that is a little excessive.
What are you a Republican? You think you are the one that gets to decide what an insult is? You started this bullshit not me. You asked what the SoltionExplorer control was and I told you. All the rest of this bullshit is because of your mouth, and you are not even man enough to know and admit that. F*** off a**hole.
led mike
|
|
|
|
|
I am using Visual c++ NET 2005
In each forms I write down the path of Icon property.
When I load the program, the Icon appear on the left corner of Title bar but in left side of menu bar appears the default icon. I do no where to change this . I need that appears in menu bar a new icon instead of the default.
I need your help.
|
|
|
|
|
You need to set the Image property of the menuitem ![Rose | [Rose]](https://codeproject.global.ssl.fastly.net/script/Forums/Images/rose.gif)
|
|
|
|
|
i have to create dynamic numbers of timers in vb.net , how can i approch it... 
|
|
|
|
|
By dynamic I assume: an unknown amount of timers need to be created during runtime. With that assumption, you will have to have a loop and collection that will store Timer objects. The following is C# pseudocode that may help with clarifying your thoughts:
Collection<timer> colTimersNeeded=new Collection<timer>
for(int i=0;i<amountneeded;>{
Timer t=new Timer();
t.Enabled=true;
...set other timer settings including duration, etc...
t.Tick+=delegate
{
...this is an anonymous method (I am not sure if their is such a thing in VB, if not you can still create a delegate here that will point to another method with proper parameters through EventHandlers). Add what needs to happen in this method....
}
}
Regards,
Thomas Stockwell
Programming today is a race between software engineers striving to build bigger and better idiot-proof programs, and the Universe trying to produce bigger and better idiots. So far, the Universe is winning.
Visit my Blog
|
|
|
|
|
Hi
I have a System.Windows.Forms.TreeView, but I only want to show the checkboxes on som of my nodes!
The ShowCheckBox property exists on TreeNodes for System.Web.UI.WebControls.Treeview, but not on System.Windows.Forms.TreeView.
How do I obtain the same functionality for TreeNodes on System.Windows.Forms.TreeView?
Regards
Troels Timm
|
|
|
|
|
Sorry, did not understand your question correctly.
troelstimm wrote: but I only want to show the checkboxes on som of my nodes!
To show nodes differently you need to use OwnerDraw. I suggest you construct a custom TreeView and add the features you need. You can find many articles here on CodeProject that have used OwnerDraw on TreeView controls for examples. Also there is small example code in the TreeView documentation on MSDN that may help.
You will likely need to to extend TreeViewNode as well so that each node can maintain it's state.
led mike
|
|
|
|
|
Hi
Sorry my mistake, not a clear question
I ONLY want the checkbox on some of my nodes, not all of them.
The reason why I refer to the Web is that it seem to be possible to show/hide the checkbox on the TreeNode class. This is is not available on the Forms.TreeNode.
So how to control showing checkboxes on TreeNodes and not on all nodes (the entire treeview)
Troels
|
|
|
|
|
Dear sir,
We are developing one windows application. In that we have Remember me & Load on startup ( check box )functionalities are there. Both working fine as individual selection. Like if i check the Remember me check box, for the next time login the login form remembered my id & pwd. if i check Load on start up check box, and if restart the system my application is automatically starts up.
problem :
both check box functionalities are not working together. i mean if i check both the check boxes. Application is automatically start up when system starts but the login form does not contain my login id & pwd.
if i check Individually both functionalities working fine.
Please help me. what should i do. To make both work together.
|
|
|
|
|
You would need to post the code that is handling your processing.
Never underestimate the power of human stupidity
RAH
|
|
|
|
|
this is the code we are using for the processing.
// for Application LOAD when we start our machine.
public static bool AutoStart {
get
{
RegistryKey key = Registry.CurrentUser.OpenSubKey(@"Software\Microsoft\Windows\CurrentVersion\Run", true);
string startupValue = (string)key.GetValue("VideoRep");
key.Close();
if (startupValue == null) return false; else return true;
}
set
{
RegistryKey key = Registry.CurrentUser.OpenSubKey(@"Software\Microsoft\Windows\CurrentVersion\Run", true);
if (value)
{
key.SetValue("VideoRep", "\"" + Application.ExecutablePath + "\"");
key.Close();
}
else
{
key.DeleteValue("VideoRep");
key.Close();
}
}
}
// for Remember Me Checkbox functionality.
public static string[] RememberMe
{
get
{
string uname = "";
string pword = "";
if (File.Exists(CONFIG_FILE))
{
BinaryReader binReader = new BinaryReader(File.Open(CONFIG_FILE, FileMode.Open));
try
{
// If the file is not empty, read the application settings.
if (binReader.PeekChar() != -1)
{
uname = binReader.ReadString();
pword = binReader.ReadString();
}
}
catch (Exception) { }
finally { binReader.Close(); }
}
return new string[2] { uname, pword };
}
set
{
if (File.Exists(CONFIG_FILE))
File.Delete(CONFIG_FILE);
if (value != null)
{
try
{
using (BinaryWriter binWriter = new BinaryWriter(File.Open(CONFIG_FILE, FileMode.Create)))
{
binWriter.Write(User.Username);
binWriter.Write(User.Password);
}
}
catch (Exception)
{
}
}
}
}
//checkbox checked events code
private void cbRememberMe_MouseClick(object sender, MouseEventArgs e)
{
if (User.RememberMe[0] != "") User.RememberMe = null; else User.RememberMe = new string[2] { User.Username, User.Password };
}
private void cbLoadStartup_MouseClick(object sender, MouseEventArgs e)
{
if (User.AutoStart) User.AutoStart = false; else User.AutoStart = true;
}
this is process we are doing please give me reply, what should i do to make both functionalities work together.
|
|
|
|
|
I am having the strangest problem. When I open up a form, it gives me the following error.
Warning 1 Could not find file 'C:\Program Files\Microsoft Visual Studio 8\Common7\IDE\yeshivot.mdb'
It is important to note that my app is working ok, but that the error comes when I open up the form in Visual Studio which. Now I went into the config file, and it says that it is pulling the file from datadirectory which I guess stumps me. I did see that the directory does exist, and that I could put the file in there and forget about it. However to me that would just seem like not really dealing with the problem. Where is DataDirectory defined? Why isn't it the directory where my app is being developed? And one more thing that is perhaps the most strange of all is that I don't own Visual Studio 8. I am using 2005.
Please enlighten me someone.
|
|
|
|
|
bfis108137 wrote: And one more thing that is perhaps the most strange of all is that I don't own Visual Studio 8. I am using 2005.
VS2005 is Visual Studio 8. On the Help menu choose the last menu entry "About Microsoft Visual Studio".
led mike
|
|
|
|
|
I guess you are right but that doesn't help me with that issue I was dealing with. I have however cheated and copied the database to that location and it works now. I would like some clarity on why my database needs to be there and not in the app folder.
|
|
|
|
|
I am trying to populate the drowdown list of a combobox in the dropdown event with the list of sqlserver but when i click the dropdown button the list populates, shows briefly and then closes.
What can i do to prevent this from happening.
Please help.
I tryied with this code but no luck.
private List<string> GetSqlServers()
{
List<string> resultList = new List<string>();
DataTable dtServers = SqlDataSourceEnumerator.Instance.GetDataSources();
foreach (DataRow row in dtServers.Rows)
{
if (row["InstanceName"] != DBNull.Value)
resultList.Add(row["ServerName"].ToString() + "\\" + row["InstanceName"].ToString());
else
resultList.Add(row["ServerName"].ToString());
}
return resultList;
}
private void cmbServers_DropDown(object sender, EventArgs e)
{
if (cmbServers.Items.Count == 0)
{
cmbServers.Items.Clear();
cmbServers.Items.AddRange(GetSqlServers().ToArray());
}
}</string></string></string>
|
|
|
|
|
Have you ever heard of DataBinding? I suggest you do some reading on the subject. I would bet there are many articles here on CodeProject covering that subject like this one for example[^]. Look in the "CHAPTERS" items on the site menu.
led mike
|
|
|
|
|
My problem is that SqlDataSourceEnumerator.Instance.GetDataSources(); return a DataTable with more than one column.
I want to show to the user [ServerName] if [InstanceName] is null or
[ServerName]\[InstanceName] if not.
That is why i didn't use data binding.
Ok i can bind the result of GetSqlServers() method in the dropdown event of the combobox but my initial problem does not dissapear.
I want it to populate in the dropdown event because it takes a long time and i don't want it to run unless the user clicks dropdown otherwise he can just edit the server name in the combobox.
The problem is that after the list is populated it is automatically closed. How can i prevent that to happen.
Please help.
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
