|
Yeah, i didn't think it would be a problem, since i tested it with a console app, and it seemed fine. Alas.
Of course, if it crashed at setting the length of the progress bar, how did it send the first part of the file 
It will forever be a mistery.
|
|
|
|
|
I'm porting a game I made for C++ into C# and I can't find an equivalent of getch(). I found the "Keys" object but it's not quite what I want (or maybe I'm not using it right). Basically what my game does is that it waits for the user to press a key (primarily the directional keys) and acts based on the key pressed.
[Edit]
I forgot to mention this isn't a console app it's a Windows App.
|
|
|
|
|
ReadKey from the .NET 2.0 framework should be what you are looking for. You can also test for Keys.Left, Keys.Right etc.
regards
modified 12-Sep-18 21:01pm.
|
|
|
|
|
I couldn't find any Readkey when I typed in "Read". I tried using Keys.Left and so on but that class doesn't wait until you pressed a key which I need it to do. Alls it does is if a key is pressed return it otherwise return "None" and continue on.
But Thanks.
|
|
|
|
|
Console.ReadKey(true).KeyChar
David Anton
http://www.tangiblesoftwaresolutions.com
Instant C#: VB to C# converter
Instant VB: C# to VB converter
C++ to C# Converter: converts C++ to C#
C++ to VB Converter: converts C++ to VB
C++ to Java Converter: converts C++ to Java
Instant C++: converts C# to C++/CLI and VB to C++/CLI
|
|
|
|
|
So that'll work even though I'm not using a console window? (Just making sure)
|
|
|
|
|
You would have to use a console window in C# to do the equivalent of getch() in C++.
David Anton
http://www.tangiblesoftwaresolutions.com
Instant C#: VB to C# converter
Instant VB: C# to VB converter
C++ to C# Converter: converts C++ to C#
C++ to VB Converter: converts C++ to VB
C++ to Java Converter: converts C++ to Java
Instant C++: converts C# to C++/CLI and VB to C++/CLI
|
|
|
|
|
Yeah so my question is is there a way for the Windows App to wait until a key is pressed then return the key pressed?
|
|
|
|
|
Just respond to a KeyPress even - the application is already waiting for all kinds of input, and it would love to tell you if only you would listen. Basically, set the KeyPreview property of your main form to True, and then response to the KeyDown even from that form.
private void Form1_KeyDown(object sender, KeyEventArgs e)
{
if ((e.KeyCode == Keys.Left) || (e.KeyCode == Keys.Right))
}
I do not believe they are right who say that the defects of famous men should be ignored. I think it is better that we should know them. Then, though we are conscious of having faults as glaring as theirs, we can believe that that is no hindrance to our achieving also something of their virtues. - W. Somerset Maugham
My New Blog
|
|
|
|
|
I tried that (I put a MessageBox.Show("") in the if statement and it never popped up. I moved it out of the if and it still didn't show up. I set the KeyPreview to true.
|
|
|
|
|
I would like to get an object from one of the following known values:
1. Window Handle
2. Process Id
3. Associated Threads
Conversely, I could get one of the above values from an object and be able to perform my operation that way. Currently, I can create a new MS Word instance, and I can get all of the open MS Word applications into data objects, but I cannot tell which one is the one that I created. Does anyone know a way to do this? Thanks,
Jeff
|
|
|
|
|
Hi Jeff,
when you start a process with Process.Start() I expect Process.Id to contain the PID.
Does that help?
Luc Pattyn [Forum Guidelines] [My Articles]
this weeks tips:
- make Visual display line numbers: Tools/Options/TextEditor/...
- show exceptions with ToString() to see all information
- before you ask a question here, search CodeProject, then Google
|
|
|
|
|
I am essentially attempting to ensure that my Microsoft.Office.Interop.Word.Application object corresponds to the new instance of MS Word that I just created. Yes, process has information such as process Id, process start time, window handle, etc., but the Word.Application object has none of those things in itself or any child elements (as far as I can tell). I was wondering if there is some way that I can test to see if the object that I am obtaining from the call to Marshal.GetActiveObject("Word.Application") is in fact the one that I created. There are certain tests that I am doing to ensure that I did get the proper one, such as ensuring that Word.Application.(Visible, Width, Height, X, Y) match the values that I set them to on the window with WinAPI calls, but there has to be a cleaner way to do this. Any additional info would be appreciated. Thanks,
Jeff
|
|
|
|
|
Sorry Jeff, I have no prior experience with Microsoft.Office.Interop.Word.Application
Luc Pattyn [Forum Guidelines] [My Articles]
this weeks tips:
- make Visual display line numbers: Tools/Options/TextEditor/...
- show exceptions with ToString() to see all information
- before you ask a question here, search CodeProject, then Google
|
|
|
|
|
As one of my side projects I've been shuffling through the Adobe PDF 1.8 documentation, thinking about how to whip up a useful (if not entirely complete) library to print to PDF. PostScript takes a little bit to get used to but it's not bad.
My latest milestone was finding a way to retrieve a font from the system and it into the output stream (as PDF features embedded fonts). Now most of the major commercial vendors implement partial font embedding (i.e. only embedding the characters that you've used in your PDF document, rather than the entire font). I think this would be a useful addition to my homebrew library, but MSDN and Google are a bit light on documentation on the Font object.
So I suppose my question to you fine fellow programmers is, is there a way to take a .NET framework (2.0) Font object, remove all but a defined set of characters, and then write the remaining bits to a MemoryStream or FileStream? Would I have to do this unmanaged? Would I have to be so desperate as to break the font apart at the byte level in C++ and manually copy the relevant glyph data to the stream?
Please don't bother me... I'm hacking right now. Don't look at me like that - doesn't anybody remember what "hacking" really means? 
|
|
|
|
|
Hello everybody
I have a txtbox where i write the name of my customrs in, the customer might be old and might be new
so the old one have an id and the name is in the database
what i want to do is when i begin write the name of the customer directly the nearst word appear in the txtbox
Ex:
in the database i have the name John
when i write the name to my customer Jony
when i press J whole the word John appear and ohn will be selected
when i press o also the word John still in the textbox but just hn is selected
when i press n the hn disappear and just still in the database Jon where i should continue the name myself because there no one similar in the database
Thank a lot
Assaf
|
|
|
|
|
All you need to is to use regular expressions or wild cards and pass the typed character to the reglar expression that searchs records in the database and your query returns the search criteria
LIKE %John% will search simliar names with John or Jane
|
|
|
|
|
Can I have an example or where i should search for, Please
Thanks for your help
Assaf
|
|
|
|
|
If this is a web app, search here and google for AutoCompleteExtender.
If it is a WinForm, which I don't know, but you should be able to catch the KeyUp / KeyDown / KeyPress event (which ever is suitable), retrieve the text entered by the user from the textbox, perform your search and populate the textbox with the relevant result.
"More functions should disregard input values and just return 12. It would make life easier." - comment posted on WTF
"I haven't spoken to my wife now for 48 hours. I don't like to interrupt her.
|
|
|
|
|
Hi guys,
I created a datagridview to view and add/upadate/delete data from sqlserver...bud it does add everything without checking whether the data exist in the database or not...how can i do this check?
|
|
|
|
|
Are you writing SP to update the data? you can check
select count(*) from db where <condition> and check if it already exists.
Are you trying to update the entire gridview data at once? Can you send the code?
|
|
|
|
|
Djavid j wrote: I created a datagridview to view and add/upadate/delete data from sqlserver...bud it does add everything without checking whether the data exist in the database or not...how can i do this check?
May, Optimistic Concurrency[^] rescue you. If so, also take a look at this[^]
________________________________
Success is not something to wait for, its something to work for.
|
|
|
|
|
there is an application with .sln only. I need to have the project file, .csproj also. How can I do this?
|
|
|
|
|
Open the solution in Visual Studio, create a new csproj file via Add->New Project, then add your source files to that project.
|
|
|
|
|
I opened in vs and tried to add new project, but visual C# shows only windows and office types, how can I add a web app as the project?
I created the web app sln by going through File->New Website because file->project does not show web application at all.
Please help
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
