|
Do you know ther inf files are good?
You can use chkinf.exe to test them, its part of the DDK.
Morality is indistinguishable from social proscription
|
|
|
|
|
Not entirely sure if this is the right place to post this, but cant think of anywhere more appropriate.
I recently decided to get a new desktop to replace my recently deceased one. I decided to buy all the components and put the thing together myself, as it worked out considerably cheaper.
I set it all up, and turned it on. The only thing that happened was the fan CPU started spinning and the motherboard LED came on. After 30 seconds or so, the CPU fan turned off for 10 seconds or so and then started spinning again, continuing for the half hour I let it run.
However nothing appeared on the monitor at any time, and there were no BIOS warning beeps.
I cannot figure out what is wrong...
I have checked the wiring and pin configurations and it all seems correct.
Components:
320Gb SATA HDD
Asus P5KR motherboard
Intel Q6600 quad-core processor
4Gb DDR2 RAM
500W Antec Earthwatt power supply
8800GTS 640 Mb graphics card.
Any one have any idea how to fix it or anything i could try?
|
|
|
|
|
That somehow sounds like all is not right with your power switch etc.
Remove the "power" and "reset" connectors (the cables leading to the power and reset switches), then close the POWER contact with a pin.
Oh, and double check the position of all connectors on the MB.
If that does not work, try another power supply.
Different possible reason:
No or not enough heat is transferred from the die to the heat sink. Check if you have removed the plastic sheet from the underside of the heatsink. Check that the surface of the heatsink is plane. Remove all heat transfer materials (pad or paste), then use a silver-based transfer paste (small amount on the cpu, allow to spread by gently pressing the heatsink onto the CPU.
Cheers,
Sebastian
--
"If it was two men, the non-driver would have challenged the driver to simply crash through the gates. The macho image thing, you know." - Marc Clifton
|
|
|
|
|
if you do not see any things on monitor , i think your power supply has problem. check power supply pin out voltage with multi meter . first connect two pin with a wire for reson , it turn on.
|
|
|
|
|
next step if your power supply is correct then maybe your mother board has problem.
|
|
|
|
|
I have problem in internet connection. It works smoothly for some time. Then it hans and doesn't show window to disconnect the connection.What may be the problem?
|
|
|
|
|
Master Mind'z wrote: I have problem in internet connection. It works smoothly for some time. Then it hans and doesn't show window to disconnect the connection.What may be the problem?
What hangs?
The driver of ethernet adaptor hangs?
Or an Internet Explorer window hangs, a MSN messenger window, an FTP client window, etc. (any application with networking functions)?
And what is the window to disconnect the connection?
Maxwell Chen
|
|
|
|
|
Hi everyone
I have a problem with modem card I searched on the internet about this error but I didnt find any answer so I think its better I ask of you(because I said previous memmber's codeproject are very good).![Rose | [Rose]](https://codeproject.global.ssl.fastly.net/script/Forums/Images/rose.gif)
I have XP pack1,xp pack2,server 2003 pack2 and vista 64bit on my system when I want to connect to internet I get this error "There was no dial tone" in all windows except vista64bit on the vista I can connect to internet but I didnt get any voice of modem I remove drives and install again then I could connect to internet but when I restarted system and want to connect again I got this error again I think maybe problem is of Modem so I tested other modems (two modems of giga and a modem of Intel)but error was same so I tested an external modem and I didnt get any error and it works perfect now do you know where's problem (motherboard is Giga p35-ds3r).
Im very thanksful of you.
modified on Thursday, February 21, 2008 1:03 PM
|
|
|
|
|
Hi all,
I have a problem is "How do we share scanner on network?".
Please tell me that how can i share my scanner which is conected with one of my 5 pc's on Lan. i wants to share scanner for other users can access that scanner while the actual pc/pc user is busy in other work. if in this case any other want to scan the document then they can make it...
tell me how is this possible to share my scanner on lan like any printer.we r using windows XP.
Thanks,
Best regards,
Hy ChanHan
|
|
|
|
|
|
Dear Dave Kreskowiak,
I can't find any free software for scanners share on Network.
Do you have an other way to solve this problem?
Thanks,
Hy ChanHan 
|
|
|
|
|
|
Well, scanning with a standard scanner requires physical access to the scanner. Therefore, using more than one PC to scan is kinda difficult (as you'd have to get up to insert the documents, etc.)
However, Windows does not offer Scanner sharing, neither for USB nor parallel-port scanners.
In order to get a scanner into your network, you could go with one of two different ways:
For a USB-scanner: You may have success with a Ethernet-to-USB Bridge. Then, however, the current user needs to close the application to enable anyone else to use the scanner.
If you don't have a scanner yet: Buy a more pricey multifunctional device / photocopier. Some devices allow for their built-in scanner to be used over the network. This also means that, during the time the scan takes, noone will be able to use the device for anything else.
If you go really high-end (Canon iR 6000 etc.) you can have the copier put anything it scans to a network share as PDF files. Works like a charm.
Cheers,
Sebastian
--
"If it was two men, the non-driver would have challenged the driver to simply crash through the gates. The macho image thing, you know." - Marc Clifton
|
|
|
|
|
Oh,
and, of course:
USBIP, if you run linux on your boxes/a>[^]
Cheers,
Sebastian
--
"If it was two men, the non-driver would have challenged the driver to simply crash through the gates. The macho image thing, you know." - Marc Clifton
|
|
|
|
|
For some reason or another PREfast always crashes my script host. Has anybody come across this problem and know of a way to get it working?
My development env is Vista x64 ( with script host 5.7 ), VS2005 ( not that it matters ) and the latest WDK 6001.18000
Opening any build environment and typing "prefast /?" crashes, as does trying to run prefast.exe from a command line. According to the docs PREfast is supported on all OS's starting with winXP and I am unable to find anything about this problem on MSDN or google.
Waldermort
|
|
|
|
|
I seem to recall it just doesnt work on the 6000 DDK. We also use the 3790 DDK for 2k and XP and on that it works so if you want you can just check your code using that version.
Morality is indistinguishable from social proscription
|
|
|
|
|
I will have to install the 3790 DDK again, but I'm sure I had the same problem last time I used it. I hoped the issue would have been fixed in the 6000 release.
I'll re-install it now and see how it goes.
Waldermort
|
|
|
|
|
I am having the same problem. Here I'm using a Windows XP sp2. Did you manage to solve this problem?
|
|
|
|
|
Hi,
i am new to driver development. I want to know how mirror driver is working? What is miniport driver?
Ravi.
|
|
|
|
|
I want to add my own virtual printer driver to do my own process on that particular page.
any help would be appreciable , thanks in advance
|
|
|
|
|
Hi,
I am working on a project that receive command through a bluetooth and simulate keyboard input to a directx game. Any one got any idea to do this?
Must a go down all the ways to device driver writing?
Thanks in advance.
Regards,
Lau
18/02/2008
|
|
|
|
|
Look at SetWindowsHookEx(). You can inject a dll into another process and have it generate keystrokes in that process. It works very well.
Morality is indistinguishable from social proscription
|
|
|
|
|
Hi,
i'm also trying to develop another game controled from bluetooth remotes. (the guy who asked me to do so wants me to make the game payable by about 30 different players !!! ) i think he wants to simulate a tv show !!!
i also need info about programming in full screen mode, AND dual screen (one screen for playing the game, and the other --> i think the 1st one will be used to manage another part of the game. it's a kind of "who wants to be a billionaire" game. the 1st screen won't be used all the time, but in the case that new questions will be changed or added or deleted.
i don't have a big development experience, so i think that my first steps will be to gather good info and docs before starting to code (i think that coding is one of the last steps) anyway, if i start coding now, i won't ever know how to handle this project !
first i have to know wich libraries i'll use, why, and how i will use them.
and also before, i'll have to choose a language (i think i'll use c++, but it's only a pre-choice).
the just nex things i'll do is SEARCH SEARCH SEARCH !!!
of course, i'll have a look at the (i'm shameful since i don't even remember the name of the thing to manage bluetooth inputs that "i don't remember his login" talked about.)
bye !
www.youme-tech.com (in french written)
|
|
|
|
|
Ok, last resort here.
Home network layout:
[] hardware
- wired connection
... wirless connection
[CableModem]-[Router]-[PC_1 WinXP x86]
-[WRT54GX2]...
...[WET54G]-[BEFSR81]-[PC_2 WinXP x64]
...[PC_3 WinXP x86 (built-in WiFi)]
...[iPaq 3835 PPC2002 (WL110)]
All the PC_*, and iPaq, are receiving IP's via DHCP from Router.
All the PC_* can see each other and the internet.
The iPaq can see the internet, PC_1 and PC_3, but _NOT_ PC_2.
When the iPaq tries to access PC_2 the network lights on the BEFSR81 flicker but no packets are passed to PC_2 and the connection attempt times out.
PC_2 is not running any firewall software (XP firewall is off).
BEFSR81 is set to run as just a switch.
This layout used to work, but iPaq and PC_2 have both been reinstalled recently.
[SOLVED]
Turns out the WET54G had rebooted at some point and the SSID stayed the same but the IP was set back to the default 192.168... which didn't match the network. Setting the IP fixed all.
[/SOLUTION]
...cmk
The idea that I can be presented with a problem, set out to logically solve it with the tools at hand, and wind up with a program that could not be legally used because someone else followed the same logical steps some years ago and filed for a patent on it is horrifying.
- John Carmack
modified on Friday, February 15, 2008 10:25 AM
|
|
|
|
|
I have been looking for a way in C++ to read the raw output levels sent to the DAC on a sound card for some time now. It would seem the only way to do this for Win2000 (and beyond) is to somehow access the kernel mixer and read the output. I know that I can't forcefully access the kernel space from a user-level application, but is there some entry point to query this information? I do not have too much experience in programming kernel processes, and I cannot find any clarification of KMixer.sys (other than people complaining about sound issues), but any explanation as to the functions that would do this in C++, the proper direction to take, or even suggestions for education on this topic or overall theory would be greatly appreciated!
modified on Saturday, February 9, 2008 9:38 PM
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
