|
Well -2147463156 == 0x8000500C == E_ADS_CANT_CONVERT_DATATYPE (Generic ADSI Error Codes[^])
So there's something in the var that can't be converted.
Have you tried calling VariantInit(&var) before calling ADsBuildVarArrayStr[^]?
IADs::PutEx[^]
If your actions inspire others to dream more, learn more, do more and become more, you are a leader." - John Quincy Adams
You must accept one of two basic premises: Either we are alone in the universe, or we are not alone in the universe. And either way, the implications are staggering” - Wernher von Braun
|
|
|
|
|
Yes Sir.
I'm convinced that I have a safe array. it works on many other keys just fine. It's just the MimeMap Key, I really need to figure out how to decode the HRESULT numbers.
-2147463160, -2147463156
I give up. Going to put this on my ELance list and farm it out next week.
Thanks for the help, I got most of it written myself.
|
|
|
|
|
I am at a loss and I am hoping someone can lead me down the right path. I have a COM dll that is written in C++. If a user is on Windows7 (or higher), the user will have the option of invoking this new functionality. Otherwise, it will not be available. The problem is that this new functionality uses specific libraries that are only available with Windows7. I didn't think it was a problem until I went to register the DLL on a XP box, where the registration fails. I am certain it is because of these libraries (which are in the project settings). Is there any way to make the DLLS conditional? I have been looking for some different methods but I haven't located anything.
|
|
|
|
|
You can try using the "delay load" functionality of the linker for the dependent Win7 DLLs.
If that doesn't work, you will need to LoadLibrary()[^] them, and use GetProcAddress()[^]
If your actions inspire others to dream more, learn more, do more and become more, you are a leader." - John Quincy Adams
You must accept one of two basic premises: Either we are alone in the universe, or we are not alone in the universe. And either way, the implications are staggering” - Wernher von Braun
|
|
|
|
|
Ah, loadlibrary, it never even occurred to me. I have used it for DLLs but I have never tried it for libraries. I will give that a try.
|
|
|
|
|
If these are static libraries (.LIBs) you're linking to that refer to win7 dlls, then you'll need to put the code that refers to those static libraries into a DLL and then LoadLibrary() those.
Also you could detect the OS, and only LoadLibrary() when on Win7 or greater.
If your actions inspire others to dream more, learn more, do more and become more, you are a leader." - John Quincy Adams
You must accept one of two basic premises: Either we are alone in the universe, or we are not alone in the universe. And either way, the implications are staggering” - Wernher von Braun
|
|
|
|
|
Hi,
When you compile your COM library you need to #define the appropriate WINVER, _WIN32_WINNT and _WIN32_IE. By setting these values the windows headers will #include or exclude specific functions/libraries. You may receive some compilation errors after setting these values. Do not panic... you will need to use LoadLibrary/GetProcAddress at runtime to determine if the functions are available. Some Win7 features may not be available on WinXP so you may need to re-implement some portions of your application for backwards compatibility.
Using the Windows Headers[^]
Best Wishes,
-David Delaune
|
|
|
|
|
I'm using ShellExecuteEX just to get started with my project, and I'm sure there will be offers of a better way to complete the task. My post yesterday was to build the parameter string for ShellExecuteEX, in which I run the Pkgmgr.exe program
There are 2 ways to run the program
1. pkgmgr.exe /iu:myparameters - starts program, but quickly releases shell once program starts.
2. Start /w pkgmgr.exe /iu:myparamters - starts program, does not release shell until it's complete.
I want the second method, so my program waits until the shell completes, but ShellExecuteEx actually checks for the existence of the program file as a pre-flight check.
I was also wondering if there is a way to attach a window of something to so progress.
lp_Operation = "open";
lp_File = "pkgmgr.exe";
lp_Directory = msi_DIR_AppVolumeFolder_II;
lp_Parameters = caWin._create_IIS_Pkgmgr_Install_Parameters();
SHELLEXECUTEINFO lpExecInfo;
lpExecInfo.cbSize = sizeof(SHELLEXECUTEINFO);
lpExecInfo.lpFile = lp_File;
lpExecInfo.fMask = SEE_MASK_DOENVSUBST|SEE_MASK_NOCLOSEPROCESS ;
lpExecInfo.hwnd = NULL;
lpExecInfo.lpVerb = lp_Operation;
lpExecInfo.lpParameters = lp_Parameters;
lpExecInfo.lpDirectory = lp_Directory;
lpExecInfo.nShow = SW_SHOW ;
lpExecInfo.hInstApp = (HINSTANCE) SE_ERR_DDEFAIL ;
exit_Code = ShellExecuteEx(&lpExecInfo);
if(lpExecInfo.hProcess !=NULL) {
::WaitForSingleObject(lpExecInfo.hProcess, INFINITE);
::CloseHandle(lpExecInfo.hProcess);
}
|
|
|
|
|
CMD [/A | /U] [/Q] [/D] [/E:ON | /E:OFF] [/F:ON | /F:OFF] [/V:ON | /V:OFF]
[[/S] [/C | /K] string]
/C Carries out the command specified by string and then terminates
/K Carries out the command specified by string but remains
/S Modifies the treatment of string after /C or /K (see below)
/Q Turns echo off
/D Disable execution of AutoRun commands from registry (see below)
/A Causes the output of internal commands to a pipe or file to be ANSI
/U Causes the output of internal commands to a pipe or file to be
Unicode
/T:fg Sets the foreground/background colors (see COLOR /? for more info)
/E:ON Enable command extensions (see below)
/E:OFF Disable command extensions (see below)
/F:ON Enable file and directory name completion characters (see below)
/F:OFF Disable file and directory name completion characters (see below)
/V:ON Enable delayed environment variable expansion using ! as the
delimiter. For example, /V:ON would allow !var! to expand the
variable var at execution time. The var syntax expands variables
at input time, which is quite a different thing when inside of a FOR
loop.
/V:OFF Disable delayed environment expansion.
So, do the following:
lp_File = "cmd.exe"
lp_Parameters = CString("/k pkgmgr.exe ") + lp_Parameters;
This will start a command prompt and then run the pkgmgr.exe program.
To get the full help on cmd, start a command prompt (this *is* cmd.exe) and type cmd /?
If your actions inspire others to dream more, learn more, do more and become more, you are a leader." - John Quincy Adams
You must accept one of two basic premises: Either we are alone in the universe, or we are not alone in the universe. And either way, the implications are staggering” - Wernher von Braun
|
|
|
|
|
Good idea, didn't think of that.
What about the Start /w pkgmgr.exe to satisfy the pkgmgr?
or /k Start /w pkgmgr.exe /iu:
Let me try them all out first and see what happens
Thanks, be back in an hour
|
|
|
|
|
I didn't like the cmd window hanging there with a blinking cursor, Although it did the job.
I added the CoIntialize to the Shell Execute, and it grabs the process, and doesn't let go until the pkgmgr.exe completes now. Before it just came back after the program started running. Now I just need to add the exitCode stuff in case it fails for some reason, and check the errorlevel code at the end.
I'm going to leave it at this for now.
SHELLEXECUTEINFO lpExecInfo = {0};
lpExecInfo.cbSize = sizeof(SHELLEXECUTEINFO);
lpExecInfo.lpFile = lp_File;
lpExecInfo.fMask = SEE_MASK_DOENVSUBST|SEE_MASK_NOCLOSEPROCESS ;
lpExecInfo.hwnd = NULL;
lpExecInfo.lpVerb = lp_Operation;
lpExecInfo.lpParameters = lp_Parameters;
lpExecInfo.lpDirectory = lp_Directory;
lpExecInfo.nShow = SW_SHOW ;
lpExecInfo.hInstApp = (HINSTANCE) SE_ERR_DDEFAIL ;
hr = CoInitializeEx(NULL, COINIT_APARTMENTTHREADED | COINIT_DISABLE_OLE1DDE);
if ( FAILED( hr ) ) {
CoUninitialize();
hr = CoInitializeEx( NULL, COINIT_MULTITHREADED );
if ( FAILED( hr ) ) {
wprintf( L"CoInitialize failed. Error 0x%0x\n", hr );
goto comError;
}
}
exit_Code = ShellExecuteEx(&lpExecInfo);
if(lpExecInfo.hProcess !=NULL) {
::WaitForSingleObject(lpExecInfo.hProcess, INFINITE);
::CloseHandle(lpExecInfo.hProcess);
}
comError:
CoUninitialize();
|
|
|
|
|
you can use cmd /c instead of cmd /k and then the command window will disappear once pkgmgr.exe completes.
If your actions inspire others to dream more, learn more, do more and become more, you are a leader." - John Quincy Adams
You must accept one of two basic premises: Either we are alone in the universe, or we are not alone in the universe. And either way, the implications are staggering” - Wernher von Braun
|
|
|
|
|
I have a C program and here I invoke the Weka software how can I do? I thank you all for your help!
|
|
|
|
|
|
what I want to do and a C program to invoke the software Weka. I can do this if you like? eg with the previous answer but I would like to understand how to go about my problem! thanks to all
|
|
|
|
|
Did you bother to follow the links provided by Madhu? They clearly demonstrate how to solve your problem.
"One man's wage rise is another man's price increase." - Harold Wilson
"Fireproof doesn't mean the fire will never come. It means when the fire comes that you will be able to withstand it." - Michael Simmons
"Some people are making such thorough preparation for rainy days that they aren't enjoying today's sunshine." - William Feather
|
|
|
|
|
I'm still amazed by some of the laziness shown by some site users... 
|
|
|
|
|
hi!
how do i get counter of item (index of item in CTreeCtrl) with its HTREEITEM ?
for example: user selects 3th item of CTreeCtrl. in code, with GetSelectedItem() function we have HTREEITEM of item. but index of it?(in this example 3)
please help me...
Zo.Naderi-Iran
|
|
|
|
|
The index based on what? What would be index 0?
> The problem with computers is that they do what you tell them to do and not what you want them to do. <
> If it doesn't matter, it's antimatter.<
|
|
|
|
|
The index concept is not applicable for a TreeItem. The HTREEITEM itself is an index identifier for the item.
Loop through each items and store the index values and HTREEITEM in a map for future use.
zon_cpp wrote: user selects 3th item of CTreeCtrl.
If your issue is to get the exact item when the user clicks on a treeitem - I have a suggestion, to use CTreeCtrl's HitTest[^] to get the item from selected point.
|
|
|
|
|
when user click on item of Tree view. for example 3th item: how do i get (3) numeral index this item?
Zo.Naderi-Iran
|
|
|
|
|
You don't. A Tree does not have or use an index. Even if it had, the moment an item gets removed or added, any stored index values would all be invalidated - so you cannot store an index and hope to later retrieve the correct item through that index, because it might no longer be valid!
The HTREEITEM value you get is what is generally called a 'handle'. It serves as a reference to the actual item, and it will remain valid until this child item is removed from the tree. You should use that handle and retrieve the child item, using HTREEITEM GetChildItem(HTREEITEM hItem) const; (see http://msdn.microsoft.com/en-US/library/yk3ystd6%28v=VS.80%29.aspx[^]).
|
|
|
|
|
Why you need the actual "position" (I assume that's what you want) ?
Assuming you want the position in regards with the parent node
parent
- node1
- node2
- node3
- node4
Anyway, a suggestion :
CTreeCtrl::GetParent of selected node and then use CTreeCtrl::GetChildItem and CTreeCtrl::GetNextSiblingItem(or other similar member) in a loop to get the next item; just count.
Watched code never compiles.
|
|
|
|
|
Good idea, and it actually answers the question - but I wonder whether that's what he (or she) actually needs 
|
|
|
|
|
Wouldn't calling GetPrevSiblingItem[^] to walk "upwards" until it returns no more items and counting that work?
> The problem with computers is that they do what you tell them to do and not what you want them to do. <
> If it doesn't matter, it's antimatter.<
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
