|
I also am in the position of looking for employment. I believe, what potential employers are looking for is people that can espouse what they know, are willing to search out what they don't know and learn it, but more importantly, they are looking for people who fit well within their organization. If you don't confidently know the answer to the question, indicate that but, also indicate that you will be checking to make certain.
Phil
|
|
|
|
|
Hi!
I've a little strange problem with ReportViewer.
It works at my PC,but when I install my application on the client PC it only shows "Report is being generated" and that's all.No tables,no charts, no data!?!?!
If someone can tell me what could be the problem?-any required .dll may be,or...?
Thanks!
|
|
|
|
|
Just see if you are getting rsAccess denied error, this means that you are not able to properly do the authentication with report server.
Let me know details of the error?
Regards,
Jaiprakash M Bankolli
jaiprakash.bankolli@gmail.com
|
|
|
|
|
I had the same problems and I deployed the dlls to the machine where the application is to be deployed and it did not fix the problem at all. It seemed at first but created Exceptions. I tried to deploy all the dlls and it was to no use.
I spent days pulling my hair over this and I finally found the solution to it and I want to share that with you. The problem I had was with Visual Studio 2005 Professional. It seems to me that it needs updating.
Do following:
Go to http://support.businessobjects.com/downloads/merge_modules.asp#07 and download the Crystal Reports for .NET Framework 2.0 Redistributable Package (x86) (other versions are available for 64 bit machines), which contains the CrystalReportRedist2005_x86.msm file when unzipped. Unzip it and you will also get a word document which explains what to do in a very well illustrated way 
^%^&*(&^
|
|
|
|
|
Hi
I am developing a web page that has a functionality to zip and upload.
For this i am using winzip and winrar.
I need all the commands and switches used in the command line for Winzip and Winrar.
For example:
Winzip.exe a -ep1 -r myfile.txt myzip.zip
I need what is the use of each switch like -a, -ep1, -r.
Is there any good link for this?
Gg
Gg
|
|
|
|
|
2 points.
- This is a .NET forum. How is this related to .NET?
- Why haven't you gone to the winzip/winrar sites for this information?
Deja View - the feeling that you've seen this post before.
|
|
|
|
|
Sorry for posting here.
I could not find details from winzip/winrar sites. And I am deleloping a web pages that has capability to compress files. And I am using .NET for this. And I hoped if someone may did this. That's why I posted here and I got the result.
Thank you
Gg
|
|
|
|
|
Have you even thought of opening both those applications and hitting F1 to get the Help files for them?? I'm willing to bet that everything you're looking for is sitting right in front of you.
Dave Kreskowiak
Microsoft MVP
Visual Developer - Visual Basic
2006, 2007
|
|
|
|
|
Thank you Dave
I got the details by hitting F1.
Gg
|
|
|
|
|
Hi all,
I have a javascript function written in html block of aspx page. I have string vairible declared in it, when I try to print it on a paper its printing whole page, instead of printing that string variable only. Can anybody please suggest me or give me some code snippet how to do it. If possible give me the code snippet for 2-browsers Mozilla and IExplr
My code is as below :
function printdoc(text)
{
var lbl="<%=str4%>";
if (lbl == "Valid")
{
var lbl1="<%= str1 %>";
text=lbl1;
print(text);
}
else
{
alert("Bio-metrics have not been done");
}
}
Can anybody please tell me how to do it. Thank you.
Regards,
Aleem.
S/W Engineer
Akebono Soft Technologies
aleem_abdul@akebonosoft.com.
|
|
|
|
|
OK - by now you know that cross posting is going to get you flamed. I'm feeling in a good mood however, so I'll give you the following hints.
The javascript function to print is called window.Print, so it prints the current web page. In order to print just one page, you need to copy the item into a new page and print that page.
Alternatively, (and this is a much better way), you can specify what you want printing through clever use of CSS. Take a look at the <LINK... media="Print" /> tag by searching for it on Google.
Deja View - the feeling that you've seen this post before.
|
|
|
|
|
Hi,
I am currently using VS 2005 (.NET 2.0) and want to install the .NET 3.0 framework and start working on it.
I have installed the .NET 3.0
Now i am told that i will need to install the Windows SDK and .NET 3.0 components and then
install the VS 2005 extensions for the .NET 3.0
When reading through the Windows SDK install link in MS site, it is suggesting to do several things, including un-installing the current Windows SDK and also says there are several known issues around this install.
It is also asking to uninstall existing stuff like Document explorer etc. which i use with VS 2005 (for documentation).
And the list of things to do looks pretty long 
The current machine is my production machine where i develop 2.0 based apps / controls and i want to be careful when installing the 3.0, especially the Windows SDK.
Can anybody share their experience on this bit - i.e. the Windows SDK instalaation bit.
Oncei get over this step, i can happily install the 3rd bit - i.e. the VS extensions for .NET 3.0 and have fun with .NET 3.0 fluff
|
|
|
|
|
If your just going to play with .NET 3.0 don't install it on your production machine. Install something like VirtualPC, install Windows on a new virtual machine, then Visual Studio .NET 2005 and all the .NET stuff. That way, you can play all you want safely without screwing up your production environment.
Dave Kreskowiak
Microsoft MVP
Visual Developer - Visual Basic
2006, 2007
|
|
|
|
|
"That way, you can play all you want safely without screwing up your production environment."
Why??? Is .NET 3.0 not RTM'ed yet? It is RTM!!!!!! I would be worried only if it was a RCs or Betas, but with RTM release, MS should ensure that it does not screw up any production environment, especially the .NET 2.0 system. If they cannot assure that, they should not be releasing .NET 3.0 as RTM at all. They should keep it as Beta if the developer community will have to be cautious to use it in production machines running 2.0 framework (or use it via Vistual PC etc.).
|
|
|
|
|
While .NET 3 is release, some of the Visual Studio extensions are CTP.
Deja View - the feeling that you've seen this post before.
|
|
|
|
|
Ahh! That explains the fear! Thanks. 
|
|
|
|
|
Glad to help.
Deja View - the feeling that you've seen this post before.
|
|
|
|
|
It's not so much fear. It's also the fact that you can easily screw up writing code that works fine under .NET 3.0, but will screw over his .NET 2.0 project if needs to make updates to it.
If you still have to maintain that .NET 2.0 codebase you're better off dedicating one development environment to developing for .NET 2.0 and another for .NET 3.0.
Dave Kreskowiak
Microsoft MVP
Visual Developer - Visual Basic
2006, 2007
|
|
|
|
|
Hello,
Strange problem with my visual studio.
I have typed datasets in the designer. I have table adapters that i have dragged from the server explorer. I have used these for the last couple of month. I have added queries, stored procedures, added and deleted fields in the table adapters.
Now, I added an extra column to one of my tables in sql server 2005. I right clicked the relevant table adapter and clicked configure, and included the extra column.
I build the program, but the changes to the table adapter does not reflect in the code. When I do the following: tableAdapter.insert() the extra column has not been included.
I tried this with another table adapter in the dataset designer by adding a new field. The same problem.
I used rebuild, i have deleted the table adapter and added a new one. I have restarted VS, and also restarted the computer. I have also opened the project on another machine. I have deleted the table adapter from the form designer and added a new one from the components tab. And still the same problem.
When I preview the data, the extra column is there. But not when I use it in code.
Can anyone please tell if they know about this problem and is there a way to solve it.
Many thanks if you can.
Steve
|
|
|
|
|
You required to reconfigure the Typed dataset, I had faced same problem what I did was I had regenerated the designer class from the tool. The problem here is you will have the old designer which not getting regenerated.
So either try to regenerate it or recreate the complete typeddataset which will have tableadaptor etc
Regards,
Jaiprakash M Bankolli
jaiprakash.bankolli@gmail.com
|
|
|
|
|
hi..
how to draw a line on image
can any one answer to this query..
its very urgent
thanks & regards
|
|
|
|
|
Take a look at DrawLine.
Deja View - the feeling that you've seen this post before.
|
|
|
|
|
What exactly is the requirement? Do you want to underline the image or border it etc ?
Regards,
Jaiprakash M Bankolli
jaiprakash.bankolli@gmail.com
|
|
|
|
|
Hi
I am trying to use the LB_GETTEXT method to get the contents of a listbox in Visual Basic .NET 2005 (.NET Compact Framework 1.0)
So far I have tried:
Dim iItems, iCount As Integer<br />
<br />
Dim Line As String<br />
Dim LineHandle As GCHandle = GCHandle.Alloc(Line, GCHandleType.Pinned)<br />
Dim ptr As Integer = LineHandle.AddrOfPinnedObject.ToInt32()<br />
<br />
iItems = SendMessage(handle, LB_GETCOUNT, 0, 0) <br />
For iCount = 0 To iItems - 1<br />
SendMessage(handle, LB_GETTEXT, iCount, ptr)<br />
Next<br />
<br />
LineHandle.Free()
However Line is always empty.
What on earth am I doing wrong?? Is it something to do with the way I pass the pointer to the string??
Many thanks,
Andy
|
|
|
|
|
I have VS 2003/2005 "concole application" project written in C++.
Is it possible to convert that project to VB.NET concole application project?
Regards Arthur S.
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
