Mobile

startupServer(int slaveAddr,  const TCHAR * const hostName)
{

   int result;
   int tcpOption;
   struct sockaddr_in hostAddress;

   if (isStarted())
      return (FTALK_ILLEGAL_STATE_ERROR);

   // Note: For TCP we allow 0 as slave address, -1 means ignore slave adr
   if ((slaveAddr < -1) || (slaveAddr > 255))
      return (FTALK_ILLEGAL_ARGUMENT_ERROR);
   this->slaveAddr = slaveAddr;

   //
   // Special treatment for the Win32 platform, needs to load WinSock DLL
   //
#ifdef _WINSOCKAPI_
   WSADATA wsaData;

   result = WSAStartup(0x0101, &wsaData);
   if (result != 0)
      return (FTALK_SOCKET_LIB_ERROR);
#endif

   //
   // Open socket
   //
   listenSocket = socket(PF_INET, SOCK_STREAM, 0);
   if (listenSocket == INVALID_SOCKET)
   {
      shutdownServer();
      return (FTALK_OPEN_ERR);
   }

   //
   // Configure listen socket options (we ignore errors here)
   //
#ifdef SO_REUSEADDR
   tcpOption = 1; // Enable option
   setsockopt(listenSocket, SOL_SOCKET, SO_REUSEADDR,
              (char *) &tcpOption, sizeof (tcpOption));
#endif

   //
   // Binding the listen socket to the port
   //
   hostAddress.sin_family = AF_INET;
   if ((hostName == NULL) || (hostName[0] == '\0'))
      hostAddress.sin_addr.s_addr = htonl(INADDR_ANY);
   else
   {
      hostAddress.sin_addr.s_addr = inet_addr((char *) hostName);
#if !defined(__VXWORKS__) // We don't support host name resolving with VxWorks
      if (hostAddress.sin_addr.s_addr == INADDR_NONE)
      {
         struct hostent *hostInfo;

         hostInfo = gethostbyname((char *) hostName);

         if (hostInfo == NULL)
            return (FTALK_TCPIP_CONNECT_ERR);
         hostAddress.sin_addr = *(struct in_addr *) hostInfo->h_addr;
      }
#endif
   }
   hostAddress.sin_port = htons(portNo);
   result = bind(listenSocket, (struct sockaddr *) &hostAddress,
                 sizeof (hostAddress));
   if (result == SOCKET_ERROR)
   {
      shutdownServer();
      switch (socketErrno)
      {
#ifdef _WINSOCKAPI_
         case WSAEACCES:
         return (FTALK_PORT_NO_ACCESS);
         case WSAEADDRINUSE:
         return (FTALK_PORT_ALREADY_BOUND);
         case WSAEADDRNOTAVAIL:
         default:
         return (FTALK_PORT_NOT_AVAIL);
#else
         case ENOTCONN: // Linux 7.2 reports this error no if no root privilege
         case EACCES:
         return (FTALK_PORT_NO_ACCESS);
         case EADDRINUSE:
         return (FTALK_PORT_ALREADY_BOUND);
         case EADDRNOTAVAIL:
         default:
         return (FTALK_PORT_NOT_AVAIL);
#endif
      }
   }

   //
   // Start listening to incoming connections
   //
   result = listen(listenSocket,
               ((MAX_CONNECTIONS < SOMAXCONN) ? MAX_CONNECTIONS : SOMAXCONN));
   if (result == SOCKET_ERROR)
   {
      shutdownServer();
      return (FTALK_LISTEN_FAILED);
   }
   return (FTALK_SUCCESS);
}

serverLoop()
{
   int iReturnCode = (FTALK_SUCCESS);
   int result;
   int sockIdx;
   int recvResult;
   int sendResult;
   fd_set fdSet;
   timeval timeVal;
   SOCKET maxFileDes;
   int replyCnt;
   int tcpOption;

   if (!isStarted())
      return (FTALK_ILLEGAL_STATE_ERROR);

   //
   // Prepare file descriptor set for select call
   //
   FD_ZERO (&fdSet);
#ifdef _MSC_VER
#  pragma warning(push)
#  pragma warning(disable: 4127)
#endif
   FD_SET (listenSocket, &fdSet);
#ifdef _MSC_VER
#  pragma warning(pop)
#endif
   maxFileDes = listenSocket;
   for (sockIdx = 0; sockIdx < MAX_CONNECTIONS; sockIdx++)
   {
      if (connectionSocketArr[sockIdx] != INVALID_SOCKET)
#ifdef _MSC_VER
#  pragma warning(push)
#  pragma warning(disable: 4127)
#endif
         FD_SET (connectionSocketArr[sockIdx], &fdSet);
#ifdef _MSC_VER
#  pragma warning(pop)
#endif
      if (connectionSocketArr[sockIdx] > maxFileDes)
         maxFileDes = connectionSocketArr[sockIdx];
   }

   //
   // Block until accept request or received data or time-out
   //
   timeVal.tv_sec = (long) timeOut / 1000L;
   timeVal.tv_usec = ((long) timeOut % 1000L) * 1000L;
   if (timeOut == 0)
      result = select((int) maxFileDes + 1, &fdSet, NULL, NULL, NULL);
   else
      result = select((int) maxFileDes + 1, &fdSet, NULL, NULL, &timeVal);
   if (result == SOCKET_ERROR)
      return (FTALK_FILEDES_EXCEEDED);

   //
   // Check for time-out
   //
   if (result == 0)
   {
      TRACELOG1("Slave poll time-out!\n");
      dataTablePtr->timeOutHandler();

      iReturnCode = (FTALK_REPLY_TIMEOUT_ERROR);
   }

   //
   // Connection accept request
   //
   if (FD_ISSET (listenSocket, &fdSet))
   {
      // Search a free socket
      for (sockIdx = 0; sockIdx < MAX_CONNECTIONS; sockIdx++)
      {
         if (connectionSocketArr[sockIdx] == INVALID_SOCKET)
         {
            struct sockaddr_in peerAddr;
            SOCK_LEN_TYPE peerAddrLen = sizeof(peerAddr);

            // Yes, socket is free, try to accept a connection on it
            connectionSocketArr[sockIdx] = accept(listenSocket,
                                                  (struct sockaddr *) &peerAddr,
                                                  &peerAddrLen);
            if (connectionSocketArr[sockIdx] != INVALID_SOCKET)
            {
               //
               // Check id connection shall be accepted
               //
               if (!dataTablePtr->validateMasterIpAddr(inet_ntoa(peerAddr.sin_addr)))
               {
                  shutdown(connectionSocketArr[sockIdx], SD_BOTH);
                  closesocket(connectionSocketArr[sockIdx]);
                  connectionSocketArr[sockIdx] = INVALID_SOCKET;
                  TRACELOG2("Connection rejected on slot %d\n", sockIdx);
               }

               //
               // Set socket options (we ignore errors here, not critical)
               //
#ifdef TCP_NODELAY
               tcpOption = 1; // Enable option
               setsockopt(connectionSocketArr[sockIdx],
                          IPPROTO_TCP, TCP_NODELAY,
                          (char *) &tcpOption, sizeof (tcpOption));
#endif
#ifdef SO_SNDBUF
               tcpOption = MAX_MSG_SIZE;
               setsockopt(connectionSocketArr[sockIdx],
                          SOL_SOCKET, SO_SNDBUF,
                          (char *) &tcpOption, sizeof (tcpOption));
#endif
#ifdef SO_RCVBUF
               tcpOption = MAX_MSG_SIZE;
               setsockopt(connectionSocketArr[sockIdx],
                          SOL_SOCKET, SO_RCVBUF,
                          (char *) &tcpOption, sizeof (tcpOption));
#endif
#ifdef SO_LINGER
               tcpOption = 0; // Disable option = discard unsent data when closing
               setsockopt(connectionSocketArr[sockIdx],
                          SOL_SOCKET, SO_LINGER,
                          (char *) &tcpOption, sizeof (tcpOption));
#endif
               TRACELOG2("Connection accepted on slot %d\n", sockIdx);
            }
            break; // Leave for loop
         }
      }
   }

   //
   // Data received on socket
   //

   for (sockIdx = 0; sockIdx < MAX_CONNECTIONS; sockIdx++)
   {
      if (connectionSocketArr[sockIdx] != INVALID_SOCKET)
      {
         if (FD_ISSET (connectionSocketArr[sockIdx], &fdSet))
         {
            recvResult = recv (connectionSocketArr[sockIdx],
                               (char *) bufferArr, sizeof (bufferArr), 0);
            sendResult = 0;
            replyCnt = 0;

            //
            // Process client message
            //
            if (recvResult >= PREFIX_LEN) // Process only minimum message sizes
            {
               short dataLen;

               dataLen = (short) ((bufferArr[4] << 8) | (bufferArr[5] & 0xFF));
               // Validate length before processing message
               if ((dataLen + PREFIX_LEN) == recvResult)
               {
                  replyCnt = processMessage(&bufferArr[PREFIX_LEN],
                                            recvResult - PREFIX_LEN);

                  // The first two bytes (msg id) are returned untouched
                  bufferArr[2] = 0; // protocol identifier
                  bufferArr[3] = 0; // protocol identifier
                  bufferArr[4] = (char) ((replyCnt) >> 8);
                  bufferArr[5] = (char) ((replyCnt) & 0xFF);
                  sendResult = send(connectionSocketArr[sockIdx],
                                    (char *) bufferArr,
                                    replyCnt + PREFIX_LEN, 0);
               }
            }
            //
            // Check for disconnection and errors
            //
            if ((recvResult < PREFIX_LEN) ||
                (sendResult != replyCnt + PREFIX_LEN))
            {
               //
               // Free socket
               //
               shutdown(connectionSocketArr[sockIdx], SD_BOTH);
               closesocket(connectionSocketArr[sockIdx]);
               connectionSocketArr[sockIdx] = INVALID_SOCKET;
               if (recvResult == 0)
                  TRACELOG2("Disconnected slot %d nicely by other peer.\n",
                            sockIdx);
               else
                  TRACELOG2("Forced disconnection on slot %d!\n", sockIdx);
            }
         }
      }
   }
   return iReturnCode;
}

Public Function ChangeFormat(ByVal dtm As String) As Date
        Dim temp As String = ""
        temp = Mid(dtm, 4, 2) & "/"
        temp = temp & Mid(dtm, 1, 2) & "/"
        temp = temp & Mid(dtm, 7, 4) & " "
        temp = temp & Mid(dtm, 12)
        ChangeFormat = CDate(temp)
    End Function
    Private Sub cmdimport_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles cmdimport.Click
        Try
            If connect2008() = True Then
                If MsgBox("Do you want to export data to server?", MsgBoxStyle.YesNo) = MsgBoxResult.Yes Then
                    Dim _cmd As New SqlCommand("", connchip)
                    Dim i As Integer = 0
                    Dim strsql2 As String = ""
                    Dim tmp As String = ""
                    Dim ln() As String
                    Dim f As New System.IO.StreamReader("\ticketpro\export\" & Format(Now, "yyyyMMdd") & "HH.txt")
                    While Not f.EndOfStream
                        tmp = f.ReadLine
                        ln = tmp.Split(",")
                        strsql2 = "insert into handheld ("
                        strsql2 = strsql2 & "dat, "
                        strsql2 = strsql2 & "ticketnum, "
                        strsql2 = strsql2 & "stationid, "
                        strsql2 = strsql2 & "hhid, "
                        strsql2 = strsql2 & "status) values ("
                        strsql2 = strsql2 & "'" & ChangeFormat(ln(1)) & "', "
                        strsql2 = strsql2 & "'" & ln(2) & "', "
                        strsql2 = strsql2 & ln(0) & ", "
                        strsql2 = strsql2 & ln(4) & ", "
                        strsql2 = strsql2 & "'" & ln(3) & "') "
                        _cmd = New SqlCommand(strsql2, connchip)
                        _cmd.ExecuteNonQuery()
                    End While
                    _cmd.Dispose()
                    f.Close()
                    f.Dispose()
                    connchip.Close()
                    MsgBox("Export Done")
                Else
                    MsgBox("Server not in range")
                End If
            End If
        Catch ex As Exception
            MsgBox("import error " & ex.ToString)
        End Try
    End Sub
    Public Function connect2008() As Boolean
        connect2008 = False
        Dim path As String
        Dim database As String
        Dim temp As String = ""
        Dim temp2(15) As String
        Dim server As String
        Dim FileReader As StreamReader
        FileReader = New StreamReader("\ticketpro\chip.txt")
        temp = FileReader.ReadToEnd()
        temp2 = Split(temp, ",")
        FileReader.Close()
        database = temp2(8)
        server = temp2(7)
        path = "Data Source=eazzi-pc\SQLEXPRESS2012;Initial Catalog=ticketprozaarour; User Id=system; Password=startup;"
        Try
            connchip = New SqlConnection(path)
            connchip.Open()
            connect2008 = True
        Catch ex As Exception
            connect2008 = False
            MsgBox("error in function connect 2008")
        End Try
    End Function
      Private Sub TImageButton1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles TImageButton1.Click
        Me.Close()
    End Sub
End Class

private void myPivot_SelectionChanged(object sender, SelectionChangedEventArgs e)
        {
            if (e.AddedItems.Count > 0)
            {
                //Remove old Items
               // Add New Item to Page collection (Pages.Add())
               //Show only 1 pivot item (Users should see other pivot item headers)
            }

        }

<ScrollViewer VerticalScrollBarVisibility="Visible">
                    <TextBlock x:Name="txt" Foreground="White" FontSize="40"/>
    </ScrollViewer>

for (var i = 0; i < 50; i++)
                txt.Text += counter++ + Environment.NewLine;