|
Karasjok (north Norway), Wednesday next week: 40 degrees below zero. No need to tell whether it is C or F.
They are used to low winter temperatures in that area. Some years ago, with -52C, there was a fear that the power grid would break down (it didn't happen, but people joked that street lights were not needed - the glow from the power lines gave enough light). On TV, the mayor was asked what would be the consequence of a breakdown, and he answered with a perfectly straight face: Well, that would significantly reduce the difference between indoor and outdoor temperature.
Religious freedom is the freedom to say that two plus two make five.
|
|
|
|
|
Wow, stay safe and good luck.
As the aircraft designer said, "Simplicate and add lightness".
PartsBin an Electronics Part Organizer - Release Version 1.3.0 JaxCoder.com
Latest Article: SimpleWizardUpdate
|
|
|
|
|
2 + 5 = -40
|
|
|
|
|
good answer, mayor
reminds me of northern mn in winter
can be dangerous if not trained for it
"A little time, a little trouble, your better day"
Badfinger
|
|
|
|
|
jmaida wrote: reminds me of northern mn in winter I spent a high school year in MN - not up north, but near Redwood Falls; the winters can be quite bad there, too.
Coming from Norway, I was shocked to see quality of insulation ("Insulation", what's that?? ) in most houses. Sofas and chairs were moved away from outer walls, to the center of the room, to stay away from the ice cold walls. On the other hand, all houses had impressing huge oil furnaces.
This was in the late 1970s, and the houses were not put up last year. So things may have changed - although rumors are "Not that much!" Certainly, if the houses I saw then are still standing, I doubt that they have torn down the walls to add 12 in thick fiberglass mats in all outer walls and replaced the windows with 3-layer ones. If insulation is better nowadays, I expect it for new buildings, mostly.
I am today living in a 1959 vintage house. Even that far back, it was built with 8 in insulation mats in the wall (although that was 'high standard' in 1959).
Last time I referred to this, someone pointed to Canadian building standards, that are comparable to the Norwegian ones. I guess that enforcing such standards, even in MN, would be an unacceptable limitation of personal freedom .
Religious freedom is the freedom to say that two plus two make five.
|
|
|
|
|
Yeah, Redwood Falls gets those cold fronts coming across great plains from Canada. Brrrr.
I recall your previous discussion comparing insulation in Norway vs US.
Your observations are good. The new homes in Mn, especially northern parts, are now built with insulation everywhere. Floors, walls, etc.
Many furnaces still use oil, but there more using gas and/or electricity.
insulation is key.
Some of the older homes (not controlled by code) still use a paper-like insulation.
Actually works well if done right.
"A little time, a little trouble, your better day"
Badfinger
|
|
|
|
|
I wonder if anyone building a new house would consider incorporating a hypocaust - it may be old tech, but it certainly works!
Is fibreglass insulation the norm nowadays?
I live in a tropical country - so... "insulation?! what's that?"
Happiness will never come to those who fail to appreciate what they already have. -Anon
And those who were seen dancing were thought to be insane by those who could not hear the music. -Frederick Nietzsche
|
|
|
|
|
ChandraRam wrote: Is fibreglass insulation the norm nowadays? Here in Norway, it is the "norm", in the sense "most used". That is is what you compare the other alternatives to. I believe that #2 is the stuff with brand name "Rockwool" - I do not know the generic name. Its insulation qualities is similar to glass wool, but it is heavier, so if you live nearby a noisy road, it will give you better noise insulation. It also is practically speaking non-flameable; glass wool isn't too bad in case of a fire, but rockwool is better.
Variants of styrofoam are used, but in a fire it burns badly and can release toxic gases. So styrofoam is mostly used e.g. under concrete basement floors, protected against open fire. Between the basement floor and the ground you would usually use pebbles of expanded clay aggregate, commonly known as "LECA". I am planning an extension of my house; to satisfy the modern requirements of U-value < 0.1 for a floor (i.e. a loss of less than 0.1 W per square meter per delta K), I could use e.g. 30 cm LECA topped with 25 cm styrofoam, or 40 cm LECA and 20 cm styrofoam; styrofoam is almost three times as good an insulator as LECA, but a lot more expensive.
In the old days, outer walls were sometimes filled with sawdust, which is also a good (not excellent) insulator. In the old days, every farm had a wood saw, so the cost was next to zero. The problem is if it gets wet and start to rotten.
Today, there are numerous high-tech (read as: high cost) alternatives. None of them are ready to knock out glass wool as what everything is being compared to.
The biggest heat drain in the outer walls is the windows. So the maximum allowed U-value of 0.8 W/sqm*K requires, for all practical purposes, 3 layers of glass. Also, there is a strong focus on draft as an energy thief. For new houses, you will be living inside a sealed plastic bubble where no air can get in or out except in a very controlled manner through a ventilation system. At the final acceptance test for a new building, they actually do close all windows and vents and set the house under pressure to see if more air leaks out than what is tolerated. I am happy to live in an old house that is not a plastic bubble, even though it does leak some air out in winter, and in at other times of the year. (Nor am I obliged to honor that U<0.1 requirement for the basement floor of my extension, but I will do it to save on my power bill!)
Religious freedom is the freedom to say that two plus two make five.
|
|
|
|
|
trønderen wrote: On TV, the mayor was asked what would be the consequence of a breakdown, and he answered with a perfectly straight face: Well, that would significantly reduce the difference between indoor and outdoor temperature.
A politician that is both competent and intelligent. Better take a picture.
|
|
|
|
|
From CP newsletter
What comes after open source? Bruce Perens is working on it • The Register[^]
Basically an Open Source guy that wants a different license so it can't be abused.
And while doing that add in a whole lot of other stuff - like tracking usage.
Seems unlikely to me that anyone can design a system (or a law/regulation) which cannot be abused/misused. Intentionally or unintentionally.
|
|
|
|
|
My concept of "open source": Write something new; see if it sells; follow the life cycle ... then set it free. And then find something else to create.
"Before entering on an understanding, I have meditated for a long time, and have foreseen what might happen. It is not genius which reveals to me suddenly, secretly, what I have to say or to do in a circumstance unexpected by other people; it is reflection, it is meditation." - Napoleon I
|
|
|
|
|
|
Wordle 922 4/6
⬜🟨🟩⬜🟨
🟨🟩🟩🟨⬜
⬜🟩🟩🟩🟨
🟩🟩🟩🟩🟩
|
|
|
|
|
Wordle 922 4/6
🟨⬜⬜🟨⬜
🟨🟩⬜🟨⬜
⬜🟩🟩🟩🟩
🟩🟩🟩🟩🟩
|
|
|
|
|
Wordle 922 3/6*
⬜🟨🟩⬜🟨
🟩🟩🟩⬜⬜
🟩🟩🟩🟩🟩
Happiness will never come to those who fail to appreciate what they already have. -Anon
And those who were seen dancing were thought to be insane by those who could not hear the music. -Frederick Nietzsche
|
|
|
|
|
⬜🟨🟩🟨🟨
🟩🟩🟩🟩🟩
In a closed society where everybody's guilty, the only crime is getting caught. In a world of thieves, the only final sin is stupidity. - Hunter S Thompson - RIP
|
|
|
|
|
Wordle 922 3/6*
🟨⬛⬛🟨🟨
⬛🟩⬛🟨🟩
🟩🟩🟩🟩🟩
|
|
|
|
|
Wordle 922 3/6
🟨🟨⬛🟨🟨
🟩🟩🟩🟨⬛
🟩🟩🟩🟩🟩
Ok, I have had my coffee, so you can all come out now!
|
|
|
|
|
Wordle 922 2/6
⬛🟩🟩🟩⬛
🟩🟩🟩🟩🟩
Jeremy Falcon
|
|
|
|
|
I posted on this problem a few weeks ago, now it's back = but I figured it out!
For some strange reason, code collapse/expand just stopped working. I use this all the time. I use regions and always put them in same order in each file. That way, when I open a code file, all the regions are there and collapsed. That makes it really easy to find what I'm looking for.
Anyhow, for some reason CTRL+M,M just no longer worked. If I Right-Clicked the code, went down to Outlining, and selected 'Toggle Outline Expansion', it works. This shortcut menu option is marked with CTRL+M. It just doesn't work via the keyboard.
Well, I figured it out.
While working I have Skype open and I'm on a call. During the call the Mute was activated. The other person on the call was like 'Are you there???'. I go look, and Skype is muted. When I hover over the mute button it's hot key it CTRL+M.
While in VS and coding, and when I press CTRL+M,M - Skype intercepts that keypress and mutes the call - even though Skype isn't active.
In theory, theory and practice are the same. But in practice, they never are.”
If it's not broken, fix it until it is.
Everything makes sense in someone's mind.
|
|
|
|
|
You get a ten for having the presence of mind to notice the hot-key when mousing over the mute button!
Sounds to me as if Microsoft cares more about Skype users than Developers! Developers! Developers!
The difficult we do right away...
...the impossible takes slightly longer.
|
|
|
|
|
It sounds like crappy programming to me. An app's hot keys should be in force whenever the app has the focus. The idea that Skype intercepts key strokes when its not active is stupid.
In theory, theory and practice are the same. But in practice, they never are.”
If it's not broken, fix it until it is.
Everything makes sense in someone's mind.
|
|
|
|
|
|
Not necessarily. If you are sharing your screen via Skype, it may be filtering keystrokes globally to help manage the sharing. This might just be an unfortunate circumstance that could be solved by setting a different hot key in Visual Studio.
Software Zen: delete this;
|
|
|
|
|
Without developers there would be no Skype!
As the aircraft designer said, "Simplicate and add lightness".
PartsBin an Electronics Part Organizer - Release Version 1.3.0 JaxCoder.com
Latest Article: SimpleWizardUpdate
|
|
|
|
|