C# Discussion Boards - CodeProject

Re: Why do I get a "Cross thread" Exception?

David8001C23-Jul-09 8:49

David8001C

23-Jul-09 8:49

@Luc Pattyn

yeah, isnt the picture great Smile | :)

Unfortuntly I dont have the code avaiible otherwise I would have posted it.

Anyway, as I see it the two Queues are in thread "neutral" lands. So if "Main" thread assigns a Eventlistener to the resultQueue it should be the "Main" thread that gets the event.

bases on the error it must be the Database worker thread that somehow manages to execute the OnnewResult() function!?

Re: Why do I get a "Cross thread" Exception?

Luc Pattyn23-Jul-09 9:03

Luc Pattyn

23-Jul-09 9:03

raising an event is just like calling a method, it happens on the thread that executes the code; here the thread that calls enqueueWithEvent, and that is clearly the same one doing the DoWork() stuff, which is bound to be a threadpool thread, as BGWs run on them, not on the main thread.

You can hope and dream all you want, but you have to make it happen. As I said, use either Controle.Invoke or BGW.ReportProgress; for a general-purpose queue, it has to be Control.Invoke

There is one alternative, rather than telling the queue about your Controls, give the queue an event, and let your Form wire a delegate to it, where the delegate itself does the necessary Invoke stuff (after all, to be a proper queue the queue does not have to know about a GUI, all it needs is a way to signal its customers, and that is events+delegates).

Smile | :)

Luc Pattyn [Forum Guidelines] [My Articles]

The quality and detail of your question reflects on the effectiveness of the help you are likely to get.
Show formatted code inside PRE tags, and give clear symptoms when describing a problem.

Re: Why do I get a "Cross thread" Exception?

David8001C23-Jul-09 9:11

David8001C

23-Jul-09 9:11

First off, Im really greatful for your answers!

The thing is that Im not really understanding my own code, im quite a noob when it comes to threading. Thats why i "push" you to explain my design errors.

I will have a look at the "delegates" thing and have another go at this.

Thanks again!

Re: Why do I get a "Cross thread" Exception?

Luc Pattyn23-Jul-09 9:21

Luc Pattyn

23-Jul-09 9:21

David8001C wrote:
Im not really understanding my own code

That is unacceptable. It is hard enough when you think you do understand your code and it sometimes doesn't do what you expect.

Here is some great advice[^] for you Big Grin | :-D

Luc Pattyn [Forum Guidelines] [My Articles]

The quality and detail of your question reflects on the effectiveness of the help you are likely to get.
Show formatted code inside PRE tags, and give clear symptoms when describing a problem.

Re: Why do I get a "Cross thread" Exception?

Luc Pattyn23-Jul-09 13:12

Luc Pattyn

23-Jul-09 13:12

Hi David,

I just finished a little article on the cross-thread problem, so here[^] is a read for you. It does assume you are familiar with delegates though. I might create an article on delegates and events at some other time.

Smile | :)

Luc Pattyn [Forum Guidelines] [My Articles]

The quality and detail of your question reflects on the effectiveness of the help you are likely to get.
Show formatted code inside PRE tags, and give clear symptoms when describing a problem.

Re: Why do I get a "Cross thread" Exception?

PIEBALDconsult23-Jul-09 8:42

PIEBALDconsult

23-Jul-09 8:42

Read the documentation.

You'll need to check InvokeRequired and Invoke as needed.

How to copy assembly from GAC to local drive ?

hdv21223-Jul-09 8:06

hdv212

23-Jul-09 8:06

Hi Is there any way to copy assmeblies that registered in GAC to local drive ?
thanks

Re: How to copy assembly from GAC to local drive ?

Ian McCaul23-Jul-09 8:20

Ian McCaul

23-Jul-09 8:20

Yes through the command prompt.

Re: How to copy assembly from GAC to local drive ?

stancrm23-Jul-09 9:17

stancrm

23-Jul-09 9:17

yes, command prompt or free commander (like windows explorer)

Re: How to copy assembly from GAC to local drive ?

Abhijit Jana23-Jul-09 10:13

Abhijit Jana

23-Jul-09 10:13

hdv212 wrote:
Is there any way to copy assmeblies that registered in GAC to local drive ?

Lets you want to copy System.Data.dll from GAC [ Just for Example ]

Open Command Prompt.
Move to Directory
C:\WINDOWS\assembly\GAC_32\System.Data\2.0.0.0__b77a5c561934e089>
Use DIR

07/04/2009  04:12 PM <DIR>          .
07/04/2009  04:12 PM    <DIR>          ..
07/04/2009  04:12 PM         x,xxx,xxx System.Data.dll
               1 File(s)      x,xxx,xxx bytes
               2 Dir(s)  xx,xxx,xxx,xxx bytes free

Now use Copy command to copy the System.Data.Dll

cheers,
Abhijit
CodeProject MVP
Web Site:abhijitjana.net
When you ask a question, remember to click "Good Answer", If the Answer is helps you.

Little conversion problem from visual basic to c#

Member 474292223-Jul-09 7:42

Member 4742922

23-Jul-09 7:42

Hello everyone,

2 days ago i bought a relays card wich is controlled by rs232 ComPort.
It works with the suplied software, that's written in visual basic.
But i code in visual c#, so i downloaded visual basic but i have som problem understanding how to convert sertan things from visual basic to c#.
i will post some code and hope someone could help me out, the problem is in a byte buffer, wich wil sent the commands to my serial port.

Send_buffer(0) = 2                               ' Get Ports
Send_buffer(1) = 0                               ' Broadcast
Send_buffer(2) = 0
Send_buffer(3) = Send_buffer(0) Xor Send_buffer(1) Xor Send_buffer(2)

SerialPort1.Write(Send_buffer, 0, 4)

i know a little bit what is happening here, but i dont know how to use it in c# thanks so far;) Laugh | :laugh:

Re: Little conversion problem from visual basic to c#

0x3c023-Jul-09 7:48

0x3c0

23-Jul-09 7:48

Okay, the first four lines are arrays. That mean that you can refer to them like you do in VB, but the brackets need to be square [] instead of curly (). XOR is a logical operator, the equivalent in C# is the ^ symbol. The method call is the same. Don't forget the semicolons at the end of every statement

As to what happens on a high level, you simply fill a small array with numbers and send it over a serial port

Between the idea
And the reality
Between the motion
And the act
Falls the Shadow

Re: Little conversion problem from visual basic to c#

PIEBALDconsult23-Jul-09 7:58

PIEBALDconsult

23-Jul-09 7:58

Computafreak wrote:
instead of curly ().

Parentheses () aren't curly, braces {} are.

Re: Little conversion problem from visual basic to c#

0x3c023-Jul-09 8:02

0x3c0

23-Jul-09 8:02

Ah, my terminology is a bit off. To me, () are curly, [] are square, {} are squiggly. Unsurprisingly, I feel rather silly when I talk about programming syntax Blush | :O

Between the idea
And the reality
Between the motion
And the act
Falls the Shadow

Re: Little conversion problem from visual basic to c#

Member 474292223-Jul-09 8:09

Member 4742922

23-Jul-09 8:09

i now have this:

ArrayList al = new ArrayList();
     al[1] = 8;
     al[2] = 1;
     al[3] = 3;
     al[4] = 8 ^ 1 ^ 4;

     serialPort1.Open();
     serialPort1.Write(al, 0, 4);
     serialPort1.Close();

but it returns this error:
Error 2 Argument '1': cannot convert from 'System.Collections.ArrayList' to 'byte[]' C:\Users\Clean Totaal\AppData\Local\Temporary Projects\WindowsFormsApplication1\Form1.cs 31 31 WindowsFormsApplication1
What is going wrong?

Re: Little conversion problem from visual basic to c#

OriginalGriff23-Jul-09 8:17

OriginalGriff

23-Jul-09 8:17

Using your example above try (remember arrays are zero based in c#, not 1):

byte[] ab = new byte[4];
ab[0] = 8;
ab[1] = 1;
ab[2] = 3;
ab[3] = ab[0] ^ ab[1] ^ ab[2];
serialPort1.Open();
serialPort1.Write(ab, 0, 4);
serialPort1.Close();

No trees were harmed in the sending of this message; however, a significant number of electrons were slightly inconvenienced.

This message is made of fully recyclable Zeros and Ones

Re: Little conversion problem from visual basic to c#

Member 474292223-Jul-09 8:25

Member 4742922

23-Jul-09 8:25

Thank YOU its working!! Big Grin | :-D

Re: Little conversion problem from visual basic to c#

PIEBALDconsult23-Jul-09 8:37

PIEBALDconsult

23-Jul-09 8:37

byte[] al = new byte [ 4 ] ;

if someone could help me identify the problem please. [modified]

DinoRondelly23-Jul-09 7:20

DinoRondelly

23-Jul-09 7:20

Here is my Code

using System;
using System.Collections.Generic;
using System.Text;
using System.IO;
using System.Data.Odbc;
using My;
using System.Data;

namespace FirstCitizensBank_DropOffReport
{
    class Program : MyGeneral
    {
        public static string dataBasePath;
        public static string dbname;
        public static string strconn;
        static void Main(string[] args)
        {
            StartUp("", "", true);
            dataBasePath = ConfigPath + "Empathic\\FirstCit\\";
            dbname = "Bank";
            strconn = "";


            try
            {
                string repname = dataBasePath + "Reports\\Dropoff" + myDate.ToString("yyyyMMdd") + ".xls";

                DateTime enddate = myDate.AddDays(-myDate.Day);
                DateTime startdate = enddate.AddDays(1).AddMonths(-1);
                MyWriteExcel exl = new MyWriteExcel(repname, dataBasePath + "Reports\\Templates\\DropoffTemp.xls");

                //dbname = dbname + myDate.ToString("yyMM");
                //WriteMonth(ref exl, startdate, enddate, "B");

                enddate = startdate.AddDays(-1);
                //startdate = startdate.AddMonths(-1);
                dbname = "Bank";
                dbname = dbname + myDate.AddMonths(-1).ToString("yyMM");
                WriteMonth(ref exl, startdate, enddate, "C");

                enddate = startdate.AddDays(-1);
                startdate = startdate.AddMonths(-2);
                dbname = "Bank";
                dbname = dbname + myDate.AddMonths(-2).ToString("yyMM");
                WriteMonth(ref exl, startdate, enddate, "D");

                exl.Save();
                exl.Close();

                MyEmail email = new MyEmail("", "First Citizens Bank Dropoff Report", "Please see attached report");
                email.AddAttachment(repname);
                email.AddBCC(CommonEmail);
                email.sendEmail();

                endProgram();
            }
            catch (Exception e)
            {
                WriteToLog("@Failed: " + e.ToString());

                HelpPage(e.ToString(), "Failed");
            }

        }

        public static void WriteMonth(ref MyWriteExcel exl, DateTime startdate, DateTime enddate, string column)
        {
            string sql = "select count(*) as total, sum(iif(mid(CALLSTATUS, 1, 2) >= '06', 1, 0)) as entered, sum(iif(DONE is not null, 1, 0)) as completed"
                    + " from " + dbname + " where startdate >= " + startdate.ToString("yyyyMMdd") + " and startdate <= " + enddate.AddMonths(+1).ToString("yyyyMMdd")
                    + " and stopdate is not null";
            OdbcConnection conn = new OdbcConnection(strconn);
            conn.Open();
            OdbcCommand cmd = new OdbcCommand(sql, conn);
            OdbcDataReader dr = cmd.ExecuteReader();

            dr.Read();

            int total;
            int entered;
            int completed;
            int abandoned;

            if (!(int.TryParse(dr["total"].ToString(), out total) && int.TryParse(dr["entered"].ToString(), out entered) && int.TryParse(dr["completed"].ToString(), out completed)))
            {
                Exception myex = new Exception("Failed to convert one of the counts to an integer");
                throw myex;
            }
            dr.Close();
            dr.Dispose();

            abandoned = entered - completed;


            sql = "select avg(duration) as avgdur from " + dbname + myDate.AddMonths(-1).ToString("yyMM") + " where startdate >= " + startdate.ToString("yyyyMMdd") + " and startdate <= " + enddate.AddMonths(+1).ToString("yyyyMMdd")
                + " and stopdate is not null and DONE is not null";
            cmd.CommandText = sql;
            dr = cmd.ExecuteReader();
            dr.Read();
            double avgcompleted;
            if (!double.TryParse(dr["avgdur"].ToString(), out avgcompleted))
            {
                Exception myex = new Exception("Failed to convert one of the average duration to a double");
                throw myex;
            }
            dr.Close();
            dr.Dispose();

            sql = "select avg(duration) as avgdur from " + dbname + " where startdate >= " + startdate.ToString("yyyyMMdd") + " and startdate <= " + enddate.AddMonths(+1).ToString("yyyyMMdd")
                + " and stopdate is not null and DONE is null";
            cmd.CommandText = sql;
            dr = cmd.ExecuteReader();
            dr.Read();
            double avgdrop;
            if (!double.TryParse(dr["avgdur"].ToString(), out avgdrop))
            {
                Exception myex = new Exception("Failed to convert one of the average duration to a double");
                throw myex;
            }
            dr.Close();
            dr.Dispose();

            sql = "select callstatus, count(*) as num from " + dbname + " where startdate >= " + startdate.ToString("yyyyMMdd") + " and startdate <= " + enddate.AddMonths(+1).ToString("yyyyMMdd")
                + " and stopdate is not null group by callstatus";
            cmd.CommandText = sql;
            dr = cmd.ExecuteReader();

            int linenum = 3;
            exl.WriteCell(column + linenum.ToString() + ":" + column + linenum.ToString(), total);

            linenum++;
            exl.WriteCell(column + linenum.ToString() + ":" + column + linenum.ToString(), entered);

            linenum++;
            exl.WriteCell(column + linenum.ToString() + ":" + column + linenum.ToString(), completed);

            linenum++;
            exl.WriteCell(column + linenum.ToString() + ":" + column + linenum.ToString(), abandoned);

            int minutes = ((int)Math.Round(avgcompleted, 0) / 60);
            int seconds = ((int)Math.Round(avgcompleted, 0) % 60);
            string line = minutes.ToString() + ":" + seconds.ToString();
            linenum++;
            exl.WriteCell(column + linenum.ToString() + ":" + column + linenum.ToString(), line);

            minutes = ((int)Math.Round(avgdrop, 0) / 60);
            seconds = ((int)Math.Round(avgdrop, 0) % 60);
            line = minutes.ToString() + ":" + seconds.ToString();
            linenum++;
            exl.WriteCell(column + linenum.ToString() + ":" + column + linenum.ToString(), line);

            object[] zerofill = { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 };
            exl.WriteRange(column + "11:" + column + "38", zerofill);
            while (dr.Read())
            {
                if (dr["callstatus"].ToString() == "00_SurveyInt")
                    linenum = 11;
                if (dr["callstatus"].ToString() == "01_SurveyCode")
                    linenum = 12;
                if (dr["callstatus"].ToString() == "02_Visit_Date")
                    linenum = 13;
                if (dr["callstatus"].ToString() == "03_Visit_Time")
                    linenum = 14;
                if (dr["callstatus"].ToString() == "04_Purpose_Visit")
                    linenum = 15;
                if (dr["callstatus"].ToString() == "06.1_First_Impres")
                    linenum = 16;
                if (dr["callstatus"].ToString() == "06.2_OV_SatB")
                    linenum = 17;
                if (dr["callstatus"].ToString() == "06.3_OV_RecB")
                    linenum = 18;
                if (dr["callstatus"].ToString() == "06.4_OV_Value")
                    linenum = 19;
                if (dr["callstatus"].ToString() == "06.5_Trans_Time")
                    linenum = 20;
                if (dr["callstatus"].ToString() == "06.5Service")
                    linenum = 21;
                if (dr["callstatus"].ToString() == "06.6_Employee_Pro")
                    linenum = 22;
                if (dr["callstatus"].ToString() == "06.7_Employee_Acc")
                    linenum = 23;
                if (dr["callstatus"].ToString() == "06.8_Employee_Thank")
                    linenum = 24;
                if (dr["callstatus"].ToString() == "06.9_Employee_Sat")
                    linenum = 25;
                if (dr["callstatus"].ToString() == "06.9.1_Employee_WOW")
                    linenum = 26;
                if (dr["callstatus"].ToString() == "06.9.2_Demographics")
                    linenum = 27;
                if (dr["callstatus"].ToString() == "06.9.3_Gender")
                    linenum = 28;
                if (dr["callstatus"].ToString() == "06.9.4_Age")
                    linenum = 29;
                if (dr["callstatus"].ToString() == "07_Draw")
                    linenum = 30;
                if (dr["callstatus"].ToString() == "13_Phone")
                    linenum = 31;
                if (dr["callstatus"].ToString() == "12_Rules")
                    linenum = 32;
                if (dr["callstatus"].ToString() == "11_ContestRules")
                    linenum = 33;
                if (dr["callstatus"].ToString() == "08_Exit_System")
                    linenum = 34;
                if (dr["callstatus"].ToString() == "10_Kicked")
                    linenum = 35;
                if (dr["callstatus"].ToString() == "Repeat")
                    linenum = 36;
                if (dr["callstatus"].ToString() == "Start")
                    linenum = 37;
                if (dr["callstatus"].ToString() == "06_Instruc_1")
                    linenum = 38;

                    exl.WriteCell(column + linenum.ToString() + ":" + column + linenum.ToString(), dr["num"]);
                }
            }
        }
    }

Here are my expected results
From the first DB
00_SurveyInt 172
01_SurveyCode 641
02_Visit_Date 146
03_Visit_Time 18
04_Purpose_Visit 7
06.1_First_Impres 6
06.2_OV_SatB 64
06.3_OV_RecB 10
06.4_OV_Value 5
06.5Service 2
06.5_Trans_Time 5
06.6_Employee_Pro 14
06.7_Employee_Acc 10
06.8_Employee_Thank 2
06.9.1_Employee_WOW 5
06.9.3_Gender 4
06.9.4_Age 4
06.9_Employee_Sat 3
06_Instruc_1 4
07_Draw 4
08_Exit_System 1360
10_Kick 9
11_ContestRules 3
12_Rules 14
13_Phone 31
Repeat 1
Start 21

and these are the results the process is returning
Survey Intro 172
Survey Entry Code 641
Visit_Date 146
Visit_Time 18
Purpose_Visit 7
First_Impres 6
OV_SatBranch 64
OV_RecBranch 10
OV_Value 5
Trans_Time 5
Service 2
Employee_Pro 14
Employee_Acc 10
Employee_Thank 2
Employee_Sat 3
Employee_WOW 5
Demographics 0
Gender 4
Age 4
Draw 4
Phone 31
Rules 14
Contest Rules 3
Exit System 9
Kicked Out 0
Repeat 1
Start 21
Instructions 4

I cant figure out why these arent matching up if someone could help me identify the problem please.

modified on Thursday, July 23, 2009 1:43 PM

Re: if someone could help me identify the problem please.

Nagy Vilmos23-Jul-09 7:27

Nagy Vilmos

23-Jul-09 7:27

whwen comparing two strings, you should use the

s1.Equals(s2)

. The code s1 == s2 just returns true if they are the same object not the same value.

Panic, Chaos, Destruction.
My work here is done.

Re: if someone could help me identify the problem please.

PIEBALDconsult23-Jul-09 7:30

PIEBALDconsult

23-Jul-09 7:30

Where does it say that? Do you have proof?

Why do people still believe this? WTF | :WTF:

P.S. See: http://msdn.microsoft.com/en-us/library/system.string.op_equality(VS.71).aspx[^]

"
This operator is implemented using the Equals method, which means the comparands are tested for a combination of reference and value equality. The comparison is case-sensitive.
"

Therefore == == Equals !

Re: if someone could help me identify the problem please.

Nagy Vilmos23-Jul-09 7:46

Nagy Vilmos

23-Jul-09 7:46

I was sure that it was the case. I have just chickened and according to Troelsen, == and .equals both compare content. Blush | :O

I think it's wrong, but going by what Luc says below it makes some sort of sense. I have java as well as C#, there it is absolutly == comnpares references and .equals() compares values.

Panic, Chaos, Destruction.
My work here is done.

Re: if someone could help me identify the problem please.

PIEBALDconsult23-Jul-09 7:48

PIEBALDconsult

23-Jul-09 7:48

Well .net is better than Java. (duh!) Big Grin | :-D

Re: if someone could help me identify the problem please.

LetMeFinclOut23-Jul-09 12:15

LetMeFinclOut

23-Jul-09 12:15

PIEBALDconsult wrote:
Therefore == == Equals !

Re: if someone could help me identify the problem please. [modified]

Luc Pattyn23-Jul-09 7:33

Luc Pattyn

23-Jul-09 7:33

Aren't all strings "interned" in .NET, i.e. two strings holding the same value actually point to a single instance?

[EDIT] No, they are not (see this little article[^]). However, string1==string2 and string.Equals(string1,string2) both call the string.Equals method and generate the correct result no matter what. [/EDIT]

Smile | :)

Luc Pattyn [Forum Guidelines] [My Articles]

The quality and detail of your question reflects on the effectiveness of the help you are likely to get.
Show formatted code inside PRE tags, and give clear symptoms when describing a problem.

modified on Friday, September 4, 2009 1:02 PM

Use Ctrl+Left/Right to switch messages, Ctrl+Up/Down to switch threads, Ctrl+Shift+Left/Right to switch pages.