Click here to Skip to main content
15,177,535 members
Articles / Desktop Programming / WPF
Posted 24 Jul 2008


241 bookmarked

A WPF Pie Chart with Data Binding Support

Rate me:
Please Sign up or sign in to vote.
4.96/5 (86 votes)
24 Jul 2008CPOL14 min read
This article describes the development of an interactive pie chart which uses data binding.




The Windows Presentation Framework provides developers with a toolset for developing visually rich and interactive user interfaces. Charts are a highly effective way of presenting data to a user, with pie charts providing a simple mechanism for comparing the relative magnitudes of different items. WPF does not provide a charting library, and there is no ‘official’ library that can be purchased as an extension. For this reason, there are a number of articles on the Internet which provide simple charting controls.

For pie charts, CodeProject has a 3D pie chart library, elsewhere you can find a Silverlight pie chart. However, neither of these controls take full advantage of data binding. In each case, the data is presented to the pie chart control as an array of pie data objects (either programmatically, or via XAML). Therefore, in order to visualise your data, you must copy the relevant properties of your data objects into the ‘pie data objects’. When reviewing these libraries for possible use in a project, it struck me that the way they work reflects how UI frameworks used to work before binding; i.e., the control has a model behind it, and it is your job as the developer to copy your data into this model so that the control (view) can render it. It is, of course, also your job to ensure that changes in the ‘real’ data are copied across to the model that backs your view, effectively keeping the two synchronised. With data binding, shunting data between different incompatible models should be a thing of the past!

This article describes the development of a pie chart user control for WPF that uses data binding. The pie chart is not backed by its own model, rather, it binds directly to your data objects. This has the big advantage that the WPF framework takes care of handling events that relate to changes in the bound data, updating the pie chart view accordingly. Along the way, a few other areas of interest will be covered:

  • The peculiarities of Tooltips and data binding
  • The use of FrameworkElement.Tag as a mechanism for passing data around
  • The development of custom shapes
  • Dependency Property Inheritance

The code that is associated with this article is not intended to be a complete, fully featured pie charting library. Anyone who has attempted to develop a charting library in the past will know that this is a huge undertaking! Instead, it is meant to be a useful starting point for anyone wishing to add their own custom charts to a project.

Step one: Our first slice

The flexibility of the WPF graphics API makes constructing a pie piece a relatively straightforward task, with a pie piece being little more than a Path consisting of a couple of LineSegments and an ArcSegment. It is possible to render a pie chart by programmatically adding suitable paths to our control; however, this approach is a little inflexible. For example, animation within WPF relies on the presence of Dependency Properties. As a result of this, if an attribute of our object is not exposed as a dependency property, it cannot be animated. Ideally, we would like to be able to animate these pie pieces, perhaps smoothly increasing their wedge size, or rotating it around the centre of the pie.

Thankfully, it is a straightforward task to create our own custom shapes, with Tomer Shamam’s article on CodeProject giving a good introduction. The following code snippet shows how the geometry of our pie piece is defined:

private void DrawGeometry(StreamGeometryContext context)
    Point startPoint = new Point(CentreX, CentreY);

    Point innerArcStartPoint = 
      Utils.ComputeCartesianCoordinate(RotationAngle, InnerRadius);
    innerArcStartPoint.Offset(CentreX, CentreY);

    Point innerArcEndPoint = 
      Utils.ComputeCartesianCoordinate(RotationAngle + WedgeAngle, InnerRadius);
    innerArcEndPoint.Offset(CentreX, CentreY);

    Point outerArcStartPoint = 
      Utils.ComputeCartesianCoordinate(RotationAngle, Radius);
    outerArcStartPoint.Offset(CentreX, CentreY);

    Point outerArcEndPoint = 
      Utils.ComputeCartesianCoordinate(RotationAngle + WedgeAngle, Radius);
    outerArcEndPoint.Offset(CentreX, CentreY);

    bool largeArc = WedgeAngle>180.0;
    Size outerArcSize = new Size(Radius, Radius);
    Size innerArcSize = new Size(InnerRadius, InnerRadius);

    context.BeginFigure(innerArcStartPoint, true, true);
    context.LineTo(outerArcStartPoint, true, true);
    context.ArcTo(outerArcEndPoint, outerArcSize, 0, largeArc, 
                  SweepDirection.Clockwise, true, true);
    context.LineTo(innerArcEndPoint, true, true);
    context.ArcTo(innerArcStartPoint, innerArcSize, 0, largeArc, 
                  SweepDirection.Counterclockwise, true, true);

The ComputeCartesianCoordinate method is a static utility method for converting between Polar and Cartesian coordinates. The variables, CentreX, CentreY, Radius etc… are all dependency properties. This is pretty much all that is needed to define a custom shape. The WPF ArcSegment and the signature of Geometry.ArcTo() method can be a little tricky to understand. Fortunately, Charles Petzold has published a very good article describing the Mathematics of ArcSegment with a number of illustrated examples.

The example below shows the pie piece in action, with the shapes being defined within XAML; however, they can, of course, be added programmatically in the code-behind.

<Window x:Class="WPFPieChart.Window1" 
    Title="Pie Pieces" Height="200" Width="200">  
        <b:PiePiece CentreX="50" CentreY="80" RotationAngle="45" WedgeAngle="45"
                    Radius="80" InnerRadius="20" Fill="Beige" Stroke="Black"/>
        <b:PiePiece CentreX="50" CentreY="80" RotationAngle="95" WedgeAngle="15"
                    Radius="90" InnerRadius="40" Fill="Chocolate" Stroke="Black"/>
        <b:PiePiece CentreX="30" CentreY="70" RotationAngle="125" WedgeAngle="40"
                    Radius="80" InnerRadius="0" Fill="DodgerBlue" Stroke="Black"/>


Step two: Making a pie

Once we have a pie piece shape, the next job is to assemble the pieces into a pie chart within a user control. I did consider the idea of using an ItemsControl or one of its sub-classes as the basis for this control, supplying it a suitable control layout and item template. The ItemsControl has certainly been proven to be very flexible, one of the most notable examples being Beatriz Costa’s Solar System styling. However, this approach hit a dead end when trying to introduce Polar transformations. Unfortunately, it is not possible to sub-class the abstract Transform base class, due to the presence of internal methods. If someone out there can demonstrate how to modify an ItemsControl so that the items it contains are rendered around a circle to produce a pie chart, I would love to hear from them!

In my solution, the pie pieces are assembled into a pie chart within a user control, PiePlotter. Because this control uses data binding, we can simply use the DataContext property to find the data that is being plotted. A pie chart, unlike a grid (ListView) is only able to plot one attribute of our data. For example, we might want to plot attributes of a stock portfolio as a pie chart. The positions (i.e., items) within our portfolio might include attributes such a quantity, market cap, value, etc… With a pie chart, we are only able to plot one of these attributes at a time. For this reason, PiePlotter has a dependency property PlottedProperty that indicates which attribute of the data should be displayed. This allows us to extract the data which relates to this attribute from each item, as follows:

private double GetPlottedPropertyValue(object item)
    PropertyDescriptorCollection filterPropDesc = TypeDescriptor.GetProperties(item);
    object itemValue = filterPropDesc[PlottedProperty].GetValue(item);
    return (double)itemValue;

In order to render the data as a pie chart, we first obtain the CollectionView from the DataContext. The next step is to total the values for the plotted attribute so that we can scale them to fit within a 360° pie chart. Finally, we iterate over the collection, determining the wedge angle of the pie piece that represents it, accumulating the total of all the pie pieces as we assemble the pie chart in a clockwise direction.

private void ConstructPiePieces()
    CollectionView myCollectionView = (CollectionView)
    if (myCollectionView == null)

    double halfWidth = this.Width / 2;
    double innerRadius = halfWidth * HoleSize;            

    // compute the total for the property which is being plotted
    double total = 0;
    foreach (Object item in myCollectionView)
        total += GetPlottedPropertyValue(item);
    // add the pie pieces
    double accumulativeAngle=0;
    foreach (Object item in myCollectionView)
        double wedgeAngle = GetPlottedPropertyValue(item) * 360 / total;

        PiePiece piece = new PiePiece()
            Radius = halfWidth,
            InnerRadius = innerRadius,
            CentreX = halfWidth,
            CentreY = halfWidth,
            WedgeAngle = wedgeAngle,
            RotationAngle = accumulativeAngle,
            Fill = Brushes.Green

        canvas.Children.Insert(0, piece);

        accumulativeAngle += wedgeAngle;

The PiePlotter control can now be dropped into a window that has a suitable DataContext, with the PlottedProperty indicating which attribute of the data to display, as illustrated below:


<Window x:Class="WPFPieChart.Window1" 
    Title="Pie Chart Databinding" Height="300" Width="300">
      <c:PiePlotter PlottedProperty="Benchmark" Width="250" Height="250"/>

Step three: Binding the pie

The code shown above provides a straightforward method for rendering an attribute of our data as a pie chart. However, if the bound data changes, either due to a change in the property values of one of the items, or if a new item is added/removed to the collection, the pie chart is not updated.

These are two separate problems: changes to the bound items, and changes to the bound collection. We will consider each in turn.

Bound objects must implement the INotifyPropertyChanged interface in order to notify the view that a change has occurred and that this should be reflected in the UI. Because our control binds to a collection, we must iterate over the collection, adding an event listener for each of the bound items. This is performed within a handler for the FrameworkElement.DataContextChanged event, as shown below:

void DataContextChangedHandler(object sender, 
              DependencyPropertyChangedEventArgs e)
    CollectionView myCollectionView = (CollectionView)

    foreach (object item in myCollectionView)
        if (item is INotifyPropertyChanged)
            INotifyPropertyChanged observable = (INotifyPropertyChanged)item;
            observable.PropertyChanged += 
               new PropertyChangedEventHandler(ItemPropertyChanged);

private void ItemPropertyChanged(object sender, PropertyChangedEventArgs e)
    // if the property which this pie chart
    // represents has changed, re-construct the pie
    if (e.PropertyName.Equals(PlottedProperty))

Whenever a property changes that matches the PlottedProperty of this pie chart, the chart is reconstructed. Note, this could be improved a little. Rather than disposing of all the pie pieces and reconstructing the chart from scratch, the dependency properties of the existing pie pieces could be adjusted accordingly, possibly even using an animation.

The above code takes care of property value changes in the bound items, but what about when items are added or removed from the bound collection? To be able to support this, the WPF framework has another interface, INotifyCollectionChanged, which has a single CollectionChanged event which is raised when items are added or removed, or the collection is cleared. In order to accommodate changes in the bound collection, we need to handle this event as follows, with the handler simply reconstructing the pie chart:

// handle the events that occur when the bound collection changes
if (this.DataContext is INotifyCollectionChanged)
    INotifyCollectionChanged observable = 
    observable.CollectionChanged += 
        new NotifyCollectionChangedEventHandler(BoundCollectionChanged);

Step four: Adding interactivity

So far, the pie chart is flexible in its functionally, but it is a bit plain and lacks interactivity. One useful interactive feature would be to reflect the currently selected item in the bound collection, with an animation that pulls out the currently selected piece.


This can be achieved quite simply by handling the CollectionView.CurrentChanged event, animating the respective pie piece:

void CollectionViewCurrentChanged(object sender, EventArgs e)
    CollectionView collectionView = (CollectionView)sender;

    PiePiece piece = piePieces[collectionView.CurrentPosition];

    DoubleAnimation a = new DoubleAnimation();
    a.To = 10;
    a.Duration = new Duration(TimeSpan.FromMilliseconds(200));

    piece.BeginAnimation(PiePiece.PushOutProperty, a);            

Note that in order to allow navigation from an index in the collection view to a pie piece, a ListpiePieces’ is populated during the construction of the chart. Also, to facilitate navigation in the other direction, from the pie piece to the item in the collection, the item index is stored in the Tag property of FrameworkElement. This allows us to add an event handler to each pie piece so that when it is clicked, the item is selected within the bound collection:

void PiePieceMouseUp(object sender, MouseButtonEventArgs e)
    CollectionView collectionView = (CollectionView)

    PiePiece piece = sender as PiePiece;

    // select the item which this pie piece represents
    int index = (int)piece.Tag;

Step five: Tooltip confusion

Tooltips can be used to provide further contextual information. However, simply adding the tooltip to each pie piece does not have the desired effect. The DataContext for the pie piece will be inherited from the PiePlotter and will be a collection. A ToolTip bound to this same DataContext will display information relating to the currently selected item, which will not always be the same as the piece that the user mouse-overs to reveal the tooltip. To solve this problem, the FrameworkElement.ToolTipOpening is handled, allowing us to modify the DataContext prior to the rendering of the Tooltip:

void PiePieceToolTipOpening(object sender, ToolTipEventArgs e)
    PiePiece piece = (PiePiece)sender;

    CollectionView collectionView = (CollectionView)
    // select the item which this pie piece represents
    int index = (int)piece.Tag;
    ToolTip tip = (ToolTip)piece.ToolTip;
    tip.DataContext = collectionView.GetItemAt(index);

Again, the Tag property of the pie piece is used to good effect.

With this in place, the ContentTemplate of the Tooltip can be modified to provide a summary of the data which the pie piece represents. Unfortunately, data binding within a Tooltip is not as straightforward as it is for other controls. A Tooltip is displayed in a new window; therefore, they do not appear in the logical tree of the parent window, and for this reason, they do not inherit properties. This has been the subject of a number of blog posts which describe how to perform data binding within tooltips, and how to make ElementName bindings work. The upshot of this is that you have to manually obtain the DataContext for your Tooltip. Thankfully, this is easily achieved using a RelativeSource binding to connect the two DataContexts together. RelativeSource is a powerful concept which can be used in many interesting and surprising ways, more on this one later. The Tooltip DataTemplate below illustrates how the percentage that a pie piece represents (which is a dependency property of the pie piece) can be located by setting the DataContext of the TextBlock to the PlacementTarget of our Tooltip, which is the pie piece which the Tooltip is ‘attached’ to. The Text property of the TextBlock is then bound to the Percentage property with a suitable value converter.

    <!--<span class="code-comment"> bind the stack panel datacontext to the tooltip data context --></span>
    <StackPanel Orientation="Horizontal"
            DataContext="{Binding Path=DataContext, RelativeSource={RelativeSource 
                          AncestorType={x:Type ToolTip}}}">
        <!--<span class="code-comment"> navigate to the pie piece (which is the placement 
             target of the tooltip) and obtain the percentage --></span>
        <TextBlock FontSize="30" FontWeight="Bold" Margin="0,0,5,0"                        
                DataContext="{Binding Path=PlacementTarget, 
                             RelativeSource={RelativeSource AncestorType={x:Type ToolTip}}}"
                Text="{Binding Path=Percentage, Converter={StaticResource 
                      formatter}, ConverterParameter='\{0:0%\}'}"/>

        <StackPanel Orientation="Vertical">                                  
            <TextBlock FontWeight="Bold"  Text="{Binding Path=Class}"/>
            <StackPanel Orientation="Horizontal">
                <TextBlock Text="Fund"/>                               
                <TextBlock Text=": "/>
                <TextBlock Text="{Binding Path=Fund}"/>
            <StackPanel Orientation="Horizontal">
                <TextBlock Text="Benchmark"/>                               
                <TextBlock Text=": "/>
                <TextBlock Text="{Binding Path=Benchmark}"/>

A bit of opacity and a drop shadow applied via the control template gives the following:


Step six: I Am Legend

A pie chart is not much use without a legend which indicates the meaning of each pie piece:


The Legend class is another user control, i.e., it is a distinct re-useable unit that is not tightly-coupled with the PiePlotter control. This allows for a greater level of flexibility. The layout of the pie chart (which comprises the pie itself plus the legend) can be controlled via XAML, allowing charts with different visual configurations. Both the Legend and the PiePlotter will share a number of dependency properties, such as PlottedProperty. It makes sense to wrap the two controls in another user control which defines the layout:

<UserControl x:Class="ScottLogic.Controls.PieChart.PieChartLayout" ...>
        <StackPanel Orientation="Horizontal">
            <c:PiePlotter Margin="10" Height="200" Width="200" HoleSize="0.3"/>
            <c:Legend Margin="10" Height="200" Width="200" />

The common dependency properties can be defined on the PieChartLayout control which can pass it to the Legend and PiePlotter via dependency property inheritance. One thing that is worthy of note here is that dependency properties can only participate in inheritance if they are attached properties. This is not immediately obvious, and has caused others some confusion.

The Legend control itself is not much more than a ListBox with a DataTemplate applied to provide the required visual appearance. The title of the Legend is obtained from the PlottedProperty dependency property via a RelativeSource binding:

<TextBlock TextAlignment="Center" Grid.Column="1" FontSize="20" FontWeight="Bold"
        Text="{Binding Path=(c:PieChartLayout.PlottedProperty),
        RelativeSource={RelativeSource AncestorType={x:Type c:Legend}}}"/>

Because the dependency property is an attached property, the binding path has a slightly different syntax, again another area that causes confusion!

The data template for the legend’s listbox is shown below:

    <Grid HorizontalAlignment="Stretch" Margin="3">
            <SolidColorBrush Color="#EBEBEB"/>
            <ColumnDefinition Width="20"/>
            <ColumnDefinition Width="120"/>

        <Rectangle Grid.Column="0" Width="13" 
                   Height="13" Tag="{Binding}"
                   Fill="{Binding RelativeSource={RelativeSource Self}, 
                         Converter={StaticResource colourConverter}}"/>
        <TextBlock Grid.Column="1" Margin="3" Text="{Binding Path=Class}"/>

        <TextBlock Grid.Column="2" Margin="3" Tag="{Binding}"
                   Text="{Binding RelativeSource={RelativeSource Self}, 
                         Converter={StaticResource legendConverter}}"/>

The Fill for the rectangle and the Text of the second TextBlock are derived from a slightly unusual binding. The TextBlock displays the value of the property which the pie chart is displaying, as defined by PlottedProperty. In other words, the property of the data object which is being bound to is variable.

For the TextBlock, it would be nice to be able to specify the binding path value as being derived from the PlottedProperty dependency property (via a RelativeSource binding, of course!). However, this is not possible, only dependency properties can have bindings. Binding.Path is plain-old CLR property. To side-step this problem, I used a trick inspired, in part, by Mike Hillberg’s blog post about parameterized templates, where he uses the Button's Tag property to pass an image URI to a data template.

In order to extract the plotted property value from the item, we need two pieces of information: firstly, the PlottedProperty dependency property; secondly, the item itself. Value converters are not part of the visual tree; therefore, we cannot navigate up to the Legend control to discover the PlottedProperty value. The trick here is to pass the TextBlock to the value converter via a RelativeSource binding of type Self, allowing the value converter to navigate the visual tree. The item bound to the ListBoxItem is bound to the Tag property. Again, this can be picked up within the value converter. The code which performs this is given below:

public class LegendConverter : IValueConverter
    public object Convert(object value, Type targetType,
        object parameter, CultureInfo culture)
        // the item which we are displaying is bound to the Tag property
        TextBlock label = (TextBlock)value;
        object item = label.Tag;

        // find the item container
        DependencyObject container = (DependencyObject)
          Helpers.FindElementOfTypeUp((Visual)value, typeof(ListBoxItem));

        // locate the items control which it belongs to
        ItemsControl owner = ItemsControl.ItemsControlFromItemContainer(container);

        // locate the legend
        Legend legend = (Legend)Helpers.FindElementOfTypeUp(owner, typeof(Legend));
        // extract the ‘plottedproperty’ value from the item
        PropertyDescriptorCollection filterPropDesc = TypeDescriptor.GetProperties(item);
        object itemValue = filterPropDesc[legend.PlottedProperty].GetValue(item);

        return itemValue;

    public object ConvertBack(object value, Type targetType,
        object parameter, CultureInfo culture)
        throw new NotImplementedException();

Helpers is a set of visual tree navigation utilities written by Andrew Whiddett. Note also that the navigation is a two step process, first locating the ListBoxItem parent, then locating the ItemsControl via ItemsControlFromItemContainer. This is because the container elements within an ItemsControl are not children of the ItemsControl.

Josh Smith describes a solution to a similar class of problems in his article on adding “Virtual Branches” to the logical tree, solving the problem of obtaining dependency property values within a validation rule.

Step seven: A splash of colour

The addition of colour to the pie chart is an interesting problem. An easy solution would be to mandate that the items bound to the control have a property which specifies their colour. However, forcing the data objects to expose specific properties is exactly the thing that we are trying to avoid. Realistically, the colour of an item can depend on one of two things: either the item itself (perhaps derived from one of its properties somehow), or the index of the item within the collection. For this purpose, we define a simple interface with a single method:

public interface IColorSelector
    Brush SelectBrush(object item, int index);

With an IColorSelector instance, the Legend and PiePlotter can obtain the correct Brush to use when plotting a pie piece or the colour panel in the legend which it relates to. A very simple implementation, shown below, has an array of brushes which are cycled through to select a colour:

public class IndexedColourSelector : DependencyObject, IColorSelector

    /// <span class="code-SummaryComment"><summary></span>
    /// An array of brushes
    /// <span class="code-SummaryComment"></summary></span>
    public Brush[] Brushes
    {... }

    public Brush SelectBrush(object item, int index)
        if (Brushes == null || Brushes.Length == 0)
            return System.Windows.Media.Brushes.Black;
        return Brushes[index % Brushes.Length];

An instance of the above can be provided to the pie chart through XAML:

<Window >
        <x:ArrayExtension Type="{x:Type Brush}" x:Key="brushes">
            <SolidColorBrush Color="#9F15C3"/>
            <SolidColorBrush Color="#FF8E01"/>
            <SolidColorBrush Color="#339933"/>
            <SolidColorBrush Color="#00AAFF"/>
            <SolidColorBrush Color="#818183"/>
            <SolidColorBrush Color="#000033"/>
        <c:PieChartLayout PlottedProperty="Fund" Margin="10">
                <c:IndexedColourSelector Brushes="{StaticResource brushes}"/>


The sample code attached to this article displays the pie chart shown below. The legend, pie chart, list view, and item details are all synchronised via data binding. Clicking on the column headings within the list view will cause the pie chart to plot the selected property of the dataset.


Whilst it takes a bit more effort to create a chart which supports data binding, the end result is a much more interactive control and one which is much easier to re-use.


  • 25/07/2008 - Initial article upload.


This article, along with any associated source code and files, is licensed under The Code Project Open License (CPOL)


About the Author

Colin Eberhardt
Architect Scott Logic
United Kingdom United Kingdom
I am CTO at ShinobiControls, a team of iOS developers who are carefully crafting iOS charts, grids and controls for making your applications awesome.

I am a Technical Architect for Visiblox which have developed the world's fastest WPF / Silverlight and WP7 charts.

I am also a Technical Evangelist at Scott Logic, a provider of bespoke financial software and consultancy for the retail and investment banking, stockbroking, asset management and hedge fund communities.

Visit my blog - Colin Eberhardt's Adventures in .NET.

Follow me on Twitter - @ColinEberhardt


Comments and Discussions

QuestionChart Pin
Member 433509019-May-17 14:22
MemberMember 433509019-May-17 14:22 
Questiongreat but i need to count the answers Pin
Member 1289988020-Mar-17 2:36
MemberMember 1289988020-Mar-17 2:36 
Questionnice work....Thank You..... Pin
Member 1288029030-Nov-16 19:52
MemberMember 1288029030-Nov-16 19:52 
QuestionBug on 100% Pin
Galma8824-Jun-15 23:23
MemberGalma8824-Jun-15 23:23 
AnswerRe: Bug on 100% Pin
Member 983709921-Sep-15 21:55
MemberMember 983709921-Sep-15 21:55 
GeneralRe: Bug on 100% Pin
hell6926-Aug-20 23:51
Memberhell6926-Aug-20 23:51 
GeneralMy vote of 1 Pin
Member 1112502627-May-15 12:42
MemberMember 1112502627-May-15 12:42 
GeneralEpic Pin
tumbledwyer17-Oct-14 3:02
professionaltumbledwyer17-Oct-14 3:02 
BugA great article Pin
Jecho Jekov5-Aug-14 15:19
MemberJecho Jekov5-Aug-14 15:19 
A very nice, well done and clean code. Great article!

One note though. For the binding to work properly (and perhaps other features of WPF) the names of the registered dependency properties should be exactly the same as the C# properties. For example, "DependencyProperty.Register("InnerRadius", ...) instead of "DependencyProperty.Register("InnerRadiusProperty", ...).
SuggestionLegend binding bottleneck Pin
Ferocactus13-May-14 0:20
MemberFerocactus13-May-14 0:20 
GeneralRe: Legend binding bottleneck Pin
Member 140088973-Nov-19 3:27
MemberMember 140088973-Nov-19 3:27 
Questionhow to use in MVVM parten Pin
windstory22-Jan-14 22:08
Memberwindstory22-Jan-14 22:08 
BugRe: how to use in MVVM parten Pin
Member 1112502627-May-15 12:31
MemberMember 1112502627-May-15 12:31 
QuestionHow To Add Title Property to PieChart Pin
Member 1004174714-Jan-14 6:42
MemberMember 1004174714-Jan-14 6:42 
QuestionLabels for Pie Pieces Pin
Member 103107089-Oct-13 1:08
MemberMember 103107089-Oct-13 1:08 
QuestionHelp needed to add two pie charts Pin
gaurav4797-Feb-13 2:36
Membergaurav4797-Feb-13 2:36 
QuestionGreat article! Pin
Ratish Philip17-Aug-12 7:56
MemberRatish Philip17-Aug-12 7:56 
GeneralGreat example Pin
cheezman19-Jul-12 11:15
Membercheezman19-Jul-12 11:15 
QuestionMy vote of 5 - great code!! Pin
wouterv816-Jun-12 22:32
Memberwouterv816-Jun-12 22:32 
GeneralMy vote of 5. Pin
Andrii Bykadorov26-Apr-12 2:22
MemberAndrii Bykadorov26-Apr-12 2:22 
GeneralMy vote of 5 Pin
MokhtarBouslimi3-Apr-12 0:20
MemberMokhtarBouslimi3-Apr-12 0:20 
QuestionDisplay just 1 360 peice. Pin
Member 461566927-Feb-12 9:24
MemberMember 461566927-Feb-12 9:24 
AnswerRe: Display just 1 360 peice. Pin
JoeNS23-May-13 1:16
MemberJoeNS23-May-13 1:16 
QuestionRe: Display just 1 360 peice. Pin
sreelal murukan20-May-14 21:16
Membersreelal murukan20-May-14 21:16 
AnswerRe: Display just 1 360 peice. Pin
cplotts23-Jul-14 14:21
Membercplotts23-Jul-14 14:21 

General General    News News    Suggestion Suggestion    Question Question    Bug Bug    Answer Answer    Joke Joke    Praise Praise    Rant Rant    Admin Admin   

Use Ctrl+Left/Right to switch messages, Ctrl+Up/Down to switch threads, Ctrl+Shift+Left/Right to switch pages.