|
Hi Anoop,
Please follow the below mentioned steps:
Step 1) Make sure SQL SERVER is up and the instance you try to connect is running.
Step 2) Your system Firewall should not block SQL Server port.
Step 3) Go to Computer Management >> Service and Application >> SQL Server 2005 Configuration >> Network Configuration
Enable TCP/IP protocol. Make sure that SQL SERVER port is by Default 1433.
Step 4) Now follow this KB Article of MSDN depending on your server : http://support.microsoft.com/default.aspx?scid=kb;EN-US;914277
You may also take a look at the following link of Microsoft Forum.
http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=147346&SiteID=1[^]
I hope this helps  .
Regards,
John Adams
ComponentOne LLC
|
|
|
|
|
Hi John
Thanks for you suggestions...
i tried those but still didn't work..
after some investigation i discovered that the connectionstring was not correct.
it should have read...
"Data Source=ANOOPNB\SQLEXPRESS;Initial Catalog=MYDB;Persist Security Info=True;User ID=sa;Password=sa"i used the vs2005 wizard under the settings menu to get this.
this solved the problem for me...
thank you so much though!
Anoop 
|
|
|
|
|
I am working on a project that generates reports via SSRS, and i am having the following problem. for the LoadReport method, i am using "/temp" for the report path. i have placed a "temp" folder every place on the server i can imagine to help the service "find" it, but I keep getting this error:
The item '/temp' cannot be found. ---> The item '/temp' cannot be found.
here is the stack trace:
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. <br />
<br />
Exception Details: System.Web.Services.Protocols.SoapException: The item '/temp' cannot be found. ---> The item '/temp' cannot be found.<br />
<br />
Source Error: <br />
<br />
<br />
Line 227: [return: System.Xml.Serialization.XmlElementAttribute("executionInfo")]<br />
Line 228: public ExecutionInfo LoadReport(string Report, string HistoryID) {<br />
Line 229: object[] results = this.Invoke("LoadReport", new object[] {<br />
Line 230: Report,<br />
Line 231: HistoryID});<br />
<br />
<br />
<br />
<br />
Stack Trace: <br />
<br />
<br />
[SoapException: The item '/temp' cannot be found. ---> The item '/temp' cannot be found.]<br />
System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall) +551452<br />
System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters) +204<br />
<br />
<br />
ANy idea? This is my SSRS project, and outside of this little roadblock, it is moving along beautifully.
______________________
Mr Griffin, eleventy billion is not a number...
|
|
|
|
|
The report path should be the full path to the report relative to the root folder, including the name of the report itself. You appear to have just specified the name of the folder the report resides in and not the name of the report itself. If you don't specify the name of the report, how can the report server know what report you want to load?
Paul Marfleet
"No, his mind is not for rent
To any God or government"
Tom Sawyer - Rush
|
|
|
|
|
Hi,
I'm exporting my report to Excel and there are colums missing ! Specifically columns where visibility is conditional. I can see them on the server, where they appear and disappear corrdctly. Is excel just copying each page or is it trying to be cleverer than that?
I just want what I can see exporting to Excel, that's not what is happening.
Thanks in Advance.
Harvey
|
|
|
|
|
how to insert null to an EMPTY cell in SQL SERVER...
i.e, in a field, i enter some values and deleted it. so, it is considered as EMPTY field and not null. i need a query to make that field <NULL>
can anyone help me? - KARAN
|
|
|
|
|
UPDATE <tablename> <br />
SET <col> = NULL <br />
WHERE LEN(<col>) = 0 </col></col></tablename>
this works for string data
even recollect reading IsEmpty() function in SQL Server
you may even try with this. I've never used this function.
Regards
KP
|
|
|
|
|
UPDATE TableA SET ColA = NULL <br />
WHERE LEN(ColA) = 0 <br />
this works for string data
even recollect reading IsEmpty() function in SQL Server
you may even try with this. I've never used this function.
Regards
KP
|
|
|
|
|
thanks a lot krish-KP... can i have it for DATETIME field also? i.e.. when the DATETIME field is EMPTY or 1/1/1900, it should be of <null>. how to achieve it? - KARAN
|
|
|
|
|
This solution is when you are manually putting data in the fields rom enterprise manager.
Just click on the cell and do " control 0 ".
That is press control key and zero.
this will get NULL value in the empty field.
-Naina
--Here 2 See Sharp--
I have not failed. I've just found 10,000 ways that won't work. 
|
|
|
|
|
thanks seesharp...but i need it programmatically
|
|
|
|
|
Hi,
I have a requirement to select the starting date and ending date of a month if I give a particular date as a parameter. HOw to do that? For eg>
If I give the select statement as below:
select startdate, enddate from <tablename> where particulardate = '17/03/2008'. If I execute this query, I should get the start date as '01/03/2008' and end date as '31/03/2008'
HOw to achieve this in SQL Server? Pls help
Regards
meeram.
Meeram395
|
|
|
|
|
Getting End Date
1. Add 1month to the given date taking 1st day and year of given date
2. which returns 1st of next month from given date
3. subtract 1day which returns last day of given month
DECLARE @GivenDate AS DateTime<br />
SET @GivenDate = GetDate()<br />
SELECT DateAdd(DD, -1, DateAdd(MM, 1, Cast(Month(@GivenDate) AS VarChar(2)) + '/01/' + Cast(Year(@GivenDate) AS VarChar(4))))
Getting Start date
similar to the end date take day as 1 with month & year from given date
Regards
KP
|
|
|
|
|
Thank you very much
Meeram395
|
|
|
|
|
hi,
i have three fields in the database table
p1 p2 rank
10% 20% 3
21% 40% 2
now i am passing the input as 15%...this 15% is related to 3rd rank.. so i need the o/p rank as 3..
if the p1 and p2 datatypes are varchar..then how we can we write the query for that one tgo get the rank as 3.
Ramesh
|
|
|
|
|
You haven't explained why a rank of 3 should be returned for 15% However I assume this is because 15% is between 10 and 20%. In this case, you shoul use the BETWEEN clause in your query.
Why are you storing percentages in varchar fields? They are numbers, so they should be stored in numeric fields. You will run into problems every time you want to do numeric comparisons because you will need to case your varchar values to numbers.
Paul Marfleet
"No, his mind is not for rent
To any God or government"
Tom Sawyer - Rush
|
|
|
|
|
select rank from table where input between P1 and P2
--Here 2 See Sharp--
I have not failed. I've just found 10,000 ways that won't work.
|
|
|
|
|
Hello..
I've got an InvalidOperationException: invalid Value vor the OracleObjectMappingAttribute nNR
Could NET have a problem with casting NUMBER to int? Or have i to do something
special, because I'm using a OUT-only Parameter?
Here are my code:
PLSQL:
-------------
create type TESTOBJ as OBJECT (
nNR NUMBER;
sTEXT VARCHAR2(20);
)
create testproc(p_testobj OUT TESTOBJ)
as
v_testobj TESTOBJ := TESTOBJ(1,'Test');
begin
p_testobj := v_testobj;
end;
C# the Mapped OBj:
-------------------------------
public class OracleXTBQueueObj : IOracleCustomType
{
private int nr;
[OracleObjectMappingAttribute("nNR")]
public int NR {
get { return nr; }
set { nr = value; }
}
private string tEXT;
[OracleObjectMappingAttribute("sTEXT")]
public string TEXT
{
get { return tEXT; }
set { tEXT = value; }
}
public virtual void FromCustomObject(OracleConnection con, IntPtr pUdt)
{
OracleUdt.SetValue(con, pUdt, "nNR", this.NR);
OracleUdt.SetValue(con, pUdt, "sTEXT", this.TEXT);
}
public virtual void ToCustomObject(OracleConnection con, IntPtr pUdt)
{
this.NR = ((int)(OracleUdt.GetValue(con, pUdt, "nNR")));
this.TEXT = ((string)(OracleUdt.GetValue(con, pUdt, "sTEXT")));
}
}
C# the Factory:
-------------------------------
[OracleCustomTypeMappingAttribute("USR.TESTOBJ")]
public class OracleXTBQueueObjFactory : IOracleCustomTypeFactory
{
public IOracleCustomType CreateObject()
{
OracleXTBQueueObj obj = new OracleXTBQueueObj();
return obj;
}
}
C# the function, callin the PROCEDURE:
------------------------------------------------------------
public static void GetOO(OracleConnection conn)
{
OracleCommand cmd = new OracleCommand("UDT_TESTPROC", conn);
cmd.CommandType = System.Data.CommandType.StoredProcedure;
OracleParameter paramDaten = new OracleParameter("p_testobj", OracleDbType.Object, ParameterDirection.Output);
paramDaten.UdtTypeName = "USR.TESTOBJ";
cmd.Parameters.Add(paramDaten);
try { cmd.ExecuteNonQuery(); }
catch (Exception ex) //InvalidOperationException
{
Console.Out.WriteLine(ex.Message)
}
Console.In.ReadLine();
paramDaten.Value.ToString();
}
-----
Hope somebody can help me
thx in advance
faehne
|
|
|
|
|
I am working on a report which requires me to draw two polygons (rectangles) on a scatter chart to visually indicate "good" and "bad" ranges of plotted data. Is there a way to do this out-of-the-box?
Otherwise, if I must create a custom report item, how do I draw on the chart surface? I have looked at the following articles on Custom Report Items, but when I open the sample solutions I can't put the custom report items on the chart surface.
http://blogs.msdn.com/chrishays/default.aspx
[^]
http://msdn2.microsoft.com/en-us/magazine/cc188686.aspx[^]
Do I have to create a custom report item which inherits from a chart control? If so, does anyone have any reference samples?
|
|
|
|
|
I have used the Dundas Chart for Reporting Services component to solve a similar problem, i.e. applying custom rendering to a Reporting Services chart. The Dundas Chart component exposes a PostPaint event which allows a developer to draw onto the chart surface area. Code is written against the chart control in C#.
The component isn't cheap, but it does open up new possibilities for charting with Reporting Services. It is especially useful when you need to apply your own customizations to a chart that don't come out of the box.
Paul Marfleet
"No, his mind is not for rent
To any God or government"
Tom Sawyer - Rush
|
|
|
|
|
Thanks, that's one of the solutions I am looking at. However, this is the only requirement I have (so far) which doesn't come out of the box. So I'm not sure if I can get approval to purchase a license just so I can draw a couple rectangles. Of course it's beginning to look like my time to develop it myself will cost a lot more than just to license a 3rd party charting solution.
|
|
|
|
|
Something else I have tried in the past is writing a custom assembly in .NET that internally renders a Reporting Services chart. This can be achieved by using the web services that Reporting Services exposes to programmicically render a report. You could develop a report that simply consists of the chart you want to display. If you request this report through the web service, the data for your report will be returned as a byte array. You can create an image from this data and then use the graphics capabilities in the .NET Framework to alter the image to your requirements. You could create a custom component to do all this by following the Microsoft article.
Paul Marfleet
"No, his mind is not for rent
To any God or government"
Tom Sawyer - Rush
|
|
|
|
|
thanks, that's a good idea. I'll give it a shot.
|
|
|
|
|
Hi,
Problem:
I'm using C# 2005. The data type of the bitmap file saved to database is "long binary data". It should be "OLE Object".
Source Code:
Bitmap myBitmap = new Bitmap(@"c:\Picture1.bmp");<br />
OleDbConnection conn = new OleDbConnection("<<My Connection String>>");<br />
conn.Open();<br />
string sql = "UPDATE Table1 SET fldOLE = @fldOLE WHERE fldID = 5";<br />
OleDbCommand command = new OleDbCommand(sql, conn);<br />
command.Parameters.Add(new OleDbParameter("@fldOLE", myBitmap));<br />
int rowsAffected = command.ExecuteNonQuery();
Question:
How can I save Bitmap to database with data type "OLE Object"?
Thanks in advance
|
|
|
|
|
Please don't cross post.
Christian Graus - Microsoft MVP - C++
"also I don't think "TranslateOneToTwoBillion OneHundredAndFortySevenMillion FourHundredAndEightyThreeThousand SixHundredAndFortySeven()" is a very good choice for a function name" - SpacixOne ( offering help to someone who really needed it ) ( spaces added for the benefit of people running at < 1280x1024 )
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
