|
actually i work in visual studio 6.0 and here, three necessary dlls are required.these dlls should be placed in the same folder as the exe file.
MFC42D.DLL
MFCO42D.DLL
MSVCRTD.DLL
as far as i know, the same logic should apply for vc++ 2003 also.
but some more files may or may not be required.
to find them out,
1.run your exe in a separate system, where vc++ 2003 is not installed,
2.it will prompt saying xyz.dll missing.
3.find that dll in your system and place it in your new system, where your exe resides.
4.repeat the above steps till you will find your exe running.
|
|
|
|
|
chandu004 wrote: in visual studio 6.0 and here, three necessary dlls are required.
Have you ever heard of the term 'release build'?
Do you know why and how to make one?
Why don't you do it?
Though I speak with the tongues of men and of angels, and have not money, I am become as a sounding brass, or a tinkling cymbal.
George Orwell, "Keep the Aspidistra Flying", Opening words
|
|
|
|
|
chandu004 wrote: MFC42D.DLL
MFCO42D.DLL
MSVCRTD.DLL
* you are in Debug mode, so you are not doing the right thing.
* in this way you can forget some dlls. use a software to find dependencyes like Cedric said.
Russell
|
|
|
|
|
It is illegal to distribute MFC's debug DLLs.
"A good athlete is the result of a good and worthy opponent." - David Crow
"To have a respect for ourselves guides our morals; to have deference for others governs our manners." - Laurence Sterne
|
|
|
|
|
When you create your project, set the option "Use MFC in a static library" instead of "Use MFC in a shared dll".
|
|
|
|
|
Thank you for your comments.
Now at least i know where to start to.
Till next time. God Bless.
|
|
|
|
|
SUBJECT : URGENT
help me to solve multiply matrix with angle 30 degree and -30 degree at positive and negative sequence based on transformer connection
A = | yt -yt*angle -30degree |
| -yt*angle 30degree yt |
B = | yt -yt*angle 30 degree |
|-yt * angle -30degree yt |
SEQUENCE COMPONENTS
Transformer Connection Equivalent Sequence Circuit / Admittance Matrix
Positive Negative
Y – G ∆ A B
Y ∆ A B
∆ Y – G B A
∆ Y B A
1) ASSIGNMENT: IMPROVING FAULT ANALYSIS BY USING SEQUENCE COMPONENTS.
CONDITION THAT SHOULD TO REFER FOR GETTING ADMITTANCE OF POSITIVE AND NEGATIVE SEQUENCE [ Y-MATRIX ]
2) COMPILER : VISUAL C++
3) DUE DATE : friday(5 OCT 2007 )
TIME ZONE: (GMT+8.00) KUALA LUMPUR, SINGAPORE
4) STUDY FIELD : ELECTRICAL ENGINEERING MAJORING POWER
BOOK REFER : HADI SAADAT, “POWER SYSTEM ANALYSIS” 2ND EDITION, MC GRAW HILL.
PROGRAMMING
/* MOHD FUAD BIN HAJI ABDUL LATIP
ASSIGNMENT FOR POWER SYSTEM ANALYSIS - PENYELESAIAN SISTEM TIDAK SEIMBANG
KEE97062
*/
#include <stdio.h>
#include <malloc.h>
#include <stdlib.h>
#include <math.h>
//******************************************************************************************
void invmatrik(float **c,int m)
{
int i,j,k,l;
for(i=1;i<=m;i++)
{
c[i][i]=(float)(1.0/c[i][i]);
for(j=1;j<=m;j++)
{
if(j!=i)
{
c[j][i]=c[j][i]*c[i][i];
for(k=1;k<=m;k++)
{
if(k!=i)
{
c[j][k]=c[j][k]-c[j][i]*c[i][k];
if(j==m)
{
c[i][k]=-c[i][i]*c[i][k];
}
}
}
}
}
}
k=m-1;
for(l=1;l<=k;l++){
c[m][l]=-c[m][m]*c[m][l];
}
}
//*****************************************************************************************
void kalimatrik(float **a,float **b,float **c,int tb)
{
int i,j,k,m=1;
float *sem;
sem=(float *)calloc((tb+1)*(tb+1),sizeof(float));
for(i=1;i<=tb*tb;i++)
sem[i]=0;
for(i=1;i<=tb;i++)
{
for(j=1;j<=tb;j++)
{
for(k=1;k<=tb;k++)
{
sem[m] +=a[i][k]*b[k][j];
}
m++;
}
}
m=1;
for(i=1;i<=tb;i++)
for(j=1;j<=tb;j++)
{
c[i][j]=sem[m];
m++;
}
i=0;
free(sem);
}
//********************************************************************************************
void addmatrik(float **A,float **B,float **net,int line)
{
int i,j;
for(i=1;i<=line;i++)
{
for(j=1;j<=line;j++)
{
net[i][j]=A[i][j] + B[i][j];
}
}
}
//********************************************************************************************
float realpart(float R,float X)
{
float Greal;
Greal = R/(R*R + X*X);
return (Greal);
}
float imgpart(float R,float X)
{
float Bimg = -X/(R*R + X*X);
return (Bimg);
}
//--------------------------------------------------------------------------------------------
struct data
{
int send,recv,trans_ada,jen_trans;
float R,X,S,Gzero,Bzero,zf;
};
struct generator
{
int bus,bumi;
float Xgen;
};
struct addbus
{
int nobus;
float G_tambah,B_tambah;
};
struct positif
{
int hantar,terima;
float Rpos,Xpos,Spos,Gpos,Bpos;
};
struct genpos
{
int buspos,bumipos;
float Xgenpos;
};
//*****************************************************************************************
#define saiz 1
#define max_char 10
#define INF 10000000000
int main(void)
{
FILE *fin,*fout,*input;
int jum_data,jum_gen,tambahnilai,i,j,k,jum_bus,pos_data,pos_bus,gen_pos,n,g;
float *realdiag, *imgdiag, **realmatrik, **imgmatrik, **netkaliG, **netkaliB,
**invG, **invB, **netadd,zn,*gpospe, *bpospe, **gposmatrik, **bposmatrik,
**jumkalig, **jumkalib, **jumadd, **gposinv, **bposinv,*Ifg,*IfgN,*IfbN,*Ifb,*Ifg0,
*Ifg2,*Ifb0,*Ifb2,**voltangagalG0,**voltangagalB0,**voltangagalG1a,**voltangagalB1a,
**voltangagalG1b,**voltangagalB1b,*A,*B,*C,*D,*E,*F,**voltfasaG0,**voltfasaB0,**voltfasaG1,
**voltfasaB1,**voltfasaG2,**voltfasaB2;
char file_name[max_char + saiz],file_namepos[max_char + saiz],yes;
struct data *dot;
struct generator *gen;
struct addbus *tambahnilaibus;
//@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
printf("\n\n\n");
printf("\t\t\tWELCOME TO UNSYMMETRICAL FAULT PROGRAM\n\n\n");
printf("\t\t\tCopyright (c) Fuad Latip 2000\n\n\n");
printf("\t\t~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~\n\n\n\n");
//@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
fout = fopen("JAWAPAN.txt","w+");
SEMULA:
{
fputs ("\tPlease enter the name of zero sequence file in format .txt:",stdout);
gets (file_name);
printf("\n\n");
if ((fin=fopen(file_name,"r"))==NULL)
{
printf("\t\a\aSORRY. File %s cannot opened.\n\tPlease try again\n\n\n",file_name);
goto SEMULA;
}
}
SEMULA2:
{
fputs ("\tPlease enter the name of positive sequence file in format .txt:",stdout);
gets (file_namepos);
printf("\n\n");
if ((input=fopen(file_namepos,"r"))==NULL)
{
printf("\n\t\a\aSORRY. File %s cannot opened.\n\tPlease try again\n\n\n",file_namepos);
goto SEMULA2;
}
}
//--------------------------------------------------------------------------------------
fscanf(fin,"%d",&jum_data);
fscanf(fin,"%d",&jum_bus);
dot = (struct data *)calloc(jum_data+1,sizeof(struct data));
for(j=1;j<=jum_data;j++)
{
dot[j].send=0;
dot[j].recv=0;
dot[j].trans_ada=0;
dot[j].jen_trans=0;
dot[j].R=0;
dot[j].X=0;
dot[j].S=0;
}
for(j=1;j<=jum_data;j++)
{
fscanf(fin,"%d %d %d %d %f %f %f",&dot[j].send,&dot[j].recv,&dot[j].trans_ada,&dot[j].jen_trans,&dot[j].R,&dot[j].X,&dot[j].S);
}
for(j=1;j<=jum_data;j++)
{
if(!dot[j].trans_ada==1 || (dot[j].trans_ada ==1 && dot[j].jen_trans ==1))
{
dot[j].Gzero = realpart(dot[j].R,dot[j].X);
dot[j].Bzero = imgpart(dot[j].R,dot[j].X);
}
else
{
dot[j].Gzero = 0;
dot[j].Bzero = 0;
}
}
//--------------------------------------------------------------------------------------
jum_gen =0;
fscanf(fin,"%d",&jum_gen);
gen = (struct generator *) calloc(jum_gen+1,sizeof(struct generator));
for(j=1;j<=jum_gen;j++)
{
fscanf(fin,"%d %d %f",&gen[j].bus,&gen[j].bumi,&gen[j].Xgen);
}
zn=0;
fscanf(fin,"%f",&zn);
fscanf(fin,"%f",&dot[j].zf);
tambahnilai = 0;
for(j=1;j<=jum_data;j++)
{
if(dot[j].trans_ada)
if(dot[j].jen_trans == 3 || dot[j].jen_trans == 4)
tambahnilai ++;
}
tambahnilaibus = (struct addbus *)calloc(tambahnilai+1,sizeof(struct addbus));
//--------------------------------------------------------------------------------------
realdiag = (float *)calloc(jum_bus+1,sizeof(float));
imgdiag = (float *)calloc(jum_bus+1,sizeof(float));
//--------------------------------------------------------------------------------------
i=1;
for(j=1;j<=jum_data;j++)
{
if(dot[j].trans_ada==1)
{
if(dot[j].jen_trans==2)
{
dot[j].Gzero = 0;
dot[j].Bzero = 0;
}
else
if(dot[j].jen_trans==3)//star grounded - delta
{
dot[j].Gzero = 0;
dot[j].Bzero = 0;
tambahnilaibus[i].nobus = dot[j].send;
tambahnilaibus[i].G_tambah = realpart(dot[j].R,dot[j].X);
tambahnilaibus[i].B_tambah = imgpart(dot[j].R,dot[j].X);
i++;
}
else
if(dot[j].jen_trans==4)//delta - star grounded
{
dot[j].Gzero = 0;
dot[j].Bzero = 0;
tambahnilaibus[i].nobus = dot[j].recv;
tambahnilaibus[i].G_tambah = realpart(dot[j].R,dot[j].X);
tambahnilaibus[i].B_tambah = imgpart(dot[j].R,dot[j].X);
i++;
}
}
}
//---------------------------------------------------------------------------------------------
realmatrik=(float **)calloc(jum_bus+1,sizeof(float *));
imgmatrik=(float **)calloc(jum_bus+1,sizeof(float *));
for(i=1;i<=jum_bus;i++)
{
realmatrik[i]=(float *)calloc(jum_bus+1,sizeof(float));
imgmatrik[i]=(float *)calloc(jum_bus+1,sizeof(float));
}
for(j=1;j<=jum_bus;j++)
{
realdiag[j]=0;
imgdiag[j]=0;
}
for(j=1;j<=jum_data;j++)
{
if(!dot[j].trans_ada==1 || (dot[j].trans_ada ==1 && dot[j].jen_trans ==1))
{
realdiag[dot[j].send]=realdiag[dot[j].send] + realpart(dot[j].R,dot[j].X);
imgdiag[dot[j].send]=imgdiag[dot[j].send] + imgpart(dot[j].R,dot[j].X) + dot[j].S/2;
realdiag[dot[j].recv]=realdiag[dot[j].recv] + realpart(dot[j].R,dot[j].X);
imgdiag[dot[j].recv]=imgdiag[dot[j].recv] + imgpart(dot[j].R,dot[j].X) + dot[j].S/2;
}
}
for(j=1;j<=tambahnilai;j++)
{
realdiag[tambahnilaibus[j].nobus] +=tambahnilaibus[j].G_tambah;
imgdiag[tambahnilaibus[j].nobus] +=tambahnilaibus[j].B_tambah;
}
for(j=1;j<=jum_gen;j++)
{
if(gen[j].bumi==1)
imgdiag[gen[j].bus] += imgpart(0,(gen[j].Xgen + 3*zn));
}
//------------------------------------------------------------------------------------------
for(j=1;j<=jum_bus;j++)
{
for(i=1;i<=jum_bus;i++)
{
realmatrik[j][i]=0;
imgmatrik[j][i]=0;
}
}
for(i=1;i<=jum_bus;i++)
{
realmatrik[i][i]=realdiag[i];
imgmatrik[i][i]=imgdiag[i];
}
for(k=1;k<=jum_data;k++)
{
realmatrik[dot[k].send][dot[k].recv]= -dot[k].Gzero;
imgmatrik[dot[k].send][dot[k].recv]= -dot[k].Bzero;
realmatrik[dot[k].recv][dot[k].send]= -dot[k].Gzero;
imgmatrik[dot[k].recv][dot[k].send]= -dot[k].Bzero;
}
//---------------------------------------------------------------------------------------
netkaliG=(float **)calloc(jum_bus+1,sizeof(float *));
netkaliB=(float **)calloc(jum_bus+1,sizeof(float *));
invG=(float **)calloc(jum_bus+1,sizeof(float *));
invB=(float **)calloc(jum_bus+1,sizeof(float *));
netadd=(float **)calloc(jum_bus+1,sizeof(float *));
for(i=1;i<=jum_bus;i++)
{
netkaliG[i]=(float *)calloc(jum_bus+1,sizeof(float));
netkaliB[i]=(float *)calloc(jum_bus+1,sizeof(float));
invG[i]=(float *)calloc(jum_bus+1,sizeof(float));
invB[i]=(float *)calloc(jum_bus+1,sizeof(float));
netadd[i]=(float *)calloc(jum_bus+1,sizeof(float));
}
//---------------------------------------------------------------------------------------
for(i=1;i<=jum_bus;i++)
{
for(j=1;j<=jum_bus;j++)
{
netkaliG[i][j]=0;
netkaliB[i][j]=0;
invG[i][j]=0;
invB[i][j]=0;
netadd[i][j]=0;
}
}
kalimatrik(realmatrik,realmatrik,netkaliG,jum_bus);
kalimatrik(imgmatrik,imgmatrik,netkaliB,jum_bus);
addmatrik(netkaliG,netkaliB,netadd,jum_bus);
invmatrik(netadd,jum_bus);
kalimatrik(realmatrik,netadd,invG,jum_bus);
kalimatrik(imgmatrik,netadd,invB,jum_bus);
for(i=1;i<=jum_bus;i++)
{
for(j=1;j<=jum_bus;j++)
{
invG[i][j] = -(invG[i][j]);
invB[i][j] = -(invB[i][j]);
}
}
//----------------------------------------------------------------------------------------
fprintf(fout,"MATRIX Y FOR ZERO SEQUENCE\n");
for(i=1;i<=jum_bus;i++)
{
for(j=1;j<=jum_bus;j++)
{
fprintf(fout,"%.4f %.4fj\t\t",realmatrik[i][j],imgmatrik[i][j]);
}
fprintf(fout,"\n");
}
fprintf(fout,"\n\n");
fprintf(fout,"INVERSE MATRIX Z FOR ZERO SEQUENCE\n");
for(i=1;i<=jum_bus;i++)
{
for(j=1;j<=jum_bus;j++)
{
fprintf(fout,"%.4f + %.4fj\t",invG[i][j],invB[i][j]);
}
fprintf(fout,"\n");
}
//##################################################################################
// JUJUK POSITIF
//##################################################################################
//----------------------------------------------------------------------------------
struct positif *pos;
struct genpos *gpos;
pos_data=0;
pos_bus=0;
fscanf(input,"%d",&pos_data);
fscanf(input,"%d",&pos_bus);
pos = (struct positif *)calloc(pos_data+1,sizeof(struct positif));
for(j=1;j<=pos_data;j++)
{
pos[j].hantar=0;
pos[j].terima=0;
pos[j].Rpos=0;
pos[j].Xpos=0;
pos[j].Spos=0;
}
for(i=1;i<=pos_data;i++)
{
fscanf(input,"%d %d %f %f %f", &pos[i].hantar,&pos[i].terima,&pos[i].Rpos,&pos[i].Xpos,&pos[i].Spos);
}
//----------------------------------------------------------------------------------------
for(k=1;k<=pos_data;k++)
{
pos[k].Gpos = realpart(pos[k].Rpos,pos[k].Xpos);
pos[k].Bpos = imgpart(pos[k].Rpos,pos[k].Xpos);
}
//----------------------------------------------------------------------------------------
// membina location
gpospe = (float *)calloc(pos_bus+1,sizeof(float));
bpospe = (float *)calloc(pos_bus+1,sizeof(float));
gposmatrik=(float **)calloc(pos_bus+1,sizeof(float *));
bposmatrik=(float **)calloc(pos_bus+1,sizeof(float *));
for(i=0;i<=pos_bus;i++)
{
gposmatrik[i]=(float *)calloc(pos_bus+1,sizeof(float));
bposmatrik[i]=(float *)calloc(pos_bus+1,sizeof(float));
}
//----------------------------------------------------------------------------------------
for(j=1;j<=pos_bus;j++)
{
gpospe[j]=0;
bpospe[j]=0;
}
for(j=1;j<=pos_data;j++)
{
gpospe[pos[j].hantar]=gpospe[pos[j].hantar] + realpart(pos[j].Rpos,pos[j].Xpos);
bpospe[pos[j].hantar]=bpospe[pos[j].hantar] + imgpart(pos[j].Rpos,pos[j].Xpos) + pos[j].Spos/2;
gpospe[pos[j].terima]=gpospe[pos[j].terima] + realpart(pos[j].Rpos,pos[j].Xpos);
bpospe[pos[j].terima]=bpospe[pos[j].terima] + imgpart(pos[j].Rpos,pos[j].Xpos) + pos[j].Spos/2;
}
//---------------------------------------------------------------------------------------
//penambahan nilai jika ada generator
gen_pos =0;
fscanf(input,"%d",&gen_pos);
gpos = (struct genpos *) calloc(gen_pos+1,sizeof(struct genpos));
for(j=1;j<=gen_pos;j++)
{
fscanf(input,"%d %d %f",&gpos[j].buspos,&gpos[j].bumipos,&gpos[j].Xgenpos);
}
for(i=1;i<=gen_pos;i++)
{
if(gpos[i].bumipos)
bpospe[gpos[i].buspos] += imgpart(0,(gpos[i].Xgenpos));
}
//------------------------------------------------------------------------------------
for(j=1;j<=pos_bus;j++)
{
for(i=1;i<=pos_bus;i++)
{
gposmatrik[j][i]=0;
bposmatrik[j][i]=0;
}
}
for(i=1;i<=pos_bus;i++)
{
gposmatrik[i][i]=gpospe[i];
bposmatrik[i][i]=bpospe[i];
}
for(k=1;k<=pos_data;k++)
{
gposmatrik[pos[k].hantar][pos[k].terima]= -pos[k].Gpos;
bposmatrik[pos[k].hantar][pos[k].terima]= -pos[k].Bpos;
gposmatrik[pos[k].terima][pos[k].hantar]= -pos[k].Gpos;
bposmatrik[pos[k].terima][pos[k].hantar]= -pos[k].Bpos;
}
//-------------------------------------------------------------------------------------
// inverse matrik
jumkalig=(float **)calloc(pos_bus+1,sizeof(float *));
jumkalib=(float **)calloc(pos_bus+1,sizeof(float *));
jumadd=(float **)calloc(pos_bus+1,sizeof(float *));
gposinv=(float **)calloc(pos_bus+1,sizeof(float *));
bposinv=(float **)calloc(pos_bus+1,sizeof(float *));
for(i=1;i<=pos_bus;i++)
{
jumkalig[i]=(float *)calloc(pos_bus+1,sizeof(float));
jumkalib[i]=(float *)calloc(pos_bus+1,sizeof(float));
jumadd[i]=(float *)calloc(pos_bus+1,sizeof(float));
gposinv[i]=(float *)calloc(pos_bus+1,sizeof(float));
bposinv[i]=(float *)calloc(pos_bus+1,sizeof(float));
}
for(j=1;j<=pos_bus;j++)
{
for(i=1;i<=pos_bus;i++)
{
jumkalig[j][i]=0;
jumkalib[j][i]=0;
jumadd[j][i]=0;
gposinv[j][i]=0;
bposinv[j][i]=0;
}
}
kalimatrik(gposmatrik,gposmatrik,jumkalig,pos_bus);
kalimatrik(bposmatrik,bposmatrik,jumkalib,pos_bus);
addmatrik(jumkalig,jumkalib,jumadd,pos_bus);
invmatrik(jumadd,pos_bus);
kalimatrik(gposmatrik,jumadd,gposinv,pos_bus);
kalimatrik(bposmatrik,jumadd,bposinv,pos_bus);
for(i=1;i<=pos_bus;i++)
{
for(j=1;j<=pos_bus;j++)
{
gposinv[i][j] = -(gposinv[i][j]);
bposinv[i][j] = -(bposinv[i][j]);
}
}
//--------------------------------------------------------------------------------------
fprintf(fout,"\n\n\n");
fprintf(fout,"MATRIX Y FOR POSITIVE/NEGATIVE SEQUENCE\n");
for(i=1;i<=pos_bus;i++)
{
for(j=1;j<=pos_bus;j++)
{
fprintf(fout,"%.4f %.4fj\t\t",gposmatrik[i][j],bposmatrik[i][j]);
}
fprintf(fout,"\n");
}
fprintf(fout,"\n\n");
fprintf(fout,"INVERSE MATRIX Z FOR POSITIVE/NEGATIVE SEQUENCE\n");
for(i=1;i<=pos_bus;i++)
{
for(j=1;j<=pos_bus;j++)
{
fprintf(fout,"%.4f + %.4fj\t",gposinv[i][j],bposinv[i][j]);
}
fprintf(fout,"\n");
}
//$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
ULANG:
{
printf("\tPLEASE CHOOSE THE FAULT:\n");
printf("\t~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~\n");
printf("\t1. A PHASE TO GROUND FAULT\n\n");
printf("\t2. TWO PHASE TO GROUND FAULT\n\n");
printf("\t3. PHASE TO PHASE FAULT\n\n");
printf("\t4. 3-PHASE FAULT\n\n\n\n");
printf("\tYOUR CHOICE IS:");
scanf("%d",&n);
printf("\n");
if ((n==1 || n==2 || n==3 || n==4)==NULL)
{
printf("\n\n\n\n\n\n\n\n\n\n\n");
printf("\t\a\aYOU ARE ENTER INVALID NUMBER\n\tPLEASE CHOOSE BETWEEN 1-4 ONLY\n\n");
goto ULANG;
}
printf("\tMY CHOICE :%d\t",n);
printf("\n\n\n");
printf("\tFAULT OCCURED AT BUS NUMBER (BETWEEN BUS 1 UNTIL %d):",jum_bus);
scanf("%d",&g);
printf("\n");
printf("\tFAULT OCCURED AT BUS:%d\t",g);
printf("\n\n\n");
printf("\tALL INFORMATION ARE CORRECT?\n\tIF YES PLEASE TYPE 0 AND 1 IF NO:\t");
scanf("%d",&yes);
printf("\n\n");
}
if (yes==1) goto ULANG;
else if (yes==0)
{
printf("\n\t\t~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~\n\n");
printf("\t\t\a\a\aTHANK YOU FOR CHOOSING MY PROGRAM\n");
printf("\n\t\t YOU ANSWER AUTOMATICALLY SAVE IN FILE jawapan.txt\n");
printf("\n\n");
}
//------------------------------------------------------------------------------------------------------
//location untuk arus gagal dan voltan fasa
Ifg = (float *)calloc(jum_bus,sizeof(float));
IfgN = (float *)calloc(jum_bus,sizeof(float));
Ifb = (float *)calloc(jum_bus,sizeof(float));
IfbN = (float *)calloc(jum_bus,sizeof(float));
for(j=1;j<=jum_bus;j++)
{
Ifg[j]=0;
Ifb[j]=0;
IfgN[j]=0;
IfbN[j]=0;
}
voltangagalG0=(float **)calloc(jum_bus+1,sizeof(float *));
voltangagalG1a=(float **)calloc(jum_bus+1,sizeof(float *));
voltangagalG1b=(float **)calloc(jum_bus,sizeof(float *));
voltangagalB0=(float **)calloc(jum_bus,sizeof(float *));
voltangagalB1a=(float **)calloc(jum_bus,sizeof(float *));
voltangagalB1b=(float **)calloc(jum_bus,sizeof(float *));
for(i=1;i<=jum_bus;i++)
{
voltangagalG0[i]=(float *)calloc(jum_bus,sizeof(float));
voltangagalG1a[i]=(float *)calloc(jum_bus,sizeof(float));
voltangagalG1b[i]=(float *)calloc(jum_bus,sizeof(float));
voltangagalB0[i]=(float *)calloc(jum_bus,sizeof(float));
voltangagalB1a[i]=(float *)calloc(jum_bus,sizeof(float));
voltangagalB1b[i]=(float *)calloc(jum_bus,sizeof(float));
}
A = (float *)calloc(jum_bus,sizeof(float));
B = (float *)calloc(jum_bus,sizeof(float));
C = (float *)calloc(jum_bus,sizeof(float));
D = (float *)calloc(jum_bus,sizeof(float));
E = (float *)calloc(jum_bus,sizeof(float));
F = (float *)calloc(jum_bus,sizeof(float));
for(j=1;j<=jum_bus;j++)
{
A[j]=0;
B[j]=0;
C[j]=0;
D[j]=0;
E[j]=0;
F[j]=0;
}
Ifg2 = (float *)calloc(jum_bus,sizeof(float));
Ifg0 = (float *)calloc(jum_bus,sizeof(float));
Ifb2 = (float *)calloc(jum_bus,sizeof(float));
Ifb0 = (float *)calloc(jum_bus,sizeof(float));
voltfasaG0=(float **)calloc(jum_bus,sizeof(float *));
voltfasaG1=(float **)calloc(jum_bus,sizeof(float *));
voltfasaG2=(float **)calloc(jum_bus,sizeof(float *));
voltfasaB0=(float **)calloc(jum_bus,sizeof(float *));
voltfasaB1=(float **)calloc(jum_bus,sizeof(float *));
voltfasaB2=(float **)calloc(jum_bus,sizeof(float *));
for(i=1;i<=jum_bus;i++)
{
//voltan jujuk zero
voltfasaG0[i]=(float *)calloc(jum_bus,sizeof(float));
voltfasaG1[i]=(float *)calloc(jum_bus,sizeof(float));
//voltan jujuk positif
voltfasaG2[i]=(float *)calloc(jum_bus,sizeof(float));
voltfasaB0[i]=(float *)calloc(jum_bus,sizeof(float));
//voltan jujuk negatif
voltfasaB1[i]=(float *)calloc(jum_bus,sizeof(float));
voltfasaB2[i]=(float *)calloc(jum_bus,sizeof(float));
}
//$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
//jika kes satu fasa ke bumi
if(n==1)
{
Ifg[g] = (invG[g][g] + gposinv[g][g]*2)/(((invG[g][g] + gposinv[g][g]*2)*(invG[g][g] + gposinv[g][g]*2))+
((invB[g][g]+bposinv[g][g]*2+dot[1].zf)*(invB[g][g]+bposinv[g][g]*2+dot[1].zf)));
Ifb[g] = -(invB[g][g]+bposinv[g][g]*2+dot[1].zf)/(((invG[g][g] + gposinv[g][g]*2)*(invG[g][g] + gposinv[g][g]*2))+
((invB[g][g]+bposinv[g][g]*2+dot[1].zf)*(invB[g][g]+bposinv[g][g]*2+dot[1].zf)));
IfgN[g] = Ifg[g]*(-3);
IfbN[g] = Ifb[g]*(-3);
fprintf(fout,"\n\n\n\n");
fprintf(fout,"A PHASE TO GROUND FAULT\n\n\n");
fprintf(fout,"\tCURRENTS AT FAULT BUS Ifa(0)=Ifa(1)=Ifa(2). CURRENT Ifb=Ifc=0\n");
fprintf(fout,"\n");
fprintf(fout,"\tIfa(real)=%.4f\tIfa(imaginary)=%.4f\n",Ifg[g],Ifb[g]);
fprintf(fout,"\n\n\n");
fprintf(fout,"\tTOTAL FAULT CURRENT 3Ifzero\n\n");
fprintf(fout,"\tIftotal(real)=%.4f\tIftotal(imaginary)=%.4f",IfgN[g],IfbN[g]);
//---------------------------------------------------------------------------------------
for(j=1;j<=jum_bus;j++)
{
//voltan fasa A
voltangagalG0[j][g] = ((-invG[j][g]*Ifg[g])+(invB[j][g]*Ifb[g])) + (1-((gposinv[j][g]*Ifg[g])-(bposinv[j][g]*Ifb[g]))) + ((-gposinv[j][g]*Ifg[g])+(bposinv[j][g]*Ifb[g]));
if(!Ifg[g]==0)
{
voltangagalB0[j][g] = ((-invG[j][g]*Ifb[g])-(invB[j][g]*Ifg[g])) + (1-((-gposinv[j][g]*Ifb[g])-(bposinv[j][g]*Ifg[g]))) + ((-gposinv[j][g]*Ifb[g])-(bposinv[j][g]*Ifg[g]));
}
else
if (Ifg[g]==0 || !Ifg[g]==0)
{
//voltan fasa B
voltangagalG1a[j][g] = ((-invG[j][g]*Ifg[g])+(invB[j][g]*Ifb[g])) + (1-((gposinv[j][g]*Ifg[g])-(bposinv[j][g]*Ifb[g])))*(-0.5) + ((-gposinv[j][g]*Ifg[g])+(bposinv[j][g]*Ifb[g]))*(-0.5);
voltangagalB1a[j][g] = ((-invG[j][g]*Ifb[g])-(invB[j][g]*Ifg[g])) + (1-((-gposinv[j][g]*Ifb[g])-(bposinv[j][g]*Ifg[g])))*(-0.8660) + ((-gposinv[j][g]*Ifb[g])-(bposinv[j][g]*Ifg[g]))*(0.8660);
//voltan fasa C
voltangagalG1b[j][g] = ((-invG[j][g]*Ifg[g])+(invB[j][g]*Ifb[g])) + (1-((gposinv[j][g]*Ifg[g])-(bposinv[j][g]*Ifb[g])))*(-0.5) + ((-gposinv[j][g]*Ifg[g])+(bposinv[j][g]*Ifb[g]))*(-0.5);
voltangagalB1b[j][g] = ((-invG[j][g]*Ifb[g])-(invB[j][g]*Ifg[g])) + (1-((-gposinv[j][g]*Ifb[g])-(bposinv[j][g]*Ifg[g])))*(0.8660) + ((-gposinv[j][g]*Ifb[g])-(bposinv[j][g]*Ifg[g]))*(-0.8660);
}
}
//------------------------------------------------------------
fprintf(fout,"\n\n\n");
fprintf(fout,"\t\t\t\t\t\tVOLTAGES ALL BUSES TO BUS %d \n\n",g);
for(j=1;j<=jum_bus;j++)
{
fprintf(fout,"V%d%dphaseA:%.4f+%.4fj\t",j,g,voltangagalG0[j][g],voltangagalB0[j][g]);
}
fprintf(fout,"\n");
fprintf(fout,"\n");
for(j=1;j<=jum_bus;j++)
{
fprintf(fout,"V%d%dphaseB:%.4f%.4fj\t",j,g,voltangagalG1a[j][g],voltangagalB1a[j][g]);
}
fprintf(fout,"\n");
fprintf(fout,"\n");
for(j=1;j<=jum_bus;j++)
{
fprintf(fout,"V%d%dphaseC:%.4f+%.4fj\t",j,g,voltangagalG1b[j][g],voltangagalB1b[j][g]);
}
fprintf(fout,"\n");
}
else
//---------------------------------------------------------------------------------
//jika kes dua fasa ke bumi
if(n==2)
{
//arus jujuk positif
A[g]=((gposinv[g][g]*(gposinv[g][g] + invG[g][g])) - ((bposinv[g][g]*(bposinv[g][g] + invB[g][g]))) + (invG[g][g]*gposinv[g][g]) - (invB[g][g]*bposinv[g][g]));
B[g]=((gposinv[g][g]*(bposinv[g][g] + invB[g][g])) + ((bposinv[g][g]*(gposinv[g][g] + invG[g][g]))) + (invG[g][g]*bposinv[g][g]) + (invB[g][g]*gposinv[g][g]));
Ifg[g] = (((A[g]*(invG[g][g] + gposinv[g][g])) + ((bposinv[g][g] + invB[g][g])*B[g]))/((A[g]*A[g]) + (B[g]*B[g])));
Ifb[g] = (((A[g]*(bposinv[g][g] + invB[g][g])) - ((invG[g][g] + gposinv[g][g])*B[g]))/((A[g]*A[g]) + (B[g]*B[g])));
fprintf(fout,"\n\n\n\n");
fprintf(fout,"\tTWO PHASE TO GROUND FAULT\n\n");
fprintf(fout,"\tPOITIVE SEQUENCE CURRENT=\treal=%.4f\timaginary=%.4fj\n",Ifg[g],Ifb[g]);
//arus jujuk negatif
C[g]=(((invG[g][g]*(gposinv[g][g]+invG[g][g]))-(invB[g][g]*(bposinv[g][g]+invB[g][g])))/(((gposinv[g][g]+invG[g][g])*(gposinv[g][g]+invG[g][g]))+((bposinv[g][g]+invB[g][g])*(bposinv[g][g]+invB[g][g]))));
D[g]=(((invG[g][g]*(bposinv[g][g]+invB[g][g]))+(invB[g][g]*(gposinv[g][g]+invG[g][g])))/(((gposinv[g][g]+invG[g][g])*(gposinv[g][g]+invG[g][g]))+((bposinv[g][g]+invB[g][g])*(bposinv[g][g]+invB[g][g]))));
Ifg2[g] = ((C[g]*(-Ifg[g])) + (Ifb[g]*D[g]));
Ifb2[g] = ((C[g]*Ifb[g]) + ((-Ifg[g])*D[g]));
fprintf(fout,"\tNEGATIVE SEQUENCE CURRENT=\treal=%.4f\timaginary=%.4fj\n",Ifg2[g],Ifb2[g]);
//arus jujuk zero
E[g]=(((gposinv[g][g]*(gposinv[g][g]+invG[g][g]))-(bposinv[g][g]*(bposinv[g][g]+invB[g][g])))/(((gposinv[g][g]+invG[g][g])*(gposinv[g][g]+invG[g][g]))+((bposinv[g][g]+invB[g][g])*(bposinv[g][g]+invB[g][g]))));
F[g]=(((gposinv[g][g]*(bposinv[g][g]+invB[g][g]))+(bposinv[g][g]*(gposinv[g][g]+invG[g][g])))/(((gposinv[g][g]+invG[g][g])*(gposinv[g][g]+invG[g][g]))+((bposinv[g][g]+invB[g][g])*(bposinv[g][g]+invB[g][g]))));
Ifg0[g] = ((E[g]*(-Ifg[g])) + (Ifb[g]*F[g]));
Ifb0[g] = ((E[g]*Ifb[g]) + ((-Ifg[g])*F[g]));
fprintf(fout,"\tZERO SEQUENCE CURRENT=\treal=%.4f\timaginary=%.4fj\n",Ifg0[g],Ifb0[g]);
fprintf(fout,"\n\n");
IfgN[g]=Ifg0[g]*3;
IfbN[g]=Ifb0[g]*3;
fprintf(fout,"\n\n\n");
fprintf(fout,"\tTOTAL FAULT CURRENT 3Ifzero\n\n");
fprintf(fout,"\tIftotal(real)=%.4f\tIftotal(imaginary)=%.4f",IfgN[g],IfbN[g]);
fprintf(fout,"\n\n\n");
for(j=1;j<=jum_bus;j++)
{
//voltan fasa A
voltfasaG0[j][g] = ((-invG[j][g]*Ifg0[g])+(invB[j][g]*Ifb0[g]));
voltfasaB0[j][g] = ((-invG[j][g]*Ifb0[g])-(invB[j][g]*Ifg0[g]));
voltfasaG1[j][g] = (1-((gposinv[j][g]*Ifg[g])-(bposinv[j][g]*Ifb[g])));
voltfasaB1[j][g] = (1-((gposinv[j][g]*Ifg[g])-(bposinv[j][g]*Ifb[g])));
voltfasaG2[j][g] = ((-gposinv[j][g]*Ifg2[g])+(bposinv[j][g]*Ifb2[g]));
voltfasaB2[j][g] = ((-gposinv[j][g]*Ifg2[g])+(bposinv[j][g]*Ifb2[g]));
}
for(j=1;j<=jum_bus;j++)
{
voltangagalG0[j][g] = voltfasaG0[j][g] + voltfasaG1[j][g] + voltfasaG2[j][g];
voltangagalB0[j][g] = voltfasaB0[j][g] + voltfasaB1[j][g] + voltfasaB2[j][g];
voltangagalG1a[j][g] = voltfasaG0[j][g] + voltfasaG1[j][g]*(-0.5) + voltfasaG2[j][g]*(-0.5);
voltangagalB1a[j][g] = voltfasaB0[j][g] + voltfasaB1[j][g]*(-0.8660) + voltfasaB2[j][g]*(0.8660);
voltangagalG1b[j][g] = voltfasaG0[j][g] + voltfasaG1[j][g]*(-0.5) + voltfasaG2[j][g]*(-0.5);
voltangagalB1b[j][g] = voltfasaB0[j][g] + voltfasaB1[j][g]*(0.8660) + voltfasaB2[j][g]*(-0.8660);
}
fprintf(fout,"\n\n\n");
fprintf(fout,"\t\t\t\t\t\tVOLTAGES ALL BUSES TO BUS %d \n\n",g);
for(j=1;j<=jum_bus;j++)
{
fprintf(fout,"V%d%dphaseA:%.4f+%.4fj\t",j,g,voltangagalG0[j][g],voltangagalB0[j][g]);
}
fprintf(fout,"\n");
fprintf(fout,"\n");
for(j=1;j<=jum_bus;j++)
{
fprintf(fout,"V%d%dphaseB:%.4f%.4fj\t",j,g,voltangagalG1a[j][g],voltangagalB1a[j][g]);
}
fprintf(fout,"\n");
fprintf(fout,"\n");
for(j=1;j<=jum_bus;j++)
{
fprintf(fout,"V%d%dphaseC:%.4f+%.4fj\t",j,g,voltangagalG1b[j][g],voltangagalB1b[j][g]);
}
fprintf(fout,"\n");
}
else
//kes satu fasa ke fasa
if(n==3)
{
//arus fasa zero =0
A[g] = (gposinv[g][g] + gposinv[g][g])*(gposinv[g][g] + gposinv[g][g]);
B[g] = (bposinv[g][g] + bposinv[g][g])*(bposinv[g][g] + bposinv[g][g]);
Ifg0[g]=0;
Ifb0[g]=0;
Ifg[g] = (gposinv[g][g] + gposinv[g][g])/(A[g] + B[g]);
Ifb[g] = -(bposinv[g][g] + bposinv[g][g])/(A[g] + B[g]);
Ifg2[g] = Ifg[g]*(-1);
Ifb2[g] = Ifb[g]*(-1);
IfgN[g] = Ifg0[g]*3;
IfbN[g] = Ifb0[g]*3;
fprintf(fout,"\n\n\n\n");
fprintf(fout,"PHASE TO PHASE FAULT\n\n\n");
fprintf(fout,"\tCURRENT AT FAULT BUS Ifa(0)= 0, Ifa(1)=-Ifa(2)\n");
fprintf(fout,"\n");
fprintf(fout,"\tIfa(real)=%.4f\tIfa(imaginary)=%.4f\n",Ifg[g],Ifb[g]);
fprintf(fout,"\n\n\n");
fprintf(fout,"\tTOTAL FAULT CURRENT 3Ifzero\n\n");
fprintf(fout,"\tIftotal(real)=%.4f\tIftotal(imaginary)=%.4f",IfgN[g],IfbN[g]);
for(j=1;j<=jum_bus;j++)
{
//voltan fasa A
voltfasaG0[j][g] = ((-invG[j][g]*Ifg0[g])+(invB[j][g]*Ifb0[g]));
voltfasaB0[j][g] = ((-invG[j][g]*Ifb0[g])-(invB[j][g]*Ifg0[g]));
voltfasaG1[j][g] = (1-((gposinv[j][g]*Ifg[g])-(bposinv[j][g]*Ifb[g])));
voltfasaB1[j][g] = (1-((gposinv[j][g]*Ifg[g])-(bposinv[j][g]*Ifb[g])));
voltfasaG2[j][g] = ((-gposinv[j][g]*Ifg2[g])+(bposinv[j][g]*Ifb2[g]));
voltfasaB2[j][g] = ((-gposinv[j][g]*Ifg2[g])+(bposinv[j][g]*Ifb2[g]));
}
for(j=1;j<=jum_bus;j++)
{
voltangagalG0[j][g] = voltfasaG0[j][g] + voltfasaG1[j][g] + voltfasaG2[j][g];
voltangagalB0[j][g] = voltfasaB0[j][g] + voltfasaB1[j][g] + voltfasaB2[j][g];
voltangagalG1a[j][g] = voltfasaG0[j][g] + voltfasaG1[j][g]*(-0.5) + voltfasaG2[j][g]*(-0.5);
voltangagalB1a[j][g] = voltfasaB0[j][g] + voltfasaB1[j][g]*(-0.8660) + voltfasaB2[j][g]*(0.8660);
voltangagalG1b[j][g] = voltfasaG0[j][g] + voltfasaG1[j][g]*(-0.5) + voltfasaG2[j][g]*(-0.5);
voltangagalB1b[j][g] = voltfasaB0[j][g] + voltfasaB1[j][g]*(0.8660) + voltfasaB2[j][g]*(-0.8660);
}
fprintf(fout,"\n\n\n");
fprintf(fout,"\t\t\t\t\t\tVOLTAGES ALL BUSES TO BUS %d \n\n",g);
for(j=1;j<=jum_bus;j++)
{
fprintf(fout,"V%d%dphaseA:%.4f+%.4fj\t",j,g,voltangagalG0[j][g],voltangagalB0[j][g]);
}
fprintf(fout,"\n");
fprintf(fout,"\n");
for(j=1;j<=jum_bus;j++)
{
fprintf(fout,"V%d%dphaseB:%.4f%.4fj\t",j,g,voltangagalG1a[j][g],voltangagalB1a[j][g]);
}
fprintf(fout,"\n");
fprintf(fout,"\n");
for(j=1;j<=jum_bus;j++)
{
fprintf(fout,"V%d%dphaseC:%.4f+%.4fj\t",j,g,voltangagalG1b[j][g],voltangagalB1b[j][g]);
}
fprintf(fout,"\n");
}
else
//kes 3 fasa ke bumi @ BALANCED FAULT
if(n==4)
{
float *Voltanreal,*Voltanimag, *Voltanmagnitud, *Voltanangle;
Voltanreal = (float *)calloc(jum_bus+1,sizeof(float));
Voltanimag = (float *)calloc(jum_bus+1,sizeof(float));
Voltanmagnitud = (float *)calloc(jum_bus+1,sizeof(float));
Voltanangle = (float *)calloc(jum_bus+1,sizeof(float));
for(i=1;i<=jum_bus;i++)
{
Voltanreal[i] = 1 - ((gposinv[i][g]*gposinv[g][g]+ bposinv[i][g]*bposinv[g][g])/(gposinv[g][g]*gposinv[g][g]+ bposinv[g][g]*bposinv[g][g]));
Voltanimag[i] = 1 - ((bposinv[i][g]*gposinv[g][g]- gposinv[i][g]*bposinv[g][g])/(gposinv[g][g]*gposinv[g][g]+ bposinv[g][g]*bposinv[g][g]));
Voltanmagnitud[i] = sqrt(Voltanreal[i]*Voltanreal[i] + Voltanimag[i]*Voltanimag[i]);
//Voltanangle[i]= (atan(Voltanimag[i]/ Voltanreal[i])*180)/3.142;
}
fprintf(fout,"\n\n\n");
fprintf(fout,"\t\t\t\t\t\tVOLTAGES ALL BUSES \n\n");
for(i=1;i<=jum_bus;i++)
{
fprintf(fout,"voltan[%d]= %.4f Angle[%d]=%.4f\n",i,Voltanmagnitud[i],i,Voltanmagnitud[i]);
}
}
return 0;
}
ZERO-SEQUENCE INPUT
( file_name : zero.txt ) POSITIVE/NEGATIVE SEQUENCE INPUT
( file_namepos : pos1.txt )
14
11
1 2 1 4 0 0.06 0
2 3 0 0 0 0.60 0
2 5 0 0 0 0.30 0
2 6 0 0 0 0.90 0
3 4 0 0 0 0.80 0
3 6 0 0 0 0.80 0
4 6 0 0 0 1.00 0
4 9 0 0 0 1.10 0
4 10 1 1 0 0.08 0
5 7 0 0 0 0.80 0
6 8 0 0 0 0.95 0
7 8 0 0 0 0.70 0
7 11 1 3 0 0.34 0
8 9 0 0 0 0.90 0
3
1 1 0.06
10 1 0.04
11 1 0.08
0.05
14
11
1 2 0 0.06 0
2 3 0 0.3 0
2 5 0 0.15 0
2 6 0 0.45 0
3 4 0 0.40 0
3 6 0 0.40 0
4 6 0 0.60 0
4 9 0 0.70 0
4 10 0 0.08 0
5 7 0 0.43 0
6 8 0 0.48 0
7 8 0 0.35 0
7 11 0 0.10 0
8 9 0 0.48 0
3
1 1 0.20
10 1 0.15
11 1 0.25
adik1310
|
|
|
|
|
If I had any control over these forums, I would ban you, ban your children and ban your childrens children.
Please don't ever post a message that size again.
As for your user name 'adik1310', I will never even bother to read your posts again.
Waldermort
|
|
|
|
|
nicely said Waldermort,
atleast, now he has to delete his post or repost it in short.
|
|
|
|
|
WalderMort wrote: If I had any control over these forums, I would ban you, ban your children and ban your childrens children.
Mwahaha  . You should have cursed him up to the seventh generation (that's the standard  ) !
|
|
|
|
|
Cedric Moonen wrote: You should have cursed him up to the seventh generation
LMAO, I guess I was kinda soft on him 
Waldermort
|
|
|
|
|
LMAO ?????
Please, to the english native speakers. Can you please write correctly? :P
Greetings.
--------
M.D.V.
If something has a solution... Why do we have to worry about?. If it has no solution... For what reason do we have to worry about?
Help me to understand what I'm saying, and I'll explain it better to you
|
|
|
|
|
|
Nice web the first result. I have added to favorites
Greetings.
--------
M.D.V.
If something has a solution... Why do we have to worry about?. If it has no solution... For what reason do we have to worry about?
Help me to understand what I'm saying, and I'll explain it better to you
|
|
|
|
|
plz solve tte assignment
|
|
|
|
|
|
Wow...what a lot of code!
Russell
|
|
|
|
|
f*ck off, a$$hole 
|
|
|
|
|
adik1310 wrote: SUBJECT : URGENT
1) Don't let your urgencies or emergencies become someone else's problem.
2) Don't post any code other than what is absolutely relevant.
3) Read here and here.
4) Before submitting your post, click the Preview button.
"A good athlete is the result of a good and worthy opponent." - David Crow
"To have a respect for ourselves guides our morals; to have deference for others governs our manners." - Laurence Sterne
|
|
|
|
|
easy...
Jemmy : Deadline? Pfft, a real programmer eats deadlines for breakfast. :P
Mark: I thought real programmers ignored deadlines 
Best wishes to Rexx[^]
|
|
|
|
|
Hai..Dear,
In VC++ ,I Opened a new cpp file, and i written the necessary codes,and i created workspace for that ...then i included .h files also...like this 4 .cpp & 4.h files are there in this project.
I have included #include windows.h in 2 of my .header file.
now it is showing the error
fatal error C1189: #error : WINDOWS.H already included. MFC apps must not #include windows.h
If i remove this header #include windows.h, then it is showing more than 50 errors...
what to do for this?
|
|
|
|
|
You need not to include windows.h file in MFC application. Check in the project propritey and in the general tab check for "use of MFC. if you are using MFC application it should show "MFC in a Shared DLL". If it is showing anything else change it to this and try it againg.
|
|
|
|
|
Actually i want to use non-mfc aplication only.
|
|
|
|
|
If you application is not the MFC. Then include the Windows.h file and change the Use of mfc from project property to "Use Standard Windows Libraries". Even after that if you getting the errors just write down what type of errors you are getting.
|
|
|
|
|
Hi...thanks for ur attention onmy query,
I am using CString kind of datatype in my code. so i need to include afx.h and afxwin.h and max of 5 afx related header files...
I think becos of this the error "windows.h is alredy defined " it is throwing...and in some other header file already i included windows.h...
what to do for this...
|
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
