|
How to make program that from given numbers calculate give value or if he can't calculate that value he should find closest to that value?
Design of program: [^]
In first three labels is random generated three-digit number,in second four labels are random generated numbers can be from 1 to 9,in third label random generated numbers can be(10,15 or 20) in fourth label random generated numbers can be (25,50,75 or 100).
When user enter expression computer must calculate it and tell him what he calculated.User also cannot enter numbers that were not random generated inside labels.
After that computer must calculate expression and show steps how did he made it or if he can't calculate give random number from first three labels it should calculate closest to that value and show steps how did he calculated it.
When all these number are generated user have 60 seconds to make expression from give numbers,if time expires user enter expression if didn't enter it earlier and if he does have or doesn't have same number as in first three labels then he got points based on:
1.If he has same number as in first three labels he gets 30 points
2.If number is different for one he gets 20 points
3.If number is different for five he gets 10 points
4.If number is different for ten he gets 5 points
5.If difference if less than the number offered he gets additional 5 points
modified 10-Dec-16 14:11pm.
|
|
|
|
|
We won't do your homework for you.
|
|
|
|
|
You don't need to write program just help me?
|
|
|
|
|
Pavlex4 wrote: just help me
Help you with what? You just posted your homework assignment here in hopes that someone would do it for you. We aren't going to. Read the sticky post for "How to get an answer to your question". You didn't ask a question yet. If you do not understand your homework assignment, ask your teacher, crack open your textbook, start reading and pay attention in class.
Speed of sound - 1100 ft/sec
Speed of light - 186,000 mi/sec
Speed of stupid - instantaneous.
|
|
|
|
|
How computer can make expression from random numbers?
|
|
|
|
|
What sort of expression are you talking about?
|
|
|
|
|
For example random number to be found is 435 and numbers available to found that number are:
6, 9, 3, 8, 15, 100
Computer should find it like this: 435 = (9 + (3 * (100 + (6 * (15 - 8))))) and show that steps in textbox
Or for example random number to be found is 945 and numbers available to found that number are:
3,2,1,2,10,25 computer can't find that number but he can find closest to that number:
944=2*(25*(2*10-1)-3) and show that steps in textbox
|
|
|
|
|
Please don't post the same thing twice if it doesn;t appear immediately: the automated system has taken a dislike to you and has started moderating your posts. Which means they need to be reviewed by a human before they are published.
And to back up what the others say: you need to at least make a start of your homework before you ask questions on it: you are starting to show a frightening lack of knowledge for the level of questions you are trying to get help with (as well as coming over as a Help Vampire, which is not a good thing at all).
Give it a try yourself, and only ask specific questions if you get stuck - you won't learn anything much otherwise.
Bad command or file name. Bad, bad command! Sit! Stay! Staaaay...
|
|
|
|
|
Since you have removed the two messages below, I will respond to this one. Please note well: this is your homework assignment and you are expected to do the work. Designing and writing your own code is what a developer's job is all about. Trying to get other people to do it for you is not acceptable - in any occupation.
|
|
|
|
|
He didn't - they went to moderation - I suspect it's become sentient and is considering him a Help Vampire ... 
I'll tidy up the spare.
Bad command or file name. Bad, bad command! Sit! Stay! Staaaay...
|
|
|
|
|
Might be due to the spam filter - I've fallen victim to it before. However, this question reminds me of a question I saw in the "Unanswered Questions" section today which I can't seem to find anymore. +1 for the homework statement as this problem has obviously been given no thought by the poster. Given effort I'd try to help as would most of CP I assume.
|
|
|
|
|
We do not do your HomeWork.
HomeWork is not set to test your skills at begging other people to do your work, it is set to make you think and to help your teacher to check your understanding of the courses you have taken and also the problems you have at applying them.
Any failure of you will help your teacher spot your weaknesses and set remedial actions.
So, give it a try, reread your lessons and start working. If you are stuck on a specific problem, show your code and explain this exact problem, we might help.
As programmer, your job is to create algorithms that solve specific problems and you can't rely on someone else to eternally do it for you, so there is a time where you will have to learn how to. And the sooner, the better.
When you just ask for the solution, it is like trying to learn to drive a car by having someone else training.
Creating an algorithm is basically finding the maths and make necessary adaptation to fit your actual problem.
Pavlex4 wrote: How to make program that from given numbers calculate give value or if he can't calculate that value he should find closest to that value?
Build an algorithm that try every possible combinations of the numbers and allowed operations and remember best result.
Patrice
“Everything should be made as simple as possible, but no simpler.” Albert Einstein
|
|
|
|
|
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using System.Threading.Tasks;
namespace Expression_Evaluator
{
class Program
{
static int[] ReadInput(out int value)
{
Console.Write("Enter integer numbers to use (space-separated): ");
string s = Console.ReadLine();
string[] parts = s.Split(new char[] { ' ' }, StringSplitOptions.RemoveEmptyEntries);
int[] a = new int[parts.Length];
for (int i = 0; i < a.Length; i++)
a[i] = int.Parse(parts[i]);
Console.Write("Enter integer value to calculate: ");
value = int.Parse(Console.ReadLine());
return a;
}
static void SolveAndPrint(int[] numbers, int targetValue)
{
int targetKey = (targetValue << numbers.Length) + (1 << numbers.Length) - 1;
HashSet<int> solvedKeys = new HashSet<int>();
Dictionary<int, int> keyToLeftParent = new Dictionary<int, int>();
Dictionary<int, int> keyToRightParent = new Dictionary<int, int>();
Dictionary<int, char> keyToOperator = new Dictionary<int, char>();
Queue<int> queue = new Queue<int>();
for (int i = 0; i < numbers.Length; i++)
{
int key = (numbers[i] << numbers.Length) + (1 << i);
solvedKeys.Add(key);
queue.Enqueue(key);
}
while (queue.Count > 0 && !solvedKeys.Contains(targetKey))
{
int curKey = queue.Dequeue();
int curMask = curKey & ((1 << numbers.Length) - 1);
int curValue = curKey >> numbers.Length;
int[] keys = new int[solvedKeys.Count];
solvedKeys.CopyTo(keys);
for (int i = 0; i < keys.Length; i++)
{
int mask = keys[i] & ((1 << numbers.Length) - 1);
int value = keys[i] >> numbers.Length;
if ((mask & curMask) == 0)
{
for (int op = 0; op < 6; op++)
{
char opSign = '\0';
int newValue = 0;
switch (op)
{
case 0:
newValue = curValue + value;
opSign = '+';
break;
case 1:
newValue = curValue - value;
opSign = '-';
break;
case 2:
newValue = value - curValue;
opSign = '-';
break;
case 3:
newValue = curValue * value;
opSign = '*';
break;
case 4:
newValue = -1;
if (value != 0 && curValue % value == 0)
newValue = curValue / value;
opSign = ' ';
break;
case 5:
newValue = -1;
if (curValue != 0 && value % curValue == 0)
newValue = value / curValue;
opSign = ' ';
break;
}
if (newValue >= 0)
{
int newMask = (curMask | mask);
int newKey = (newValue << numbers.Length) + newMask;
if (!solvedKeys.Contains(newKey))
{
solvedKeys.Add(newKey);
if (op == 2 || op == 5)
{
keyToLeftParent.Add(newKey, keys[i]);
keyToRightParent.Add(newKey, curKey);
}
else
{
keyToLeftParent.Add(newKey, curKey);
keyToRightParent.Add(newKey, keys[i]);
}
keyToOperator.Add(newKey, opSign);
solvedKeys.Add(newKey);
queue.Enqueue(newKey);
}
}
}
}
}
}
if (!solvedKeys.Contains(targetKey))
Console.WriteLine("Solution has not been found.");
else
{
PrintExpression(keyToLeftParent, keyToRightParent, keyToOperator, targetKey, numbers.Length);
Console.WriteLine("={0}", targetValue);
}
}
static void PrintExpression(Dictionary<int, int> keyToLeftParent, Dictionary<int, int> keyToRightParent, Dictionary<int, char> keyToOperator,
int key, int numbersCount)
{
if (!keyToOperator.ContainsKey(key))
Console.Write("{0}", key >> numbersCount);
else
{
Console.Write("(");
PrintExpression(keyToLeftParent, keyToRightParent, keyToOperator,
keyToLeftParent[key], numbersCount);
Console.Write(keyToOperator[key]);
PrintExpression(keyToLeftParent, keyToRightParent, keyToOperator,
keyToRightParent[key], numbersCount);
Console.Write(")");
}
}
static void Main(string[] args)
{
while (true)
{
int value;
int[] numbers = ReadInput(out value);
SolveAndPrint(numbers, value);
Console.Write("More? (y/n) ");
if (Console.ReadLine().ToLower() != "y")
break;
}
}
}
}
modified 11-Dec-16 12:34pm.
|
|
|
|
|
Pavlex4 wrote: how to not use all values to make expression
After each single operation, you have to check if the last result is a better solution against the 3 targets. If a better solution, save it, then , continue search.
Patrice
“Everything should be made as simple as possible, but no simpler.” Albert Einstein
|
|
|
|
|
I have problem with database ,I am using cyrillic words inside it and when I start program instead of random word it shows "????????????"
|
|
|
|
|
Check your data: the chances are you have set your SQL column as VARCHAR, which doesn't hold Unicode data, or - gawd forbid - you used string concatenation to load the DB with your data.
You need a NVARCHAR column for Unicode, and should always use parameterised queries.
Bad command or file name. Bad, bad command! Sit! Stay! Staaaay...
|
|
|
|
|
It was set to nvarchar(13)
|
|
|
|
|
And? How did you insert the data, how did you fetch it? How did you display it?
Bad command or file name. Bad, bad command! Sit! Stay! Staaaay...
|
|
|
|
|
First I create table like this:
CREATE TABLE table1
(
Reci nvarchar(13)
);
And inserted data like this:
INSERT INTO table1 VALUES ('заступниство');
INSERT INTO table1 VALUES ('затровавање');
INSERT INTO table1 VALUES ('заустављати');
INSERT INTO table1 VALUES ('заварљивост');
INSERT INTO table1 VALUES ('земљорадник');
INSERT INTO table1 VALUES ('земљорадња');
INSERT INTO table1 VALUES ('згњецавање');
INSERT INTO table1 VALUES ('згусњавање');
INSERT INTO table1 VALUES ('злонамерност');
INSERT INTO table1 VALUES ('злостављати');
INSERT INTO table1 VALUES ('зверокрадица');
.........
I display it like this:
string cs= @"Data Source=(LocalDB)\MSSQLLocalDB;AttachDbFilename=C:\Users\Pavle\Documents\Visual Studio 2015\Projects\Test slagalica\Test slagalica\Slagalica-DB-Cirilica.mdf;Integrated Security=True";
string queryString = "SELECT * FROM table1 WHERE LEN(Reci) >=10 AND LEN(Reci) <=12 ORDER BY NEWID()";
using (SqlConnection connection = new SqlConnection(cs))
{
SqlCommand mycommand = new SqlCommand(queryString, connection);
try
{
connection.Open();
string word = (string)mycommand.ExecuteScalar();
label14.Text = word;
promesana_rec = new string(word.ToUpper().OrderBy(r => random.Next()).ToArray());
textBox2.Text = promesana_rec.ToUpper();
}
catch (Exception ex)
{
MessageBox.Show(ex.Message);
}
}
|
|
|
|
|
And there is your problem: those are not Unicode strings: they are VARCHAR strings, which are basically ASCII and hold eight bit characters instead of 16 bit Unicode values. NVARCHAR strings are prefixed with N:
INSERT INTO table1 (Reci) VALUES (N'заступниство');
Do yourself couple of favours as well:
1) Add two more columns to your table:
CREATE TABLE table1
(
ID [INT] IDENTITY(1,1) NOT NULL,
Reci nvarchar(13) NOT NULL,
WordLen INT NOT NULL
); Storing the word length once is a lot more efficient than processing the string length twice each time you want to retrieve it, for a minimal extra storage overhead.
2) If you only want one word, only retrieve one word:
SELECT TOP 1 Reci FROM Table1 ... Otherwise you fetch all records that match, wether you need them or not.
3) Get into the habit of listing the columns you are going to insert / select - it can save a lot of frustration later when you accidentally insert to the wrong columns because you forgot the order...
4) SqlCommand objects should also be Disposed, not just SqlConnections.
5) Don't hard code connection strings - store them in a settings file so you don't have to recompile to change the DB source.
6) Be aware that ATTACH is a special "developer" mode: you should normally let SQL handle the DB completely, and not try to ATTACH it. ATTACH only works in Express editions for just that reason...
Bad command or file name. Bad, bad command! Sit! Stay! Staaaay...
|
|
|
|
|
When I add (N) before word it started working!!!
Thank you very much!!!
|
|
|
|
|
You're welcome!
Bad command or file name. Bad, bad command! Sit! Stay! Staaaay...
|
|
|
|
|
How to check if entered textbox value exist in SQL server Database?If it exist it should print "the entered value exist in database.
|
|
|
|
|
|
Can it be done like this:
using (SqlConnection connection = new SqlConnection(cs))
{
SqlCommand cmd = new SqlCommand("SELECT * FROM table1 WHERE Reci='" + textBox1.Text + "'", connection);
try
{
connection.Open();
SqlDataAdapter da = new SqlDataAdapter(cmd);
DataSet ds = new DataSet();
da.Fill(ds);
int j = ds.Tables[0].Rows.Count;
if (j == 0)
{
MessageBox.Show("word" + textBox1.Text + "already exists!");
ds.Clear();
}
}
catch (Exception ex)
{
MessageBox.Show(ex.Message);
}
}
|
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
