Introduction

In this article, we will see how to create WCF REST based service. In this example, we will define two methods, GetSampleMethod (method type is GET) & PostSampleMethod (method type is POST).

GET method will take input as String & returns formatted String.
POST method will take input as XML (user registration) & return status string.

Note: One should have basic knowledge of what is WCF, why WCF & my article will discuss HOW to use WCF with webHttpBinding.

We will divide this article into the below sections:

Define WCF Service

Define Interface
Define Class
Implement POST & GET methods

Define Configuration for WCF Service

Service Configuration
Behavior Configuration

Smoke test WCF service (before client uses it)
Implement client code to use WCF service

Define WCF Service

Open VS 2010 & Select new Project, then select WCF & select WCF Service Application & name it as WCF Rest Based.
Now add new Service class to this application as “MyService.svc”
Open interface IMservice.cs & add the below code:

OperationContract: PostSampleMethod
WebInvoke Method Type = POST as we are implementing POST
URI Template defines the URL format by which this method is identified / linked.
Note: MethodName, URI Template name & Operation Contract names may not be same means they can be different

PostSampleMethod will accept XML string as input in POST method. Using Stream as input parameter, we can de-serialize input data before using it.

[OperationContract(Name = “PostSampleMethod”)]
        [WebInvoke(Method = “POST”,
         UriTemplate = “PostSampleMethod/New”)]
        string PostSampleMethod(Stream data);

OperationContract name: GetSampleMethod
WebGet attribute defined method type is GET
Need to include below namespaces:

System.ServiceModel.Web;
System.ServiceModel
System.Runtime.Serialization
System.IO
    [OperationContract(Name = “GetSampleMethod”)]
        [WebGet(UriTemplate = “GetSampleMethod/inputStr/{name}”)]
        string GetSampleMethod(string name);

Open MyService.cs class and provide implementation for the methods defined in IMyService Interface as shown below:

public string PostSampleMethod(Stream data)
    {
        // convert Stream Data to StreamReader
        StreamReader reader = new StreamReader(data);
        // Read StreamReader data as string
        string xmlString = reader.ReadToEnd();
        string returnValue = xmlString;
        // return the XMLString data
        return returnValue;
    }
    public string GetSampleMethod(string strUserName)
    {
        StringBuilder strReturnValue = new StringBuilder();
        // return username prefixed as shown below
        strReturnValue.Append(string.Format
		(”You have entered userName as {0}”, strUserName));
        return strReturnValue.ToString();
    }

Define Configuration for WCF Service

Open web.config as we need to define configuration for our WCF Service. If you want our service to be accessed as part of webHttp, then we need to define webHttpBinding & mexHttpBinding.
In System.ServiceModel defined configuration as shown below. To know details about the below config configuration, check out the URL: https://ch1blogs.cognizant.com/blogs/279850/2011/10/18/service-end-point-not-found/.
```
<services>
      <service name=”WcfRestBased.MyService” 
	behaviorConfiguration=”myServiceBehavior” >
        <endpoint name=”webHttpBinding”
                  address=”"
                  binding=”webHttpBinding”
                  contract=”WcfRestBased.IMyService”
                  behaviorConfiguration=”webHttp”
                  >
                </endpoint>
        <endpoint name=”mexHttpBinding”
                  address=”mex”
                  binding=”mexHttpBinding”
                  contract=”IMetadataExchange”
                  />
      </service>
    </services>
```
Service Name: To find what's to be given, right click the service & select ViewMarkup option.

Example, in my case, it is MyService.svc, look for Service attribute & use the complete string, in my case it is Service=”WcfRestBased.MyService”.

behaviorConfiguration: can be any name but this will be again used when we define behavior settings, in my case it is myServiceBehavior.

Endpoint for webHttpBinding
- endpoint name: should be webHttpBinding if you are configuring for web access
- address: we can leave it empty
- binding: should be webHttpBinding
- contract: should be Namespace.Interfacename. In my case, it is wcfRestBased.IMyService
- behaviorConfiguration: should be webHttp
EndPoint for mexHttpBinding

These values should be same as shown above.

Now define Service behavior as shown below in System.ServiceModel. “mySeriveBehavior” name should match behaviorConfiguration name defined in Service tag (shown above):

<behaviors>
      <serviceBehaviors>
        <behavior name=”myServiceBehavior” >
          <serviceMetadata httpGetEnabled=”true”/>
          <serviceDebug includeExceptionDetailInFaults=”false” />
        </behavior>
        <behavior>
          <!– To avoid disclosing metadata information, 
		set the value below to false and remove the metadata endpoint 
		above before deployment –>
          <serviceMetadata httpGetEnabled=”true”/>
          <!– To receive exception details in faults for debugging purposes, 
		set the value below to true. Set to false before deployment 
		to avoid disclosing exception information –>
          <serviceDebug includeExceptionDetailInFaults=”false”/>
        </behavior>
      </serviceBehaviors>
      <endpointBehaviors>
        <behavior name=”webHttp”>
          <webHttp/>
        </behavior>
      </endpointBehaviors>
    </behaviors>

Smoke Test WCF Service

Configure WCF Service in IIS
To check our WCF service is working properly, let's test it by opening MyService.svc in browser, in my case it is http://localhost/wcfrestbased/MyService.svc
To test our GET method service, you can call it by http://localhost/wcfrestbased/MyService.svc/GetSampleMethod/inputStr/suryaprakash & this shows up data as “You have entered userName as suryaprakash”.
By this, we can confirm our service is working fine.

Implement Client Code to Use WCF Service

Create new website application which will act as client to access WCF services.
Add a textbox to default.aspx page & name it as txtResult & open Default.aspx.cs

Define below function which will call rest service to fetch the data. This method will call POSTSAMPLEMETHOD in service (MyService) implemented. Inline code comments are added.

void CallPostMethod()
        {
            // Restful service URL
            string url = 
	     “http://localhost/wcfrestbased/myservice.svc/PostSampleMethod/New“;

            // declare ascii encoding
            ASCIIEncoding encoding = new ASCIIEncoding();
            string strResult = string.Empty;
            // sample xml sent to Service & this data is sent in POST
            string SampleXml = @”<parent>” +
                    “<child>” +
                        “<username>username</username>” +
                        “<password>password</password>” +
                    “</child>” +
                  “</parent>”;
            string postData = SampleXml.ToString();
            // convert xmlstring to byte using ascii encoding
            byte[] data = encoding.GetBytes(postData);
            // declare httpwebrequet wrt url defined above
            HttpWebRequest webrequest = (HttpWebRequest)WebRequest.Create(url);
            // set method as post
            webrequest.Method = “POST”;
            // set content type
            webrequest.ContentType = “application/x-www-form-urlencoded”;
            // set content length
            webrequest.ContentLength = data.Length;
            // get stream data out of webrequest object
            Stream newStream = webrequest.GetRequestStream();
            newStream.Write(data, 0, data.Length);
            newStream.Close();
            // declare & read response from service
            HttpWebResponse webresponse = (HttpWebResponse)webrequest.GetResponse();

            // set utf8 encoding
            Encoding enc = System.Text.Encoding.GetEncoding(”utf-8?);
            // read response stream from response object
            StreamReader loResponseStream = 
		new StreamReader(webresponse.GetResponseStream(), enc);
            // read string from stream data
            strResult = loResponseStream.ReadToEnd();
            // close the stream object
            loResponseStream.Close();
            // close the response object
            webresponse.Close();
            // below steps remove unwanted data from response string
            strResult = strResult.Replace(”</string>”, “”);
            strResult = strResult.Substring(strResult.LastIndexOf(’>

Now let's go ahead and implement code to call GETSAMPLEMETHOD from client application. The below code has inline comments:

void CallGetMethod()
        {
            // Restful service URL
            string url = “http://localhost/wcfrestbased/myservice.svc/
			GetSampleMethod/inputStr/suryaprakash“;
            string strResult = string.Empty;
            // declare httpwebrequet wrt url defined above
            HttpWebRequest webrequest = (HttpWebRequest)WebRequest.Create(url);
            // set method as post
            webrequest.Method = “GET”;
            // set content type
            webrequest.ContentType = “application/x-www-form-urlencoded”;
            // declare & read response from service
            HttpWebResponse webresponse = (HttpWebResponse)webrequest.GetResponse();
            // set utf8 encoding
            Encoding enc = System.Text.Encoding.GetEncoding(”utf-8?);
            // read response stream from response object
            StreamReader loResponseStream = new StreamReader
				(webresponse.GetResponseStream(), enc);
            // read string from stream data
            strResult = loResponseStream.ReadToEnd();
            // close the stream object
            loResponseStream.Close();
            // close the response object
            webresponse.Close();
            // assign the final result to text box
           txtResult.Text = strResult;
        }

Now go ahead and call the above methods to see the output of each method.

Happy coding… hope this helps!

History

29^th October, 2011: Initial version

Developing WCF Restful Services with GET and POST Methods